Your DSUPERLULIB is defined to be in the top directory for SuperLU, but
the linker couldn't find the library in there. Were there any compile
errors? If not, look around inside the SuperLU directory's subdirectories
and see if it ended up in one of those. I don't have my SuperLU backups
here in front of me, but I'll dig them up tonight and see what I did. I
vaguely remember the library directories being wonky on mine too.
Damien
> Ok, I did some changes like you recommended and this is what I get now.
>
> Script started on Sat 07 Jan 2006 03:33:10 AM CST
> ]0;sam_at_fc4vm1:/opt/SuperLU_DIST_2.0 [root_at_fc4vm1 SuperLU_DIST_2.0]# make
> ( cd INSTALL; make )
> make[1]: Entering directory `/opt/SuperLU_DIST_2.0/INSTALL'
> mpicc -c dlamch.c
> mpicc -pipe -O2 -c lsame.c
> mpicc -pipe -O2 -c dlamchtst.c
> mpif77 -o testdlamch dlamch.o lsame.o dlamchtst.o
> mpicc -c slamch.c
> mpicc -pipe -O2 -c slamchtst.c
> mpif77 -o testslamch slamch.o lsame.o slamchtst.o
> mpicc -c superlu_timer.c
> mpicc -pipe -O2 -c timertst.c
> mpif77 -o testtimer superlu_timer.o timertst.o \
>
> make[1]: Leaving directory `/opt/SuperLU_DIST_2.0/INSTALL'
> ( cd SRC; make )
> make[1]: Entering directory `/opt/SuperLU_DIST_2.0/SRC'
> mpicc -pipe -O2 -DAdd__ -c dlangs.c
> mpicc -pipe -O2 -DAdd__ -c dgsequ.c
> mpicc -pipe -O2 -DAdd__ -c dlaqgs.c
> mpicc -pipe -O2 -DAdd__ -c dutil.c
> mpicc -pipe -O2 -DAdd__ -c dmemory.c
> mpicc -pipe -O2 -DAdd__ -c dmyblas2.c
> mpicc -pipe -O2 -DAdd__ -c dsp_blas2.c
> mpicc -pipe -O2 -DAdd__ -c dsp_blas3.c
> mpicc -pipe -O2 -DAdd__ -c dldperm.c
> mpicc -pipe -O2 -DAdd__ -c ddistribute.c
> mpicc -pipe -O2 -DAdd__ -c pdgstrf_irecv.c
> mpicc -pipe -O2 -DAdd__ -c pdgstrs_Bglobal.c
> mpicc -pipe -O2 -DAdd__ -c pdgstrs1.c
> mpicc -pipe -O2 -DAdd__ -c pdgssvx_ABglobal.c
> mpicc -pipe -O2 -DAdd__ -c pdgsrfs_ABXglobal.c
> mpicc -pipe -O2 -DAdd__ -c pdgsmv_AXglobal.c
> mpicc -pipe -O2 -DAdd__ -c pdgssvx.c
> mpicc -pipe -O2 -DAdd__ -c pdgstrs.c
> mpicc -pipe -O2 -DAdd__ -c pddistribute.c
> mpicc -pipe -O2 -DAdd__ -c pdlangs.c
> mpicc -pipe -O2 -DAdd__ -c pdutil.c
> mpicc -pipe -O2 -DAdd__ -c pdgsequ.c
> mpicc -pipe -O2 -DAdd__ -c pdlaqgs.c
> mpicc -pipe -O2 -DAdd__ -c pdgsrfs.c
> mpicc -pipe -O2 -DAdd__ -c pdgsmv.c
> mpicc -pipe -O2 -DAdd__ -c pdgstrs_lsum.c
> mpicc -pipe -O2 -DAdd__ -c symbfact.c
> mpicc -pipe -O2 -DAdd__ -c sp_ienv.c
> mpicc -pipe -O2 -DAdd__ -c etree.c
> mpicc -pipe -O2 -DAdd__ -c sp_colorder.c
> mpicc -pipe -O2 -DAdd__ -c get_perm_c.c
> mpicc -pipe -O2 -DAdd__ -c mmd.c
> mpicc -pipe -O2 -DAdd__ -c comm.c
> mpicc -pipe -O2 -DAdd__ -c memory.c
> mpicc -pipe -O2 -DAdd__ -c util.c
> mpicc -pipe -O2 -DAdd__ -c superlu_grid.c
> mpicc -pipe -O2 -DAdd__ -c pxerbla.c
> mpicc -pipe -O2 -DAdd__ -c superlu_timer.c
> mpicc -pipe -O2 -DAdd__ -c GetDiagU.c
> mpif77 -c mc64ad.f
> mpif77 -c mc21.f
> mpicc -pipe -O2 -DAdd__ -c lsame.c
> mpicc -pipe -O2 -DAdd__ -c xerbla.c
> xerbla.c: In function ‘xerbla_’:
> xerbla.c:35: warning: incompatible implicit declaration of built-in
> function
> ‘printf’
> mpicc -DAdd__ -c slamch.c
> mpicc -DAdd__ -c dlamch.c
> mpicc -march=i686 /opt/SuperLU_DIST_2.0/libsuperlu_dist_2.0.a \
> dlangs.o dgsequ.o dlaqgs.o dutil.o dmemory.o dmyblas2.o dsp_blas2.o
> dsp_blas3.o dldperm.o ddistribute.o pdgstrf_irecv.o pdgstrs_Bglobal.o
> pdgstrs1.o pdgssvx_ABglobal.o pdgsrfs_ABXglobal.o pdgsmv_AXglobal.o
> pdgssvx.o pdgstrs.o pddistribute.o pdlangs.o pdutil.o pdgsequ.o pdlaqgs.o
> pdgsrfs.o pdgsmv.o pdgstrs_lsum.o symbfact.o sp_ienv.o etree.o
> sp_colorder.o
> get_perm_c.o mmd.o comm.o memory.o util.o superlu_grid.o pxerbla.o
> superlu_timer.o GetDiagU.o mc64ad.o mc21.o lsame.o xerbla.o slamch.o
> dlamch.o
> i386-redhat-linux-gcc: /opt/SuperLU_DIST_2.0/libsuperlu_dist_2.0.a: No
> such
> file or directory
> mpicc: No such file or directory
> make[1]: *** [double] Error 1
> make[1]: Leaving directory `/opt/SuperLU_DIST_2.0/SRC'
> make: *** [superlulib] Error 2
> ]0;sam_at_fc4vm1:/opt/SuperLU_DIST_2.0 [root_at_fc4vm1 SuperLU_DIST_2.0]#
> ]0;sam_at_fc4vm1:/opt/SuperLU_DIST_2.0 [root_at_fc4vm1 SuperLU_DIST_2.0]#
> ]0;sam_at_fc4vm1:/opt/SuperLU_DIST_2.0 [root_at_fc4vm1 SuperLU_DIST_2.0]#
> ]0;sam_at_fc4vm1:/opt/SuperLU_DIST_2.0 [root_at_fc4vm1 SuperLU_DIST_2.0]#
> ]0;sam_at_fc4vm1:/opt/SuperLU_DIST_2.0 [root_at_fc4vm1 SuperLU_DIST_2.0]# cat
> make.inc
> ############################################################################
> #
> