I'm having lamtest errors and problems. See some of the error that are
being returned in the attached packages. Anyone have any suggestions or
recommendations? Thanks in advanced.
the uname -a is
Linux mg56 2.6.5-7.276-smp #1 SMP Fri Sep 28 20:33:22 AKDT 2007 x86_64
x86_64 x86_64 GNU/Linux
mg56 116% laminfo
LAM/MPI: 7.1.4
Prefix: /import/home/u1/uaf/ogorman/lam
Architecture: x86_64-unknown-linux-gnu
Configured by: ogorman
Configured on: Tue Jan 22 11:24:19 AKST 2008
Configure host: mg56
Memory manager: ptmalloc2
C bindings: yes
C++ bindings: yes
Fortran bindings: yes
C compiler: gcc
C++ compiler: g++
Fortran compiler: g77
Fortran symbols: double_underscore
C profiling: yes
C++ profiling: yes
Fortran profiling: yes
C++ exceptions: no
Thread support: yes
ROMIO support: yes
IMPI support: no
Debug support: no
Purify clean: no
SSI boot: globus (API v1.1, Module v0.6)
SSI boot: rsh (API v1.1, Module v1.1)
SSI boot: slurm (API v1.1, Module v1.0)
SSI coll: lam_basic (API v1.1, Module v7.1)
SSI coll: shmem (API v1.1, Module v1.0)
SSI coll: smp (API v1.1, Module v1.2)
SSI rpi: crtcp (API v1.1, Module v1.1)
SSI rpi: ib (API v1.1, Module v1.0)
SSI rpi: lamd (API v1.0, Module v7.1)
SSI rpi: sysv (API v1.0, Module v7.1)
SSI rpi: tcp (API v1.0, Module v7.1)
SSI rpi: usysv (API v1.0, Module v7.1)
SSI cr: self (API v1.0, Module v1.0)
mg56 117% mpicc -showme
gcc -I/import/home/u1/uaf/ogorman/lam/include -pthread -L/import/home/u1/uaf/ogorman/lam/lib -llammpio -llamf77mpi -lmpi -llam -laio -laio -lutil -lmosal -lmpga -lmtl_common -lvapi -ldl
mg56 121% ./configure "CFLAGS=-fPIC" --prefix=/import/home/u1/uaf/ogorman/lam ; make
Configuring LAM test suite version 7.1.4
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for mpicc... yes
checking for gcc... mpicc
checking for C compiler default output file name... a.out
checking whether the C compiler works... configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details.
make: *** No targets specified and no makefile found. Stop.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ ./configure CFLAGS=-fPIC --prefix=/import/home/u1/uaf/ogorman/lam --enable-shared --disable-static
## --------- ##
## Platform. ##
## --------- ##
hostname = mg56
uname -m = x86_64
uname -r = 2.6.5-7.276-smp
uname -s = Linux
uname -v = #1 SMP Fri Sep 28 20:33:22 AKDT 2007
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/pkg/pathscale/pathscale-2.5/bin
PATH: /usr/local/pkg/voltairempi/voltairempi-S-1/mpi.pathcc.rsh/bin
PATH: /usr/mellanox/bin
PATH: /usr/voltaire/scripts
PATH: /usr/voltaire/bin
PATH: /usr/software/krb5/bin
PATH: /usr/software/bin
PATH: /opt/gnome/bin
PATH: /usr/games
PATH: /usr/bin/X11
PATH: /usr/software/krb5/bin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/bin
PATH: /usr/software/pkg/ssh/openssh-4.4p1a/bin
PATH: /usr/lib/java/jre/bin
PATH: /usr/local/bin
PATH: /usr/pbs/bin
PATH: /usr/local/pkg/gmt/current/bin
PATH: /usr/local/pkg/gmt/current/share
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1730: checking for a BSD-compatible install
configure:1785: result: /usr/bin/install -c
configure:1796: checking whether build environment is sane
configure:1839: result: yes
configure:1904: checking for gawk
configure:1920: found /usr/bin/gawk
configure:1930: result: gawk
configure:1940: checking whether make sets $(MAKE)
configure:1960: result: yes
configure:2124: builddir: /u1/uaf/ogorman/lam-7.1.4
configure:2126: srcdir: /u1/uaf/ogorman/lam-7.1.4
configure:2162: checking build system type
configure:2180: result: x86_64-unknown-linux-gnu
configure:2208: checking host system type
configure:2222: result: x86_64-unknown-linux-gnu
configure:2670: checking if want debugging output support
configure:2684: result: no
configure:2745: checking for gcc
configure:2761: found /usr/bin/gcc
configure:2771: result: gcc
configure:3015: checking for C compiler version
configure:3018: gcc --version </dev/null >&5
gcc (GCC) 3.3.3 (SuSE Linux)
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3021: $? = 0
configure:3023: gcc -v </dev/null >&5
Reading specs from /usr/lib64/gcc-lib/x86_64-suse-linux/3.3.3/specs
Configured with: ../configure --enable-threads=posix --prefix=/usr --with-local-prefix=/usr/local --infodir=/usr/share/info --mandir=/usr/share/man --enable-languages=c,c++,f77,objc,java,ada --disable-checking --libdir=/usr/lib64 --enable-libgcj --with-gxx-include-dir=/usr/include/g++ --with-slibdir=/lib64 --with-system-zlib --enable-shared --enable-__cxa_atexit x86_64-suse-linux
Thread model: posix
gcc version 3.3.3 (SuSE Linux)
configure:3026: $? = 0
configure:3028: gcc -V </dev/null >&5
gcc: `-V' option must have argument
configure:3031: $? = 1
configure:3054: checking for C compiler default output file name
configure:3057: gcc -fPIC conftest.c >&5
configure:3060: $? = 0
configure:3106: result: a.out
configure:3111: checking whether the C compiler works
configure:3117: ./a.out
configure:3120: $? = 0
configure:3137: result: yes
configure:3144: checking whether we are cross compiling
configure:3146: result: no
configure:3149: checking for suffix of executables
configure:3151: gcc -o conftest -fPIC conftest.c >&5
configure:3154: $? = 0
configure:3179: result:
configure:3185: checking for suffix of object files
configure:3206: gcc -c -fPIC conftest.c >&5
configure:3209: $? = 0
configure:3231: result: o
configure:3235: checking whether we are using the GNU C compiler
configure:3259: gcc -c -fPIC conftest.c >&5
configure:3265: $? = 0
configure:3269: test -z
|| test ! -s conftest.err
configure:3272: $? = 0
configure:3275: test -s conftest.o
configure:3278: $? = 0
configure:3291: result: yes
configure:3297: checking whether gcc accepts -g
configure:3318: gcc -c -g conftest.c >&5
configure:3324: $? = 0
configure:3328: test -z
|| test ! -s conftest.err
configure:3331: $? = 0
configure:3334: test -s conftest.o
configure:3337: $? = 0
configure:3348: result: yes
configure:3365: checking for gcc option to accept ANSI C
configure:3435: gcc -c -fPIC conftest.c >&5
configure:3441: $? = 0
configure:3445: test -z
|| test ! -s conftest.err
configure:3448: $? = 0
configure:3451: test -s conftest.o
configure:3454: $? = 0
configure:3472: result: none needed
configure:3490: gcc -c -fPIC conftest.c >&5
conftest.c:2: error: parse error before "me"
configure:3496: $? = 1
configure: failed program was:
| #ifndef __cplusplus
| choke me
| #endif
configure:3640: checking for style of include used by make
configure:3668: result: GNU
configure:3696: checking dependency style of gcc
configure:3786: result: gcc3
configure:3809: checking how to run the C preprocessor
configure:3844: gcc -E conftest.c
configure:3850: $? = 0
configure:3882: gcc -E conftest.c
conftest.c:19:28: ac_nonexistent.h: No such file or directory
configure:3888: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define LAM_MAJOR_VERSION 7
| #define LAM_MINOR_VERSION 1
| #define LAM_RELEASE_VERSION 4
| #define LAM_ALPHA_VERSION 0
| #define LAM_BETA_VERSION 0
| #define LAM_SVN_VERSION 0
| #define LAM_VERSION "7.1.4"
| #define LAM_DEPENDENCY_PREFIX "/import/home/u1/uaf/ogorman/lam"
| #define LAM_ARCH "x86_64-unknown-linux-gnu"
| #define LAM_WANT_DEBUG 0
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:3927: result: gcc -E
configure:3951: gcc -E conftest.c
configure:3957: $? = 0
configure:3989: gcc -E conftest.c
conftest.c:19:28: ac_nonexistent.h: No such file or directory
configure:3995: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define LAM_MAJOR_VERSION 7
| #define LAM_MINOR_VERSION 1
| #define LAM_RELEASE_VERSION 4
| #define LAM_ALPHA_VERSION 0
| #define LAM_BETA_VERSION 0
| #define LAM_SVN_VERSION 0
| #define LAM_VERSION "7.1.4"
| #define LAM_DEPENDENCY_PREFIX "/import/home/u1/uaf/ogorman/lam"
| #define LAM_ARCH "x86_64-unknown-linux-gnu"
| #define LAM_WANT_DEBUG 0
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:4039: checking for egrep
configure:4049: result: grep -E
configure:4055: checking whether gcc needs -traditional
configure:4097: result: no
configure:4115: checking for AIX
configure:4137: result: no
configure:4147: checking if need special C compiler/linker flags
configure:4180: result: none needed
configure:4392: checking for C optimization flags
configure:4394: result: -O3 -fPIC
configure:4402: checking whether the C compiler (gcc -O3 -fPIC) accepts ANSI prototypes
configure:4415: result: yes
configure:4550: checking for type int2
configure:4568: $CPP $CPPFLAGS conftest.c
configure:4578: $? = 0
configure:4587: ...some ugly egrepping...
configure:4597: $? = 1
configure:4616: result: no
configure:4625: checking for type uint2
configure:4643: $CPP $CPPFLAGS conftest.c
configure:4653: $? = 0
configure:4662: ...some ugly egrepping...
configure:4672: $? = 1
configure:4691: result: no
configure:4700: checking for type int4
configure:4718: $CPP $CPPFLAGS conftest.c
configure:4728: $? = 0
configure:4737: ...some ugly egrepping...
configure:4747: $? = 1
configure:4766: result: no
configure:4775: checking for type uint4
configure:4793: $CPP $CPPFLAGS conftest.c
configure:4803: $? = 0
configure:4812: ...some ugly egrepping...
configure:4822: $? = 1
configure:4841: result: no
configure:4850: checking for type int8
configure:4868: $CPP $CPPFLAGS conftest.c
configure:4878: $? = 0
configure:4887: ...some ugly egrepping...
configure:4897: $? = 1
configure:4916: result: no
configure:4925: checking for type uint8
configure:4943: $CPP $CPPFLAGS conftest.c
configure:4953: $? = 0
configure:4962: ...some ugly egrepping...
configure:4972: $? = 1
configure:4991: result: no
configure:5000: checking for type float4
configure:5018: $CPP $CPPFLAGS conftest.c
configure:5028: $? = 0
configure:5037: ...some ugly egrepping...
configure:5047: $? = 1
configure:5066: result: no
configure:5075: checking for type float8
configure:5093: $CPP $CPPFLAGS conftest.c
configure:5103: $? = 0
configure:5112: ...some ugly egrepping...
configure:5122: $? = 1
configure:5141: result: no
configure:5156: checking size of char
configure:5179: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:5182: $? = 0
configure:5184: ./conftest
configure:5187: $? = 0
configure:5201: result: 1
configure:5229: checking size of short
configure:5252: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:5255: $? = 0
configure:5257: ./conftest
configure:5260: $? = 0
configure:5274: result: 2
configure:5302: checking size of wchar_t
configure:5325: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:5328: $? = 0
configure:5330: ./conftest
configure:5333: $? = 0
configure:5347: result: 4
configure:5375: checking size of int
configure:5398: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:5401: $? = 0
configure:5403: ./conftest
configure:5406: $? = 0
configure:5420: result: 4
configure:5448: checking size of long
configure:5471: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:5474: $? = 0
configure:5476: ./conftest
configure:5479: $? = 0
configure:5493: result: 8
configure:5521: checking size of long long
configure:5544: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:5547: $? = 0
configure:5549: ./conftest
configure:5552: $? = 0
configure:5566: result: 8
configure:5594: checking size of float
configure:5617: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:5620: $? = 0
configure:5622: ./conftest
configure:5625: $? = 0
configure:5639: result: 4
configure:5667: checking size of double
configure:5690: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:5693: $? = 0
configure:5695: ./conftest
configure:5698: $? = 0
configure:5712: result: 8
configure:5740: checking size of long double
configure:5763: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:5766: $? = 0
configure:5768: ./conftest
configure:5771: $? = 0
configure:5785: result: 16
configure:5813: checking size of void *
configure:5836: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:5839: $? = 0
configure:5841: ./conftest
configure:5844: $? = 0
configure:5858: result: 8
configure:5892: checking alignment of char
configure:5921: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:5924: $? = 0
configure:5926: ./conftest
configure:5929: $? = 0
configure:5953: result: 1
configure:5969: checking alignment of short
configure:5998: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:6001: $? = 0
configure:6003: ./conftest
configure:6006: $? = 0
configure:6030: result: 2
configure:6046: checking alignment of wchar_t
configure:6075: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:6078: $? = 0
configure:6080: ./conftest
configure:6083: $? = 0
configure:6107: result: 4
configure:6123: checking alignment of int
configure:6152: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:6155: $? = 0
configure:6157: ./conftest
configure:6160: $? = 0
configure:6184: result: 4
configure:6200: checking alignment of long
configure:6229: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:6232: $? = 0
configure:6234: ./conftest
configure:6237: $? = 0
configure:6261: result: 8
configure:6277: checking alignment of long long
configure:6306: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:6309: $? = 0
configure:6311: ./conftest
configure:6314: $? = 0
configure:6338: result: 8
configure:6354: checking alignment of float
configure:6383: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:6386: $? = 0
configure:6388: ./conftest
configure:6391: $? = 0
configure:6415: result: 4
configure:6431: checking alignment of double
configure:6460: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:6463: $? = 0
configure:6465: ./conftest
configure:6468: $? = 0
configure:6492: result: 8
configure:6508: checking alignment of long double
configure:6537: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:6540: $? = 0
configure:6542: ./conftest
configure:6545: $? = 0
configure:6569: result: 16
configure:6585: checking alignment of void *
configure:6614: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:6617: $? = 0
configure:6619: ./conftest
configure:6622: $? = 0
configure:6646: result: 8
configure:6792: checking for g++
configure:6808: found /usr/bin/g++
configure:6818: result: g++
configure:6834: checking for C++ compiler version
configure:6837: g++ --version </dev/null >&5
g++ (GCC) 3.3.3 (SuSE Linux)
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:6840: $? = 0
configure:6842: g++ -v </dev/null >&5
Reading specs from /usr/lib64/gcc-lib/x86_64-suse-linux/3.3.3/specs
Configured with: ../configure --enable-threads=posix --prefix=/usr --with-local-prefix=/usr/local --infodir=/usr/share/info --mandir=/usr/share/man --enable-languages=c,c++,f77,objc,java,ada --disable-checking --libdir=/usr/lib64 --enable-libgcj --with-gxx-include-dir=/usr/include/g++ --with-slibdir=/lib64 --with-system-zlib --enable-shared --enable-__cxa_atexit x86_64-suse-linux
Thread model: posix
gcc version 3.3.3 (SuSE Linux)
configure:6845: $? = 0
configure:6847: g++ -V </dev/null >&5
g++: `-V' option must have argument
configure:6850: $? = 1
configure:6853: checking whether we are using the GNU C++ compiler
configure:6877: g++ -c -DLAM_BUILDING=1 conftest.cc >&5
configure:6883: $? = 0
configure:6887: test -z
|| test ! -s conftest.err
configure:6890: $? = 0
configure:6893: test -s conftest.o
configure:6896: $? = 0
configure:6909: result: yes
configure:6915: checking whether g++ accepts -g
configure:6936: g++ -c -g -DLAM_BUILDING=1 conftest.cc >&5
configure:6942: $? = 0
configure:6946: test -z
|| test ! -s conftest.err
configure:6949: $? = 0
configure:6952: test -s conftest.o
configure:6955: $? = 0
configure:6966: result: yes
configure:7008: g++ -c -g -O2 -DLAM_BUILDING=1 conftest.cc >&5
configure:7014: $? = 0
configure:7018: test -z
|| test ! -s conftest.err
configure:7021: $? = 0
configure:7024: test -s conftest.o
configure:7027: $? = 0
configure:7053: g++ -c -g -O2 -DLAM_BUILDING=1 conftest.cc >&5
conftest.cc: In function `int main()':
conftest.cc:53: error: `exit' undeclared (first use this function)
conftest.cc:53: error: (Each undeclared identifier is reported only once for
each function it appears in.)
configure:7059: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define LAM_MAJOR_VERSION 7
| #define LAM_MINOR_VERSION 1
| #define LAM_RELEASE_VERSION 4
| #define LAM_ALPHA_VERSION 0
| #define LAM_BETA_VERSION 0
| #define LAM_SVN_VERSION 0
| #define LAM_VERSION "7.1.4"
| #define LAM_DEPENDENCY_PREFIX "/import/home/u1/uaf/ogorman/lam"
| #define LAM_ARCH "x86_64-unknown-linux-gnu"
| #define LAM_WANT_DEBUG 0
| #define LAM_CC "gcc"
| #define LAM_CONFIG_FORCE_PROTOS 1
| #define LAM_HAVE_int2 0
| #define LAM_HAVE_uint2 0
| #define LAM_HAVE_int4 0
| #define LAM_HAVE_uint4 0
| #define LAM_HAVE_int8 0
| #define LAM_HAVE_uint8 0
| #define LAM_HAVE_float4 0
| #define LAM_HAVE_float8 0
| #define LAM_SIZEOF_CHAR 1
| #define LAM_SIZEOF_SHORT 2
| #define LAM_SIZEOF_WCHAR 4
| #define LAM_SIZEOF_INT 4
| #define LAM_SIZEOF_LONG 8
| #define LAM_SIZEOF_LONG_LONG 8
| #define LAM_SIZEOF_FLOAT 4
| #define LAM_SIZEOF_DOUBLE 8
| #define LAM_SIZEOF_LONG_DOUBLE 16
| #define LAM_SIZEOF_VOID_P 8
| #define LAM_ALIGNMENT_CHAR 1
| #define LAM_ALIGNMENT_SHORT 2
| #define LAM_ALIGNMENT_WCHAR 4
| #define LAM_ALIGNMENT_INT 4
| #define LAM_ALIGNMENT_LONG 8
| #define LAM_ALIGNMENT_LONG_LONG 8
| #define LAM_ALIGNMENT_FLOAT 4
| #define LAM_ALIGNMENT_DOUBLE 8
| #define LAM_ALIGNMENT_LONG_DOUBLE 16
| #define LAM_ALIGNMENT_VOID_P 8
| /* end confdefs.h. */
|
| int
| main ()
| {
| exit (42);
| ;
| return 0;
| }
configure:7008: g++ -c -g -O2 -DLAM_BUILDING=1 conftest.cc >&5
configure:7014: $? = 0
configure:7018: test -z
|| test ! -s conftest.err
configure:7021: $? = 0
configure:7024: test -s conftest.o
configure:7027: $? = 0
configure:7053: g++ -c -g -O2 -DLAM_BUILDING=1 conftest.cc >&5
configure:7059: $? = 0
configure:7063: test -z
|| test ! -s conftest.err
configure:7066: $? = 0
configure:7069: test -s conftest.o
configure:7072: $? = 0
configure:7097: checking dependency style of g++
configure:7187: result: gcc3
configure:7209: checking how to run the C++ preprocessor
configure:7240: g++ -E -DLAM_BUILDING=1 conftest.cc
configure:7246: $? = 0
configure:7278: g++ -E -DLAM_BUILDING=1 conftest.cc
conftest.cc:52:28: ac_nonexistent.h: No such file or directory
configure:7284: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define LAM_MAJOR_VERSION 7
| #define LAM_MINOR_VERSION 1
| #define LAM_RELEASE_VERSION 4
| #define LAM_ALPHA_VERSION 0
| #define LAM_BETA_VERSION 0
| #define LAM_SVN_VERSION 0
| #define LAM_VERSION "7.1.4"
| #define LAM_DEPENDENCY_PREFIX "/import/home/u1/uaf/ogorman/lam"
| #define LAM_ARCH "x86_64-unknown-linux-gnu"
| #define LAM_WANT_DEBUG 0
| #define LAM_CC "gcc"
| #define LAM_CONFIG_FORCE_PROTOS 1
| #define LAM_HAVE_int2 0
| #define LAM_HAVE_uint2 0
| #define LAM_HAVE_int4 0
| #define LAM_HAVE_uint4 0
| #define LAM_HAVE_int8 0
| #define LAM_HAVE_uint8 0
| #define LAM_HAVE_float4 0
| #define LAM_HAVE_float8 0
| #define LAM_SIZEOF_CHAR 1
| #define LAM_SIZEOF_SHORT 2
| #define LAM_SIZEOF_WCHAR 4
| #define LAM_SIZEOF_INT 4
| #define LAM_SIZEOF_LONG 8
| #define LAM_SIZEOF_LONG_LONG 8
| #define LAM_SIZEOF_FLOAT 4
| #define LAM_SIZEOF_DOUBLE 8
| #define LAM_SIZEOF_LONG_DOUBLE 16
| #define LAM_SIZEOF_VOID_P 8
| #define LAM_ALIGNMENT_CHAR 1
| #define LAM_ALIGNMENT_SHORT 2
| #define LAM_ALIGNMENT_WCHAR 4
| #define LAM_ALIGNMENT_INT 4
| #define LAM_ALIGNMENT_LONG 8
| #define LAM_ALIGNMENT_LONG_LONG 8
| #define LAM_ALIGNMENT_FLOAT 4
| #define LAM_ALIGNMENT_DOUBLE 8
| #define LAM_ALIGNMENT_LONG_DOUBLE 16
| #define LAM_ALIGNMENT_VOID_P 8
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:7323: result: g++ -E
configure:7347: g++ -E -DLAM_BUILDING=1 conftest.cc
configure:7353: $? = 0
configure:7385: g++ -E -DLAM_BUILDING=1 conftest.cc
conftest.cc:52:28: ac_nonexistent.h: No such file or directory
configure:7391: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define LAM_MAJOR_VERSION 7
| #define LAM_MINOR_VERSION 1
| #define LAM_RELEASE_VERSION 4
| #define LAM_ALPHA_VERSION 0
| #define LAM_BETA_VERSION 0
| #define LAM_SVN_VERSION 0
| #define LAM_VERSION "7.1.4"
| #define LAM_DEPENDENCY_PREFIX "/import/home/u1/uaf/ogorman/lam"
| #define LAM_ARCH "x86_64-unknown-linux-gnu"
| #define LAM_WANT_DEBUG 0
| #define LAM_CC "gcc"
| #define LAM_CONFIG_FORCE_PROTOS 1
| #define LAM_HAVE_int2 0
| #define LAM_HAVE_uint2 0
| #define LAM_HAVE_int4 0
| #define LAM_HAVE_uint4 0
| #define LAM_HAVE_int8 0
| #define LAM_HAVE_uint8 0
| #define LAM_HAVE_float4 0
| #define LAM_HAVE_float8 0
| #define LAM_SIZEOF_CHAR 1
| #define LAM_SIZEOF_SHORT 2
| #define LAM_SIZEOF_WCHAR 4
| #define LAM_SIZEOF_INT 4
| #define LAM_SIZEOF_LONG 8
| #define LAM_SIZEOF_LONG_LONG 8
| #define LAM_SIZEOF_FLOAT 4
| #define LAM_SIZEOF_DOUBLE 8
| #define LAM_SIZEOF_LONG_DOUBLE 16
| #define LAM_SIZEOF_VOID_P 8
| #define LAM_ALIGNMENT_CHAR 1
| #define LAM_ALIGNMENT_SHORT 2
| #define LAM_ALIGNMENT_WCHAR 4
| #define LAM_ALIGNMENT_INT 4
| #define LAM_ALIGNMENT_LONG 8
| #define LAM_ALIGNMENT_LONG_LONG 8
| #define LAM_ALIGNMENT_FLOAT 4
| #define LAM_ALIGNMENT_DOUBLE 8
| #define LAM_ALIGNMENT_LONG_DOUBLE 16
| #define LAM_ALIGNMENT_VOID_P 8
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:7601: checking if want C++ exception handling
configure:7603: result: no
configure:7891: checking whether g++ has new(std::nothrow)
configure:7904: g++ conftest.cc -o conftest
configure:7909: result: yes
configure:7961: checking for C++ template repository directory
configure:8020: g++ -c conftest1.C
configure:8031: g++ -c conftest2.C
configure:8082: result: not used
configure:8107: checking for C++ compiler template parameters
configure:8115: result: none needed
configure:8206: checking for C++ optimization flags
configure:8208: result: -O3
configure:8242: checking for ANSI C header files
configure:8267: g++ -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8273: $? = 0
configure:8277: test -z
|| test ! -s conftest.err
configure:8280: $? = 0
configure:8283: test -s conftest.o
configure:8286: $? = 0
configure:8372: g++ -o conftest -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8375: $? = 0
configure:8377: ./conftest
configure:8380: $? = 0
configure:8395: result: yes
configure:8419: checking for sys/types.h
configure:8435: g++ -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8441: $? = 0
configure:8445: test -z
|| test ! -s conftest.err
configure:8448: $? = 0
configure:8451: test -s conftest.o
configure:8454: $? = 0
configure:8465: result: yes
configure:8419: checking for sys/stat.h
configure:8435: g++ -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8441: $? = 0
configure:8445: test -z
|| test ! -s conftest.err
configure:8448: $? = 0
configure:8451: test -s conftest.o
configure:8454: $? = 0
configure:8465: result: yes
configure:8419: checking for stdlib.h
configure:8435: g++ -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8441: $? = 0
configure:8445: test -z
|| test ! -s conftest.err
configure:8448: $? = 0
configure:8451: test -s conftest.o
configure:8454: $? = 0
configure:8465: result: yes
configure:8419: checking for string.h
configure:8435: g++ -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8441: $? = 0
configure:8445: test -z
|| test ! -s conftest.err
configure:8448: $? = 0
configure:8451: test -s conftest.o
configure:8454: $? = 0
configure:8465: result: yes
configure:8419: checking for memory.h
configure:8435: g++ -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8441: $? = 0
configure:8445: test -z
|| test ! -s conftest.err
configure:8448: $? = 0
configure:8451: test -s conftest.o
configure:8454: $? = 0
configure:8465: result: yes
configure:8419: checking for strings.h
configure:8435: g++ -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8441: $? = 0
configure:8445: test -z
|| test ! -s conftest.err
configure:8448: $? = 0
configure:8451: test -s conftest.o
configure:8454: $? = 0
configure:8465: result: yes
configure:8419: checking for inttypes.h
configure:8435: g++ -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8441: $? = 0
configure:8445: test -z
|| test ! -s conftest.err
configure:8448: $? = 0
configure:8451: test -s conftest.o
configure:8454: $? = 0
configure:8465: result: yes
configure:8419: checking for stdint.h
configure:8435: g++ -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8441: $? = 0
configure:8445: test -z
|| test ! -s conftest.err
configure:8448: $? = 0
configure:8451: test -s conftest.o
configure:8454: $? = 0
configure:8465: result: yes
configure:8419: checking for unistd.h
configure:8435: g++ -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8441: $? = 0
configure:8445: test -z
|| test ! -s conftest.err
configure:8448: $? = 0
configure:8451: test -s conftest.o
configure:8454: $? = 0
configure:8465: result: yes
configure:8487: checking map usability
configure:8499: g++ -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8505: $? = 0
configure:8509: test -z
|| test ! -s conftest.err
configure:8512: $? = 0
configure:8515: test -s conftest.o
configure:8518: $? = 0
configure:8528: result: yes
configure:8532: checking map presence
configure:8542: g++ -E -DLAM_BUILDING=1 conftest.cc
configure:8548: $? = 0
configure:8568: result: yes
configure:8603: checking for map
configure:8610: result: yes
configure:8673: checking for type bool
configure:8689: g++ -O3 conftest.cc -o conftest
configure:8690: result: yes
configure:8747: checking for true/false
configure:8765: g++ -O3 conftest.cc -o conftest
configure:8766: result: yes
configure:8817: checking size of bool
configure:8840: g++ -o conftest -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8843: $? = 0
configure:8845: ./conftest
configure:8848: $? = 0
configure:8862: result: 1
configure:8905: checking size of int
configure:8928: g++ -o conftest -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:8931: $? = 0
configure:8933: ./conftest
configure:8936: $? = 0
configure:8950: result: 4
configure:8997: checking alignment of bool
configure:9026: g++ -o conftest -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:9029: $? = 0
configure:9031: ./conftest
configure:9034: $? = 0
configure:9058: result: 1
configure:9089: checking alignment of int
configure:9118: g++ -o conftest -O3 -DLAM_BUILDING=1 conftest.cc >&5
configure:9121: $? = 0
configure:9123: ./conftest
configure:9126: $? = 0
configure:9150: result: 4
configure:9174: checking how to store bool in C
configure:9194: result: unsigned char
configure:9315: checking for g77
configure:9331: found /usr/bin/g77
configure:9341: result: g77
configure:9422: checking how to add a library directory to g77
configure:9427: result: "-L"
configure:9438: checking g77 external naming convention
configure:9454: result: FORTRANDOUBLEUNDERSCORE
configure:9568: checking for FORTRAN optimization flags
configure:9570: result: -O
configure:9582: checking size of FORTRAN INTEGER
configure:9661: gcc -O3 -fPIC -I. -c conftest.c
configure:9668: $? = 0
configure:9678: g77 -O conftestf.f conftest.o -o conftest
configure:9685: $? = 0
configure:9695: ./conftest
configure:9702: $? = 0
configure:9721: result: 4
configure:9786: checking size of FORTRAN REAL
configure:9865: gcc -O3 -fPIC -I. -c conftest.c
configure:9872: $? = 0
configure:9882: g77 -O conftestf.f conftest.o -o conftest
configure:9889: $? = 0
configure:9899: ./conftest
configure:9906: $? = 0
configure:9925: result: 4
configure:9990: checking size of FORTRAN DOUBLE PRECISION
configure:10069: gcc -O3 -fPIC -I. -c conftest.c
configure:10076: $? = 0
configure:10086: g77 -O conftestf.f conftest.o -o conftest
configure:10093: $? = 0
configure:10103: ./conftest
configure:10110: $? = 0
configure:10129: result: 8
configure:10194: checking size of FORTRAN COMPLEX
configure:10273: gcc -O3 -fPIC -I. -c conftest.c
configure:10280: $? = 0
configure:10290: g77 -O conftestf.f conftest.o -o conftest
configure:10297: $? = 0
configure:10307: ./conftest
configure:10314: $? = 0
configure:10333: result: 8
configure:10398: checking size of FORTRAN DOUBLE COMPLEX
configure:10477: gcc -O3 -fPIC -I. -c conftest.c
configure:10484: $? = 0
configure:10494: g77 -O conftestf.f conftest.o -o conftest
configure:10501: $? = 0
configure:10511: ./conftest
configure:10518: $? = 0
configure:10537: result: 16
configure:10608: checking alignment of FORTRAN INTEGER
configure:10693: gcc -O3 -fPIC -I. -c conftest.c
configure:10700: $? = 0
configure:10710: g77 -O conftestf.f conftest.o -o conftest
conftestf.f: In program `falign':
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 3 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 3 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Initial padding for common block `foo' is 3 bytes at (^) -- consider reordering members, largest-type-size first
configure:10717: $? = 0
configure:10727: ./conftest
configure:10734: $? = 0
configure:10753: result: 4
configure:10818: checking alignment of FORTRAN REAL
configure:10903: gcc -O3 -fPIC -I. -c conftest.c
configure:10910: $? = 0
configure:10920: g77 -O conftestf.f conftest.o -o conftest
conftestf.f: In program `falign':
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 3 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 3 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Initial padding for common block `foo' is 3 bytes at (^) -- consider reordering members, largest-type-size first
configure:10927: $? = 0
configure:10937: ./conftest
configure:10944: $? = 0
configure:10963: result: 4
configure:11028: checking alignment of FORTRAN DOUBLE PRECISION
configure:11113: gcc -O3 -fPIC -I. -c conftest.c
configure:11120: $? = 0
configure:11130: g77 -O conftestf.f conftest.o -o conftest
conftestf.f: In program `falign':
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 7 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 7 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Initial padding for common block `foo' is 7 bytes at (^) -- consider reordering members, largest-type-size first
configure:11137: $? = 0
configure:11147: ./conftest
configure:11154: $? = 0
configure:11173: result: 8
configure:11238: checking alignment of FORTRAN COMPLEX
configure:11323: gcc -O3 -fPIC -I. -c conftest.c
configure:11330: $? = 0
configure:11340: g77 -O conftestf.f conftest.o -o conftest
conftestf.f: In program `falign':
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 3 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 3 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Initial padding for common block `foo' is 3 bytes at (^) -- consider reordering members, largest-type-size first
configure:11347: $? = 0
configure:11357: ./conftest
configure:11364: $? = 0
configure:11383: result: 4
configure:11448: checking alignment of FORTRAN DOUBLE COMPLEX
configure:11533: gcc -O3 -fPIC -I. -c conftest.c
configure:11540: $? = 0
configure:11550: g77 -O conftestf.f conftest.o -o conftest
conftestf.f: In program `falign':
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 7 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 7 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Initial padding for common block `foo' is 7 bytes at (^) -- consider reordering members, largest-type-size first
configure:11557: $? = 0
configure:11567: ./conftest
configure:11574: $? = 0
configure:11593: result: 8
configure:11672: checking size of FORTRAN INTEGER*1
configure:11733: gcc -O3 -fPIC -I. -c conftest.c
configure:11740: $? = 0
configure:11750: g77 -O conftestf.f conftest.o -o conftest
configure:11757: $? = 0
configure:11767: ./conftest
configure:11774: $? = 0
configure:11793: result: 1
configure:11858: checking for corresponding C type for INTEGER*1
configure:11879: result: char
configure:11905: checking size of FORTRAN INTEGER*2
configure:11966: gcc -O3 -fPIC -I. -c conftest.c
configure:11973: $? = 0
configure:11983: g77 -O conftestf.f conftest.o -o conftest
configure:11990: $? = 0
configure:12000: ./conftest
configure:12007: $? = 0
configure:12026: result: 2
configure:12091: checking for corresponding C type for INTEGER*2
configure:12112: result: short
configure:12138: checking size of FORTRAN INTEGER*4
configure:12199: gcc -O3 -fPIC -I. -c conftest.c
configure:12206: $? = 0
configure:12216: g77 -O conftestf.f conftest.o -o conftest
configure:12223: $? = 0
configure:12233: ./conftest
configure:12240: $? = 0
configure:12259: result: 4
configure:12324: checking for corresponding C type for INTEGER*4
configure:12345: result: int
configure:12371: checking size of FORTRAN INTEGER*8
configure:12432: gcc -O3 -fPIC -I. -c conftest.c
configure:12439: $? = 0
configure:12449: g77 -O conftestf.f conftest.o -o conftest
configure:12456: $? = 0
configure:12466: ./conftest
configure:12473: $? = 0
configure:12492: result: 8
configure:12557: checking for corresponding C type for INTEGER*8
configure:12578: result: long
configure:12604: checking size of FORTRAN REAL*4
configure:12665: gcc -O3 -fPIC -I. -c conftest.c
configure:12672: $? = 0
configure:12682: g77 -O conftestf.f conftest.o -o conftest
configure:12689: $? = 0
configure:12699: ./conftest
configure:12706: $? = 0
configure:12725: result: 4
configure:12790: checking for corresponding C type for REAL*4
configure:12811: result: float
configure:12837: checking size of FORTRAN REAL*8
configure:12898: gcc -O3 -fPIC -I. -c conftest.c
configure:12905: $? = 0
configure:12915: g77 -O conftestf.f conftest.o -o conftest
configure:12922: $? = 0
configure:12932: ./conftest
configure:12939: $? = 0
configure:12958: result: 8
configure:13023: checking for corresponding C type for REAL*8
configure:13044: result: double
configure:13070: checking size of FORTRAN REAL*16
configure:13131: gcc -O3 -fPIC -I. -c conftest.c
configure:13138: $? = 0
configure:13148: g77 -O conftestf.f conftest.o -o conftest
conftestf.f: In program `fsize':
conftestf.f:3:
REAL*16 x(2)
1 2
Invalid kind at (2) for type at (1) -- unsupported or not permitted
configure:13155: $? = 1
configure:13197: result: unknown
configure:13207: here is the C program:
#include <stdio.h>
#include <stdlib.h>
#ifdef __cplusplus
extern "C" {
#endif
void size_(char *a, char *b)
{
int diff = (int) (b - a);
FILE *f=fopen("conftestval", "w");
if (!f) exit(1);
fprintf(f, "%d\n", diff);
}
#ifdef __cplusplus
}
#endif
configure:13235: here is the fortran program:
program fsize
external SIZE
REAL*16 x(2)
call SIZE(x(1),x(2))
end
configure:13242: WARNING: Looks like REAL*16 is not supported by the fortran compiler
configure:13300: checking alignment of FORTRAN INTEGER*1
configure:13385: gcc -O3 -fPIC -I. -c conftest.c
configure:13392: $? = 0
configure:13402: g77 -O conftestf.f conftest.o -o conftest
configure:13409: $? = 0
configure:13419: ./conftest
configure:13426: $? = 0
configure:13445: result: 1
configure:13504: checking alignment of FORTRAN INTEGER*2
configure:13589: gcc -O3 -fPIC -I. -c conftest.c
configure:13596: $? = 0
configure:13606: g77 -O conftestf.f conftest.o -o conftest
conftestf.f: In program `falign':
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 1 byte required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 1 byte required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Initial padding for common block `foo' is 1 byte at (^) -- consider reordering members, largest-type-size first
configure:13613: $? = 0
configure:13623: ./conftest
configure:13630: $? = 0
configure:13649: result: 2
configure:13708: checking alignment of FORTRAN INTEGER*4
configure:13793: gcc -O3 -fPIC -I. -c conftest.c
configure:13800: $? = 0
configure:13810: g77 -O conftestf.f conftest.o -o conftest
conftestf.f: In program `falign':
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 3 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 3 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Initial padding for common block `foo' is 3 bytes at (^) -- consider reordering members, largest-type-size first
configure:13817: $? = 0
configure:13827: ./conftest
configure:13834: $? = 0
configure:13853: result: 4
configure:13912: checking alignment of FORTRAN INTEGER*8
configure:13997: gcc -O3 -fPIC -I. -c conftest.c
configure:14004: $? = 0
configure:14014: g77 -O conftestf.f conftest.o -o conftest
conftestf.f: In program `falign':
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 7 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 7 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Initial padding for common block `foo' is 7 bytes at (^) -- consider reordering members, largest-type-size first
configure:14021: $? = 0
configure:14031: ./conftest
configure:14038: $? = 0
configure:14057: result: 8
configure:14116: checking alignment of FORTRAN REAL*4
configure:14201: gcc -O3 -fPIC -I. -c conftest.c
configure:14208: $? = 0
configure:14218: g77 -O conftestf.f conftest.o -o conftest
conftestf.f: In program `falign':
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 3 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 3 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Initial padding for common block `foo' is 3 bytes at (^) -- consider reordering members, largest-type-size first
configure:14225: $? = 0
configure:14235: ./conftest
configure:14242: $? = 0
configure:14261: result: 4
configure:14320: checking alignment of FORTRAN REAL*8
configure:14405: gcc -O3 -fPIC -I. -c conftest.c
configure:14412: $? = 0
configure:14422: g77 -O conftestf.f conftest.o -o conftest
conftestf.f: In program `falign':
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 7 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 7 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Initial padding for common block `foo' is 7 bytes at (^) -- consider reordering members, largest-type-size first
configure:14429: $? = 0
configure:14439: ./conftest
configure:14446: $? = 0
configure:14465: result: 8
configure:14524: checking alignment of FORTRAN REAL*16
configure:14609: gcc -O3 -fPIC -I. -c conftest.c
configure:14616: $? = 0
configure:14626: g77 -O conftestf.f conftest.o -o conftest
conftestf.f: In program `falign':
conftestf.f:3:
REAL*16 w,x,y,z
1 2
Invalid kind at (2) for type at (1) -- unsupported or not permitted
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 3 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Padding of 3 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
conftestf.f:5: warning:
common /foo/a,w,b,x,y,c,z
^
Initial padding for common block `foo' is 3 bytes at (^) -- consider reordering members, largest-type-size first
configure:14633: $? = 1
configure:14675: result: unknown
configure:14685: here is the C program:
#include <stdio.h>
#include <stdlib.h>
#ifdef __cplusplus
extern "C" {
#endif
void align_(char *w, char *x, char *y, char *z)
{ unsigned long aw, ax, ay, az;
FILE *f=fopen("conftestval", "w");
if (!f) exit(1);
aw = (unsigned long) w;
ax = (unsigned long) x;
ay = (unsigned long) y;
az = (unsigned long) z;
if (! ((aw%16)||(ax%16)||(ay%16)||(az%16))) fprintf(f, "%d\n", 16);
else if (! ((aw%12)||(ax%12)||(ay%12)||(az%12))) fprintf(f, "%d\n", 12);
else if (! ((aw%8)||(ax%8)||(ay%8)||(az%8))) fprintf(f, "%d\n", 8);
else if (! ((aw%4)||(ax%4)||(ay%4)||(az%4))) fprintf(f, "%d\n", 4);
else if (! ((aw%2)||(ax%2)||(ay%2)||(az%2))) fprintf(f, "%d\n", 2);
else fprintf(f, "%d\n", 1);
fclose(f);
}
#ifdef __cplusplus
}
#endif
configure:14713: here is the fortran program:
program falign
external ALIGN
REAL*16 w,x,y,z
CHARACTER a,b,c
common /foo/a,w,b,x,y,c,z
call ALIGN(w,x,y,z)
end
configure:14719: WARNING: *** No alignment for REAL*16
configure:15000: checking if want profiling interface
configure:15002: result: yes
configure:15045: checking if want full installation of Trillium files
configure:15047: result: no
configure:15104: checking if want ROMIO support
configure:15106: result: yes
configure:15122: checking for main in -laio
configure:15146: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c -laio >&5
configure:15152: $? = 0
configure:15156: test -z
|| test ! -s conftest.err
configure:15159: $? = 0
configure:15162: test -s conftest
configure:15165: $? = 0
configure:15178: result: yes
configure:15196: checking for user ROMIO flags
configure:15199: result: none
configure:15267: checking if want FORTRAN support
configure:15296: result: yes
configure:15326: checking if want MPI 2 C++ support
configure:15328: result: yes
configure:15367: checking if want MPI::File C++ binding support
configure:15369: result: no
configure:15412: checking if want IMPI support
configure:15414: result: no
configure:15537: WARNING: *** Building ROMIO and shared library support is
configure:15539: WARNING: *** experimental. It should work, but has not been
configure:15541: WARNING: *** well tested by the LAM development team.
configure:15543: WARNING: *** Note that it is not possible to build ROMIO
configure:15545: WARNING: *** as a shared library, so it will still be built as
configure:15547: WARNING: *** a static library
configure:15575: checking how to yeild
configure:15592: result: yield()
configure:15607: checking for LAM user signal
configure:15626: result: SIGUSR2
configure:15638: checking if want purify clean
configure:15660: result: no
configure:15694: checking for desired boot timeout
configure:15696: result: 60 seconds
configure:15698: checking for desired lamd packet resend time
configure:15700: result: 500000 seconds
configure:15702: checking for desired lamd heartbeat time
configure:15704: result: 120 seconds
configure:15736: checking if want stub MPI functions
configure:15738: result: no
configure:15779: checking if want default promiscuous boot connections
configure:15781: result: no
configure:15811: checking whether ln -s works
configure:15815: result: yes
configure:15830: checking for cp
configure:15848: found /bin/cp
configure:15860: result: /bin/cp
configure:15875: checking for rm
configure:15893: found /bin/rm
configure:15905: result: /bin/rm
configure:15925: checking for sh
configure:15943: found /bin/sh
configure:15955: result: /bin/sh
configure:15971: checking if installed perl can support mpiexec
configure:15990: result: yes
configure:16002: checking for prototype of snprintf
configure:16027: gcc -E -O3 -fPIC conftest.c
configure:16037: $? = 0
configure:16046: ...some ugly egrepping...
configure:16056: $? = 0
configure:16065: ...some ugly egrepping...
configure:16075: $? = 0
configure:16084: result: yes
configure:16100: checking for prototype of gethostname
configure:16125: gcc -E -O3 -fPIC conftest.c
configure:16135: $? = 0
configure:16144: ...some ugly egrepping...
configure:16154: $? = 0
configure:16163: ...some ugly egrepping...
configure:16173: $? = 0
configure:16182: result: yes
configure:16221: checking stropts.h usability
configure:16233: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:16239: $? = 0
configure:16243: test -z
|| test ! -s conftest.err
configure:16246: $? = 0
configure:16249: test -s conftest.o
configure:16252: $? = 0
configure:16262: result: yes
configure:16266: checking stropts.h presence
configure:16276: gcc -E -DLAM_BUILDING=1 conftest.c
configure:16282: $? = 0
configure:16302: result: yes
configure:16337: checking for stropts.h
configure:16344: result: yes
configure:16221: checking grp.h usability
configure:16233: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:16239: $? = 0
configure:16243: test -z
|| test ! -s conftest.err
configure:16246: $? = 0
configure:16249: test -s conftest.o
configure:16252: $? = 0
configure:16262: result: yes
configure:16266: checking grp.h presence
configure:16276: gcc -E -DLAM_BUILDING=1 conftest.c
configure:16282: $? = 0
configure:16302: result: yes
configure:16337: checking for grp.h
configure:16344: result: yes
configure:16221: checking netinet/tcp.h usability
configure:16233: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:16239: $? = 0
configure:16243: test -z
|| test ! -s conftest.err
configure:16246: $? = 0
configure:16249: test -s conftest.o
configure:16252: $? = 0
configure:16262: result: yes
configure:16266: checking netinet/tcp.h presence
configure:16276: gcc -E -DLAM_BUILDING=1 conftest.c
configure:16282: $? = 0
configure:16302: result: yes
configure:16337: checking for netinet/tcp.h
configure:16344: result: yes
configure:16221: checking sys/select.h usability
configure:16233: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:16239: $? = 0
configure:16243: test -z
|| test ! -s conftest.err
configure:16246: $? = 0
configure:16249: test -s conftest.o
configure:16252: $? = 0
configure:16262: result: yes
configure:16266: checking sys/select.h presence
configure:16276: gcc -E -DLAM_BUILDING=1 conftest.c
configure:16282: $? = 0
configure:16302: result: yes
configure:16337: checking for sys/select.h
configure:16344: result: yes
configure:16221: checking sys/resource.h usability
configure:16233: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:16239: $? = 0
configure:16243: test -z
|| test ! -s conftest.err
configure:16246: $? = 0
configure:16249: test -s conftest.o
configure:16252: $? = 0
configure:16262: result: yes
configure:16266: checking sys/resource.h presence
configure:16276: gcc -E -DLAM_BUILDING=1 conftest.c
configure:16282: $? = 0
configure:16302: result: yes
configure:16337: checking for sys/resource.h
configure:16344: result: yes
configure:16371: checking rpc/types.h usability
configure:16383: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:16389: $? = 0
configure:16393: test -z
|| test ! -s conftest.err
configure:16396: $? = 0
configure:16399: test -s conftest.o
configure:16402: $? = 0
configure:16412: result: yes
configure:16416: checking rpc/types.h presence
configure:16426: gcc -E -DLAM_BUILDING=1 conftest.c
configure:16432: $? = 0
configure:16452: result: yes
configure:16487: checking for rpc/types.h
configure:16494: result: yes
configure:16511: checking for rpc/xdr.h
configure:16530: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:16536: $? = 0
configure:16540: test -z
|| test ! -s conftest.err
configure:16543: $? = 0
configure:16546: test -s conftest.o
configure:16549: $? = 0
configure:16560: result: yes
configure:16586: checking pty.h usability
configure:16598: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:16604: $? = 0
configure:16608: test -z
|| test ! -s conftest.err
configure:16611: $? = 0
configure:16614: test -s conftest.o
configure:16617: $? = 0
configure:16627: result: yes
configure:16631: checking pty.h presence
configure:16641: gcc -E -DLAM_BUILDING=1 conftest.c
configure:16647: $? = 0
configure:16667: result: yes
configure:16702: checking for pty.h
configure:16709: result: yes
configure:16586: checking util.h usability
configure:16598: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
conftest.c:173:18: util.h: No such file or directory
configure:16604: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define LAM_MAJOR_VERSION 7
| #define LAM_MINOR_VERSION 1
| #define LAM_RELEASE_VERSION 4
| #define LAM_ALPHA_VERSION 0
| #define LAM_BETA_VERSION 0
| #define LAM_SVN_VERSION 0
| #define LAM_VERSION "7.1.4"
| #define LAM_DEPENDENCY_PREFIX "/import/home/u1/uaf/ogorman/lam"
| #define LAM_ARCH "x86_64-unknown-linux-gnu"
| #define LAM_WANT_DEBUG 0
| #define LAM_CC "gcc"
| #define LAM_CONFIG_FORCE_PROTOS 1
| #define LAM_HAVE_int2 0
| #define LAM_HAVE_uint2 0
| #define LAM_HAVE_int4 0
| #define LAM_HAVE_uint4 0
| #define LAM_HAVE_int8 0
| #define LAM_HAVE_uint8 0
| #define LAM_HAVE_float4 0
| #define LAM_HAVE_float8 0
| #define LAM_SIZEOF_CHAR 1
| #define LAM_SIZEOF_SHORT 2
| #define LAM_SIZEOF_WCHAR 4
| #define LAM_SIZEOF_INT 4
| #define LAM_SIZEOF_LONG 8
| #define LAM_SIZEOF_LONG_LONG 8
| #define LAM_SIZEOF_FLOAT 4
| #define LAM_SIZEOF_DOUBLE 8
| #define LAM_SIZEOF_LONG_DOUBLE 16
| #define LAM_SIZEOF_VOID_P 8
| #define LAM_ALIGNMENT_CHAR 1
| #define LAM_ALIGNMENT_SHORT 2
| #define LAM_ALIGNMENT_WCHAR 4
| #define LAM_ALIGNMENT_INT 4
| #define LAM_ALIGNMENT_LONG 8
| #define LAM_ALIGNMENT_LONG_LONG 8
| #define LAM_ALIGNMENT_FLOAT 4
| #define LAM_ALIGNMENT_DOUBLE 8
| #define LAM_ALIGNMENT_LONG_DOUBLE 16
| #define LAM_ALIGNMENT_VOID_P 8
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| #define LAM_CXX "g++"
| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
| #define LAM_CXX_NOTHROW_NEW 1
| #define LAM_CXX_NOTHROW_NEW_ARG (std::nothrow)
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define LAM_CXX_STL 1
| #define LAM_CXX_BOOL 1
| #define LAM_CXX_TRUE_FALSE 1
| #define LAM_SIZEOF_CXX_BOOL 1
| #define LAM_SIZEOF_CXX_INT 4
| #define LAM_ALIGNMENT_CXX_BOOL 1
| #define LAM_ALIGNMENT_CXX_INT 4
| #define LAM_CXX_BOOL_TYPE unsigned char
| #define LAM_FORTRANDOUBLEUNDERSCORE 1
| #define LAM_FORTRANUNDERSCORE 0
| #define LAM_FORTRANCAPS 0
| #define LAM_FORTRANNOUNDERSCORE 0
| #define LAM_SIZEOF_FORTRAN_INT 4
| #define LAM_SIZEOF_FORTRAN_REAL 4
| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
| #define LAM_SIZEOF_FORTRAN_INTEGER1 1
| #define LAM_SIZEOF_FORTRAN_INTEGER2 2
| #define LAM_SIZEOF_FORTRAN_INTEGER4 4
| #define LAM_SIZEOF_FORTRAN_INTEGER8 8
| #define LAM_SIZEOF_FORTRAN_REAL4 4
| #define LAM_SIZEOF_FORTRAN_REAL8 8
| #define LAM_SIZEOF_FORTRAN_REAL16 0
| #define LAM_FORTRAN_C_TYPE_INTEGER1 char
| #define LAM_FORTRAN_C_TYPE_INTEGER2 short
| #define LAM_FORTRAN_C_TYPE_INTEGER4 int
| #define LAM_FORTRAN_C_TYPE_INTEGER8 long
| #define LAM_FORTRAN_C_TYPE_REAL4 float
| #define LAM_FORTRAN_C_TYPE_REAL8 double
| #define LAM_FORTRAN_C_TYPE_REAL16 float
| #define LAM_ALIGNMENT_FORTRAN_INT 4
| #define LAM_ALIGNMENT_FORTRAN_REAL 4
| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
| #define LAM_ALIGNMENT_FORTRAN_INTEGER1 1
| #define LAM_ALIGNMENT_FORTRAN_INTEGER2 2
| #define LAM_ALIGNMENT_FORTRAN_INTEGER4 4
| #define LAM_ALIGNMENT_FORTRAN_INTEGER8 8
| #define LAM_ALIGNMENT_FORTRAN_REAL4 4
| #define LAM_ALIGNMENT_FORTRAN_REAL8 8
| #define LAM_ALIGNMENT_FORTRAN_REAL16 0
| #define LAM_FLIBPATH "-L"
| #define LAM_WANT_PROFILE 1
| #define LAM_WANT_TRILLIUM_INSTALL 0
| #define HAVE_LIBAIO 1
| #define LAM_WANT_ROMIO 1
| #define LAM_WANT_FORTRAN 1
| #define LAM_F77 "g77"
| #define LAM_WANT_MPI2CPP 1
| #define LAM_WANT_CPPFILE 0
| #define LAM_WANT_IMPI 0
| #define LAM_USE_SELECT_YIELD 0
| #define LAM_SIGUSR SIGUSR2
| #define LAM_DISINFECT 0
| #define LAM_TO_BOOT 60
| #define LAM_TO_DLO_ACK 500000
| #define LAM_TO_DLO_IDLE 120
| #define LAM_WANT_MPI_STUBS 0
| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
| #define LAM_RM "/bin/rm -f"
| #define LAM_HAVE_PROTO_snprintf 1
| #define LAM_HAVE_PROTO_gethostname 1
| #include <sys/types.h>
| #define HAVE_STROPTS_H 1
| #define HAVE_GRP_H 1
| #define HAVE_NETINET_TCP_H 1
| #define HAVE_SYS_SELECT_H 1
| #define HAVE_SYS_RESOURCE_H 1
| #define HAVE_RPC_TYPES_H 1
| #define HAVE_RPC_XDR_H 1
| #define HAVE_PTY_H 1
| /* end confdefs.h. */
| #include <stdio.h>
| #if HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #if HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #if STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # if HAVE_STDLIB_H
| # include <stdlib.h>
| # endif
| #endif
| #if HAVE_STRING_H
| # if !STDC_HEADERS && HAVE_MEMORY_H
| # include <memory.h>
| # endif
| # include <string.h>
| #endif
| #if HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #if HAVE_INTTYPES_H
| # include <inttypes.h>
| #else
| # if HAVE_STDINT_H
| # include <stdint.h>
| # endif
| #endif
| #if HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| #include <util.h>
configure:16627: result: no
configure:16631: checking util.h presence
configure:16641: gcc -E -DLAM_BUILDING=1 conftest.c
conftest.c:139:18: util.h: No such file or directory
configure:16647: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define LAM_MAJOR_VERSION 7
| #define LAM_MINOR_VERSION 1
| #define LAM_RELEASE_VERSION 4
| #define LAM_ALPHA_VERSION 0
| #define LAM_BETA_VERSION 0
| #define LAM_SVN_VERSION 0
| #define LAM_VERSION "7.1.4"
| #define LAM_DEPENDENCY_PREFIX "/import/home/u1/uaf/ogorman/lam"
| #define LAM_ARCH "x86_64-unknown-linux-gnu"
| #define LAM_WANT_DEBUG 0
| #define LAM_CC "gcc"
| #define LAM_CONFIG_FORCE_PROTOS 1
| #define LAM_HAVE_int2 0
| #define LAM_HAVE_uint2 0
| #define LAM_HAVE_int4 0
| #define LAM_HAVE_uint4 0
| #define LAM_HAVE_int8 0
| #define LAM_HAVE_uint8 0
| #define LAM_HAVE_float4 0
| #define LAM_HAVE_float8 0
| #define LAM_SIZEOF_CHAR 1
| #define LAM_SIZEOF_SHORT 2
| #define LAM_SIZEOF_WCHAR 4
| #define LAM_SIZEOF_INT 4
| #define LAM_SIZEOF_LONG 8
| #define LAM_SIZEOF_LONG_LONG 8
| #define LAM_SIZEOF_FLOAT 4
| #define LAM_SIZEOF_DOUBLE 8
| #define LAM_SIZEOF_LONG_DOUBLE 16
| #define LAM_SIZEOF_VOID_P 8
| #define LAM_ALIGNMENT_CHAR 1
| #define LAM_ALIGNMENT_SHORT 2
| #define LAM_ALIGNMENT_WCHAR 4
| #define LAM_ALIGNMENT_INT 4
| #define LAM_ALIGNMENT_LONG 8
| #define LAM_ALIGNMENT_LONG_LONG 8
| #define LAM_ALIGNMENT_FLOAT 4
| #define LAM_ALIGNMENT_DOUBLE 8
| #define LAM_ALIGNMENT_LONG_DOUBLE 16
| #define LAM_ALIGNMENT_VOID_P 8
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| #define LAM_CXX "g++"
| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
| #define LAM_CXX_NOTHROW_NEW 1
| #define LAM_CXX_NOTHROW_NEW_ARG (std::nothrow)
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define LAM_CXX_STL 1
| #define LAM_CXX_BOOL 1
| #define LAM_CXX_TRUE_FALSE 1
| #define LAM_SIZEOF_CXX_BOOL 1
| #define LAM_SIZEOF_CXX_INT 4
| #define LAM_ALIGNMENT_CXX_BOOL 1
| #define LAM_ALIGNMENT_CXX_INT 4
| #define LAM_CXX_BOOL_TYPE unsigned char
| #define LAM_FORTRANDOUBLEUNDERSCORE 1
| #define LAM_FORTRANUNDERSCORE 0
| #define LAM_FORTRANCAPS 0
| #define LAM_FORTRANNOUNDERSCORE 0
| #define LAM_SIZEOF_FORTRAN_INT 4
| #define LAM_SIZEOF_FORTRAN_REAL 4
| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
| #define LAM_SIZEOF_FORTRAN_INTEGER1 1
| #define LAM_SIZEOF_FORTRAN_INTEGER2 2
| #define LAM_SIZEOF_FORTRAN_INTEGER4 4
| #define LAM_SIZEOF_FORTRAN_INTEGER8 8
| #define LAM_SIZEOF_FORTRAN_REAL4 4
| #define LAM_SIZEOF_FORTRAN_REAL8 8
| #define LAM_SIZEOF_FORTRAN_REAL16 0
| #define LAM_FORTRAN_C_TYPE_INTEGER1 char
| #define LAM_FORTRAN_C_TYPE_INTEGER2 short
| #define LAM_FORTRAN_C_TYPE_INTEGER4 int
| #define LAM_FORTRAN_C_TYPE_INTEGER8 long
| #define LAM_FORTRAN_C_TYPE_REAL4 float
| #define LAM_FORTRAN_C_TYPE_REAL8 double
| #define LAM_FORTRAN_C_TYPE_REAL16 float
| #define LAM_ALIGNMENT_FORTRAN_INT 4
| #define LAM_ALIGNMENT_FORTRAN_REAL 4
| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
| #define LAM_ALIGNMENT_FORTRAN_INTEGER1 1
| #define LAM_ALIGNMENT_FORTRAN_INTEGER2 2
| #define LAM_ALIGNMENT_FORTRAN_INTEGER4 4
| #define LAM_ALIGNMENT_FORTRAN_INTEGER8 8
| #define LAM_ALIGNMENT_FORTRAN_REAL4 4
| #define LAM_ALIGNMENT_FORTRAN_REAL8 8
| #define LAM_ALIGNMENT_FORTRAN_REAL16 0
| #define LAM_FLIBPATH "-L"
| #define LAM_WANT_PROFILE 1
| #define LAM_WANT_TRILLIUM_INSTALL 0
| #define HAVE_LIBAIO 1
| #define LAM_WANT_ROMIO 1
| #define LAM_WANT_FORTRAN 1
| #define LAM_F77 "g77"
| #define LAM_WANT_MPI2CPP 1
| #define LAM_WANT_CPPFILE 0
| #define LAM_WANT_IMPI 0
| #define LAM_USE_SELECT_YIELD 0
| #define LAM_SIGUSR SIGUSR2
| #define LAM_DISINFECT 0
| #define LAM_TO_BOOT 60
| #define LAM_TO_DLO_ACK 500000
| #define LAM_TO_DLO_IDLE 120
| #define LAM_WANT_MPI_STUBS 0
| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
| #define LAM_RM "/bin/rm -f"
| #define LAM_HAVE_PROTO_snprintf 1
| #define LAM_HAVE_PROTO_gethostname 1
| #include <sys/types.h>
| #define HAVE_STROPTS_H 1
| #define HAVE_GRP_H 1
| #define HAVE_NETINET_TCP_H 1
| #define HAVE_SYS_SELECT_H 1
| #define HAVE_SYS_RESOURCE_H 1
| #define HAVE_RPC_TYPES_H 1
| #define HAVE_RPC_XDR_H 1
| #define HAVE_PTY_H 1
| /* end confdefs.h. */
| #include <util.h>
configure:16667: result: no
configure:16702: checking for util.h
configure:16709: result: no
configure:16742: checking sched.h usability
configure:16754: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:16760: $? = 0
configure:16764: test -z
|| test ! -s conftest.err
configure:16767: $? = 0
configure:16770: test -s conftest.o
configure:16773: $? = 0
configure:16783: result: yes
configure:16787: checking sched.h presence
configure:16797: gcc -E -DLAM_BUILDING=1 conftest.c
configure:16803: $? = 0
configure:16823: result: yes
configure:16858: checking for sched.h
configure:16865: result: yes
configure:16733: checking for strings.h
configure:16738: result: yes
configure:16902: checking if FIONBIO defined in sys/ioctl.h
configure:16937: result: not on AIX 4.3.3, so who cares?
configure:16944: checking if SA_RESTART defined in signal.h
configure:16971: result: yes
configure:16974: checking for sa_len in struct sockaddr
configure:16993: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
conftest.c: In function `main':
conftest.c:147: error: structure has no member named `sa_len'
configure:16999: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define LAM_MAJOR_VERSION 7
| #define LAM_MINOR_VERSION 1
| #define LAM_RELEASE_VERSION 4
| #define LAM_ALPHA_VERSION 0
| #define LAM_BETA_VERSION 0
| #define LAM_SVN_VERSION 0
| #define LAM_VERSION "7.1.4"
| #define LAM_DEPENDENCY_PREFIX "/import/home/u1/uaf/ogorman/lam"
| #define LAM_ARCH "x86_64-unknown-linux-gnu"
| #define LAM_WANT_DEBUG 0
| #define LAM_CC "gcc"
| #define LAM_CONFIG_FORCE_PROTOS 1
| #define LAM_HAVE_int2 0
| #define LAM_HAVE_uint2 0
| #define LAM_HAVE_int4 0
| #define LAM_HAVE_uint4 0
| #define LAM_HAVE_int8 0
| #define LAM_HAVE_uint8 0
| #define LAM_HAVE_float4 0
| #define LAM_HAVE_float8 0
| #define LAM_SIZEOF_CHAR 1
| #define LAM_SIZEOF_SHORT 2
| #define LAM_SIZEOF_WCHAR 4
| #define LAM_SIZEOF_INT 4
| #define LAM_SIZEOF_LONG 8
| #define LAM_SIZEOF_LONG_LONG 8
| #define LAM_SIZEOF_FLOAT 4
| #define LAM_SIZEOF_DOUBLE 8
| #define LAM_SIZEOF_LONG_DOUBLE 16
| #define LAM_SIZEOF_VOID_P 8
| #define LAM_ALIGNMENT_CHAR 1
| #define LAM_ALIGNMENT_SHORT 2
| #define LAM_ALIGNMENT_WCHAR 4
| #define LAM_ALIGNMENT_INT 4
| #define LAM_ALIGNMENT_LONG 8
| #define LAM_ALIGNMENT_LONG_LONG 8
| #define LAM_ALIGNMENT_FLOAT 4
| #define LAM_ALIGNMENT_DOUBLE 8
| #define LAM_ALIGNMENT_LONG_DOUBLE 16
| #define LAM_ALIGNMENT_VOID_P 8
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| #define LAM_CXX "g++"
| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
| #define LAM_CXX_NOTHROW_NEW 1
| #define LAM_CXX_NOTHROW_NEW_ARG (std::nothrow)
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define LAM_CXX_STL 1
| #define LAM_CXX_BOOL 1
| #define LAM_CXX_TRUE_FALSE 1
| #define LAM_SIZEOF_CXX_BOOL 1
| #define LAM_SIZEOF_CXX_INT 4
| #define LAM_ALIGNMENT_CXX_BOOL 1
| #define LAM_ALIGNMENT_CXX_INT 4
| #define LAM_CXX_BOOL_TYPE unsigned char
| #define LAM_FORTRANDOUBLEUNDERSCORE 1
| #define LAM_FORTRANUNDERSCORE 0
| #define LAM_FORTRANCAPS 0
| #define LAM_FORTRANNOUNDERSCORE 0
| #define LAM_SIZEOF_FORTRAN_INT 4
| #define LAM_SIZEOF_FORTRAN_REAL 4
| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
| #define LAM_SIZEOF_FORTRAN_INTEGER1 1
| #define LAM_SIZEOF_FORTRAN_INTEGER2 2
| #define LAM_SIZEOF_FORTRAN_INTEGER4 4
| #define LAM_SIZEOF_FORTRAN_INTEGER8 8
| #define LAM_SIZEOF_FORTRAN_REAL4 4
| #define LAM_SIZEOF_FORTRAN_REAL8 8
| #define LAM_SIZEOF_FORTRAN_REAL16 0
| #define LAM_FORTRAN_C_TYPE_INTEGER1 char
| #define LAM_FORTRAN_C_TYPE_INTEGER2 short
| #define LAM_FORTRAN_C_TYPE_INTEGER4 int
| #define LAM_FORTRAN_C_TYPE_INTEGER8 long
| #define LAM_FORTRAN_C_TYPE_REAL4 float
| #define LAM_FORTRAN_C_TYPE_REAL8 double
| #define LAM_FORTRAN_C_TYPE_REAL16 float
| #define LAM_ALIGNMENT_FORTRAN_INT 4
| #define LAM_ALIGNMENT_FORTRAN_REAL 4
| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
| #define LAM_ALIGNMENT_FORTRAN_INTEGER1 1
| #define LAM_ALIGNMENT_FORTRAN_INTEGER2 2
| #define LAM_ALIGNMENT_FORTRAN_INTEGER4 4
| #define LAM_ALIGNMENT_FORTRAN_INTEGER8 8
| #define LAM_ALIGNMENT_FORTRAN_REAL4 4
| #define LAM_ALIGNMENT_FORTRAN_REAL8 8
| #define LAM_ALIGNMENT_FORTRAN_REAL16 0
| #define LAM_FLIBPATH "-L"
| #define LAM_WANT_PROFILE 1
| #define LAM_WANT_TRILLIUM_INSTALL 0
| #define HAVE_LIBAIO 1
| #define LAM_WANT_ROMIO 1
| #define LAM_WANT_FORTRAN 1
| #define LAM_F77 "g77"
| #define LAM_WANT_MPI2CPP 1
| #define LAM_WANT_CPPFILE 0
| #define LAM_WANT_IMPI 0
| #define LAM_USE_SELECT_YIELD 0
| #define LAM_SIGUSR SIGUSR2
| #define LAM_DISINFECT 0
| #define LAM_TO_BOOT 60
| #define LAM_TO_DLO_ACK 500000
| #define LAM_TO_DLO_IDLE 120
| #define LAM_WANT_MPI_STUBS 0
| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
| #define LAM_RM "/bin/rm -f"
| #define LAM_HAVE_PROTO_snprintf 1
| #define LAM_HAVE_PROTO_gethostname 1
| #define HAVE_STROPTS_H 1
| #define HAVE_GRP_H 1
| #define HAVE_NETINET_TCP_H 1
| #define HAVE_SYS_SELECT_H 1
| #define HAVE_SYS_RESOURCE_H 1
| #define HAVE_RPC_TYPES_H 1
| #define HAVE_RPC_XDR_H 1
| #define HAVE_PTY_H 1
| #define HAVE_SCHED_H 1
| #define HAVE_STRINGS_H 1
| #define LAM_HAVE_FIONBIO 0
| #define LAM_HAVE_SA_RESTART 1
| /* end confdefs.h. */
| #include <sys/types.h>
| #include <sys/socket.h>
| int
| main ()
| {
| struct sockaddr s; s.sa_len;
| ;
| return 0;
| }
configure:17027: result: no
configure:17030: checking if need to include sys/select.h
configure:17049: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:17055: $? = 0
configure:17059: test -z
|| test ! -s conftest.err
configure:17062: $? = 0
configure:17065: test -s conftest.o
configure:17068: $? = 0
configure:17083: result: yes
configure:17098: checking for socket
configure:17155: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:17161: $? = 0
configure:17165: test -z
|| test ! -s conftest.err
configure:17168: $? = 0
configure:17171: test -s conftest
configure:17174: $? = 0
configure:17186: result: yes
configure:17266: checking for gethostbyname
configure:17323: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:17329: $? = 0
configure:17333: test -z
|| test ! -s conftest.err
configure:17336: $? = 0
configure:17339: test -s conftest
configure:17342: $? = 0
configure:17354: result: yes
configure:17442: checking for login in -lutil
configure:17472: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c -lutil >&5
configure:17478: $? = 0
configure:17482: test -z
|| test ! -s conftest.err
configure:17485: $? = 0
configure:17488: test -s conftest
configure:17491: $? = 0
configure:17504: result: yes
configure:17517: checking for openpty
configure:17574: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c -lutil >&5
configure:17580: $? = 0
configure:17584: test -z
|| test ! -s conftest.err
configure:17587: $? = 0
configure:17590: test -s conftest
configure:17593: $? = 0
configure:17605: result: yes
configure:17643: checking for atexit
configure:17700: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:17706: $? = 0
configure:17710: test -z
|| test ! -s conftest.err
configure:17713: $? = 0
configure:17716: test -s conftest
configure:17719: $? = 0
configure:17731: result: yes
configure:17760: checking for getcwd
configure:17817: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:17823: $? = 0
configure:17827: test -z
|| test ! -s conftest.err
configure:17830: $? = 0
configure:17833: test -s conftest
configure:17836: $? = 0
configure:17848: result: yes
configure:17877: checking for yield
configure:17934: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
/tmp/ccAGMWlR.o(.text+0xa): In function `main':
: undefined reference to `yield'
/tmp/ccAGMWlR.o(.data.rel+0x0): undefined reference to `yield'
collect2: ld returned 1 exit status
configure:17940: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define LAM_MAJOR_VERSION 7
| #define LAM_MINOR_VERSION 1
| #define LAM_RELEASE_VERSION 4
| #define LAM_ALPHA_VERSION 0
| #define LAM_BETA_VERSION 0
| #define LAM_SVN_VERSION 0
| #define LAM_VERSION "7.1.4"
| #define LAM_DEPENDENCY_PREFIX "/import/home/u1/uaf/ogorman/lam"
| #define LAM_ARCH "x86_64-unknown-linux-gnu"
| #define LAM_WANT_DEBUG 0
| #define LAM_CC "gcc"
| #define LAM_CONFIG_FORCE_PROTOS 1
| #define LAM_HAVE_int2 0
| #define LAM_HAVE_uint2 0
| #define LAM_HAVE_int4 0
| #define LAM_HAVE_uint4 0
| #define LAM_HAVE_int8 0
| #define LAM_HAVE_uint8 0
| #define LAM_HAVE_float4 0
| #define LAM_HAVE_float8 0
| #define LAM_SIZEOF_CHAR 1
| #define LAM_SIZEOF_SHORT 2
| #define LAM_SIZEOF_WCHAR 4
| #define LAM_SIZEOF_INT 4
| #define LAM_SIZEOF_LONG 8
| #define LAM_SIZEOF_LONG_LONG 8
| #define LAM_SIZEOF_FLOAT 4
| #define LAM_SIZEOF_DOUBLE 8
| #define LAM_SIZEOF_LONG_DOUBLE 16
| #define LAM_SIZEOF_VOID_P 8
| #define LAM_ALIGNMENT_CHAR 1
| #define LAM_ALIGNMENT_SHORT 2
| #define LAM_ALIGNMENT_WCHAR 4
| #define LAM_ALIGNMENT_INT 4
| #define LAM_ALIGNMENT_LONG 8
| #define LAM_ALIGNMENT_LONG_LONG 8
| #define LAM_ALIGNMENT_FLOAT 4
| #define LAM_ALIGNMENT_DOUBLE 8
| #define LAM_ALIGNMENT_LONG_DOUBLE 16
| #define LAM_ALIGNMENT_VOID_P 8
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| #define LAM_CXX "g++"
| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
| #define LAM_CXX_NOTHROW_NEW 1
| #define LAM_CXX_NOTHROW_NEW_ARG (std::nothrow)
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define LAM_CXX_STL 1
| #define LAM_CXX_BOOL 1
| #define LAM_CXX_TRUE_FALSE 1
| #define LAM_SIZEOF_CXX_BOOL 1
| #define LAM_SIZEOF_CXX_INT 4
| #define LAM_ALIGNMENT_CXX_BOOL 1
| #define LAM_ALIGNMENT_CXX_INT 4
| #define LAM_CXX_BOOL_TYPE unsigned char
| #define LAM_FORTRANDOUBLEUNDERSCORE 1
| #define LAM_FORTRANUNDERSCORE 0
| #define LAM_FORTRANCAPS 0
| #define LAM_FORTRANNOUNDERSCORE 0
| #define LAM_SIZEOF_FORTRAN_INT 4
| #define LAM_SIZEOF_FORTRAN_REAL 4
| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
| #define LAM_SIZEOF_FORTRAN_INTEGER1 1
| #define LAM_SIZEOF_FORTRAN_INTEGER2 2
| #define LAM_SIZEOF_FORTRAN_INTEGER4 4
| #define LAM_SIZEOF_FORTRAN_INTEGER8 8
| #define LAM_SIZEOF_FORTRAN_REAL4 4
| #define LAM_SIZEOF_FORTRAN_REAL8 8
| #define LAM_SIZEOF_FORTRAN_REAL16 0
| #define LAM_FORTRAN_C_TYPE_INTEGER1 char
| #define LAM_FORTRAN_C_TYPE_INTEGER2 short
| #define LAM_FORTRAN_C_TYPE_INTEGER4 int
| #define LAM_FORTRAN_C_TYPE_INTEGER8 long
| #define LAM_FORTRAN_C_TYPE_REAL4 float
| #define LAM_FORTRAN_C_TYPE_REAL8 double
| #define LAM_FORTRAN_C_TYPE_REAL16 float
| #define LAM_ALIGNMENT_FORTRAN_INT 4
| #define LAM_ALIGNMENT_FORTRAN_REAL 4
| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
| #define LAM_ALIGNMENT_FORTRAN_INTEGER1 1
| #define LAM_ALIGNMENT_FORTRAN_INTEGER2 2
| #define LAM_ALIGNMENT_FORTRAN_INTEGER4 4
| #define LAM_ALIGNMENT_FORTRAN_INTEGER8 8
| #define LAM_ALIGNMENT_FORTRAN_REAL4 4
| #define LAM_ALIGNMENT_FORTRAN_REAL8 8
| #define LAM_ALIGNMENT_FORTRAN_REAL16 0
| #define LAM_FLIBPATH "-L"
| #define LAM_WANT_PROFILE 1
| #define LAM_WANT_TRILLIUM_INSTALL 0
| #define HAVE_LIBAIO 1
| #define LAM_WANT_ROMIO 1
| #define LAM_WANT_FORTRAN 1
| #define LAM_F77 "g77"
| #define LAM_WANT_MPI2CPP 1
| #define LAM_WANT_CPPFILE 0
| #define LAM_WANT_IMPI 0
| #define LAM_USE_SELECT_YIELD 0
| #define LAM_SIGUSR SIGUSR2
| #define LAM_DISINFECT 0
| #define LAM_TO_BOOT 60
| #define LAM_TO_DLO_ACK 500000
| #define LAM_TO_DLO_IDLE 120
| #define LAM_WANT_MPI_STUBS 0
| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
| #define LAM_RM "/bin/rm -f"
| #define LAM_HAVE_PROTO_snprintf 1
| #define LAM_HAVE_PROTO_gethostname 1
| #define HAVE_STROPTS_H 1
| #define HAVE_GRP_H 1
| #define HAVE_NETINET_TCP_H 1
| #define HAVE_SYS_SELECT_H 1
| #define HAVE_SYS_RESOURCE_H 1
| #define HAVE_RPC_TYPES_H 1
| #define HAVE_RPC_XDR_H 1
| #define HAVE_PTY_H 1
| #define HAVE_SCHED_H 1
| #define HAVE_STRINGS_H 1
| #define LAM_HAVE_FIONBIO 0
| #define LAM_HAVE_SA_RESTART 1
| #define LAM_HAVE_SA_LEN 0
| #define LAM_NEED_SYS_SELECT_H 1
| #define LAM_HAVE_OPENPTY 1
| #define LAM_HAVE_ATEXIT 1
| #define LAM_HAVE_GETCWD 1
| /* end confdefs.h. */
| /* Define yield to an innocuous variant, in case <limits.h> declares yield.
| For example, HP-UX 11i <limits.h> declares gettimeofday. */
| #define yield innocuous_yield
|
| /* System header to define __stub macros and hopefully few prototypes,
| which can conflict with char yield (); below.
| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| <limits.h> exists even on freestanding compilers. */
|
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
|
| #undef yield
|
| /* Override any gcc2 internal prototype to avoid an error. */
| #ifdef __cplusplus
| extern "C"
| {
| #endif
| /* We use char because int might match the return type of a gcc2
| builtin and then its argument prototype would still apply. */
| char yield ();
| /* The GNU C library defines this for functions which it implements
| to always fail with ENOSYS. Some functions are actually named
| something starting with __ and the normal name is an alias. */
| #if defined (__stub_yield) || defined (__stub___yield)
| choke me
| #else
| char (*f) () = yield;
| #endif
| #ifdef __cplusplus
| }
| #endif
|
| int
| main ()
| {
| return f != yield;
| ;
| return 0;
| }
configure:17965: result: no
configure:17994: checking for snprintf
configure:18051: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
conftest.c:172: warning: conflicting types for built-in function `snprintf'
configure:18057: $? = 0
configure:18061: test -z
|| test ! -s conftest.err
configure:18064: $? = 0
configure:18067: test -s conftest
configure:18070: $? = 0
configure:18082: result: yes
configure:18111: checking for atoll
configure:18168: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:18174: $? = 0
configure:18178: test -z
|| test ! -s conftest.err
configure:18181: $? = 0
configure:18184: test -s conftest
configure:18187: $? = 0
configure:18199: result: yes
configure:18228: checking for strtoll
configure:18285: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:18291: $? = 0
configure:18295: test -z
|| test ! -s conftest.err
configure:18298: $? = 0
configure:18301: test -s conftest
configure:18304: $? = 0
configure:18316: result: yes
configure:18345: checking for sched_yield
configure:18402: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:18408: $? = 0
configure:18412: test -z
|| test ! -s conftest.err
configure:18415: $? = 0
configure:18418: test -s conftest
configure:18421: $? = 0
configure:18433: result: yes
configure:18462: checking for sysconf
configure:18519: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:18525: $? = 0
configure:18529: test -z
|| test ! -s conftest.err
configure:18532: $? = 0
configure:18535: test -s conftest
configure:18538: $? = 0
configure:18550: result: yes
configure:18579: checking for sysctl
configure:18636: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:18642: $? = 0
configure:18646: test -z
|| test ! -s conftest.err
configure:18649: $? = 0
configure:18652: test -s conftest
configure:18655: $? = 0
configure:18667: result: yes
configure:18692: checking whether vscanf is declared
configure:18716: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
conftest.c: In function `main':
conftest.c:192: error: `vscanf' undeclared (first use in this function)
conftest.c:192: error: (Each undeclared identifier is reported only once
conftest.c:192: error: for each function it appears in.)
configure:18722: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define LAM_MAJOR_VERSION 7
| #define LAM_MINOR_VERSION 1
| #define LAM_RELEASE_VERSION 4
| #define LAM_ALPHA_VERSION 0
| #define LAM_BETA_VERSION 0
| #define LAM_SVN_VERSION 0
| #define LAM_VERSION "7.1.4"
| #define LAM_DEPENDENCY_PREFIX "/import/home/u1/uaf/ogorman/lam"
| #define LAM_ARCH "x86_64-unknown-linux-gnu"
| #define LAM_WANT_DEBUG 0
| #define LAM_CC "gcc"
| #define LAM_CONFIG_FORCE_PROTOS 1
| #define LAM_HAVE_int2 0
| #define LAM_HAVE_uint2 0
| #define LAM_HAVE_int4 0
| #define LAM_HAVE_uint4 0
| #define LAM_HAVE_int8 0
| #define LAM_HAVE_uint8 0
| #define LAM_HAVE_float4 0
| #define LAM_HAVE_float8 0
| #define LAM_SIZEOF_CHAR 1
| #define LAM_SIZEOF_SHORT 2
| #define LAM_SIZEOF_WCHAR 4
| #define LAM_SIZEOF_INT 4
| #define LAM_SIZEOF_LONG 8
| #define LAM_SIZEOF_LONG_LONG 8
| #define LAM_SIZEOF_FLOAT 4
| #define LAM_SIZEOF_DOUBLE 8
| #define LAM_SIZEOF_LONG_DOUBLE 16
| #define LAM_SIZEOF_VOID_P 8
| #define LAM_ALIGNMENT_CHAR 1
| #define LAM_ALIGNMENT_SHORT 2
| #define LAM_ALIGNMENT_WCHAR 4
| #define LAM_ALIGNMENT_INT 4
| #define LAM_ALIGNMENT_LONG 8
| #define LAM_ALIGNMENT_LONG_LONG 8
| #define LAM_ALIGNMENT_FLOAT 4
| #define LAM_ALIGNMENT_DOUBLE 8
| #define LAM_ALIGNMENT_LONG_DOUBLE 16
| #define LAM_ALIGNMENT_VOID_P 8
| #ifdef __cplusplus
| extern "C" void std::exit (int) throw (); using std::exit;
| #endif
| #define LAM_CXX "g++"
| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
| #define LAM_CXX_NOTHROW_NEW 1
| #define LAM_CXX_NOTHROW_NEW_ARG (std::nothrow)
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define LAM_CXX_STL 1
| #define LAM_CXX_BOOL 1
| #define LAM_CXX_TRUE_FALSE 1
| #define LAM_SIZEOF_CXX_BOOL 1
| #define LAM_SIZEOF_CXX_INT 4
| #define LAM_ALIGNMENT_CXX_BOOL 1
| #define LAM_ALIGNMENT_CXX_INT 4
| #define LAM_CXX_BOOL_TYPE unsigned char
| #define LAM_FORTRANDOUBLEUNDERSCORE 1
| #define LAM_FORTRANUNDERSCORE 0
| #define LAM_FORTRANCAPS 0
| #define LAM_FORTRANNOUNDERSCORE 0
| #define LAM_SIZEOF_FORTRAN_INT 4
| #define LAM_SIZEOF_FORTRAN_REAL 4
| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
| #define LAM_SIZEOF_FORTRAN_INTEGER1 1
| #define LAM_SIZEOF_FORTRAN_INTEGER2 2
| #define LAM_SIZEOF_FORTRAN_INTEGER4 4
| #define LAM_SIZEOF_FORTRAN_INTEGER8 8
| #define LAM_SIZEOF_FORTRAN_REAL4 4
| #define LAM_SIZEOF_FORTRAN_REAL8 8
| #define LAM_SIZEOF_FORTRAN_REAL16 0
| #define LAM_FORTRAN_C_TYPE_INTEGER1 char
| #define LAM_FORTRAN_C_TYPE_INTEGER2 short
| #define LAM_FORTRAN_C_TYPE_INTEGER4 int
| #define LAM_FORTRAN_C_TYPE_INTEGER8 long
| #define LAM_FORTRAN_C_TYPE_REAL4 float
| #define LAM_FORTRAN_C_TYPE_REAL8 double
| #define LAM_FORTRAN_C_TYPE_REAL16 float
| #define LAM_ALIGNMENT_FORTRAN_INT 4
| #define LAM_ALIGNMENT_FORTRAN_REAL 4
| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
| #define LAM_ALIGNMENT_FORTRAN_INTEGER1 1
| #define LAM_ALIGNMENT_FORTRAN_INTEGER2 2
| #define LAM_ALIGNMENT_FORTRAN_INTEGER4 4
| #define LAM_ALIGNMENT_FORTRAN_INTEGER8 8
| #define LAM_ALIGNMENT_FORTRAN_REAL4 4
| #define LAM_ALIGNMENT_FORTRAN_REAL8 8
| #define LAM_ALIGNMENT_FORTRAN_REAL16 0
| #define LAM_FLIBPATH "-L"
| #define LAM_WANT_PROFILE 1
| #define LAM_WANT_TRILLIUM_INSTALL 0
| #define HAVE_LIBAIO 1
| #define LAM_WANT_ROMIO 1
| #define LAM_WANT_FORTRAN 1
| #define LAM_F77 "g77"
| #define LAM_WANT_MPI2CPP 1
| #define LAM_WANT_CPPFILE 0
| #define LAM_WANT_IMPI 0
| #define LAM_USE_SELECT_YIELD 0
| #define LAM_SIGUSR SIGUSR2
| #define LAM_DISINFECT 0
| #define LAM_TO_BOOT 60
| #define LAM_TO_DLO_ACK 500000
| #define LAM_TO_DLO_IDLE 120
| #define LAM_WANT_MPI_STUBS 0
| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
| #define LAM_RM "/bin/rm -f"
| #define LAM_HAVE_PROTO_snprintf 1
| #define LAM_HAVE_PROTO_gethostname 1
| #define HAVE_STROPTS_H 1
| #define HAVE_GRP_H 1
| #define HAVE_NETINET_TCP_H 1
| #define HAVE_SYS_SELECT_H 1
| #define HAVE_SYS_RESOURCE_H 1
| #define HAVE_RPC_TYPES_H 1
| #define HAVE_RPC_XDR_H 1
| #define HAVE_PTY_H 1
| #define HAVE_SCHED_H 1
| #define HAVE_STRINGS_H 1
| #define LAM_HAVE_FIONBIO 0
| #define LAM_HAVE_SA_RESTART 1
| #define LAM_HAVE_SA_LEN 0
| #define LAM_NEED_SYS_SELECT_H 1
| #define LAM_HAVE_OPENPTY 1
| #define LAM_HAVE_ATEXIT 1
| #define LAM_HAVE_GETCWD 1
| #define LAM_HAVE_YIELD 0
| #define LAM_HAVE_SNPRINTF 1
| #define LAM_HAVE_ATOLL 1
| #define LAM_HAVE_STRTOLL 1
| #define LAM_HAVE_SCHED_YIELD 1
| #define LAM_HAVE_SYSCONF 1
| #define LAM_HAVE_SYSCTL 1
| /* end confdefs.h. */
| #include <stdio.h>
| #if HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #if HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #if STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # if HAVE_STDLIB_H
| # include <stdlib.h>
| # endif
| #endif
| #if HAVE_STRING_H
| # if !STDC_HEADERS && HAVE_MEMORY_H
| # include <memory.h>
| # endif
| # include <string.h>
| #endif
| #if HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #if HAVE_INTTYPES_H
| # include <inttypes.h>
| #else
| # if HAVE_STDINT_H
| # include <stdint.h>
| # endif
| #endif
| #if HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| int
| main ()
| {
| #ifndef vscanf
| char *p = (char *) vscanf;
| #endif
|
| ;
| return 0;
| }
configure:18746: result: no
configure:18762: checking whether va_copy is declared
configure:18787: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:18793: $? = 0
configure:18797: test -z
|| test ! -s conftest.err
configure:18800: $? = 0
configure:18803: test -s conftest.o
configure:18806: $? = 0
configure:18817: result: yes
configure:18831: checking whether __va_copy is declared
configure:18856: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:18862: $? = 0
configure:18866: test -z
|| test ! -s conftest.err
configure:18869: $? = 0
configure:18872: test -s conftest.o
configure:18875: $? = 0
configure:18886: result: yes
configure:18936: checking for glibc
configure:18967: gcc -o conftest -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:18970: $? = 0
configure:18972: ./conftest
configure:18975: $? = 0
configure:18988: result: yes
configure:18998: checking whether to use prefix memcpy()
configure:19041: result: yes (default on glibc systems: yes)
configure:19049: checking whether byte ordering is bigendian
configure:19076: gcc -c -O3 -fPIC -DLAM_BUILDING=1 conftest.c >&5
configure:19082: $? = 0
configure:19086: test -z
|
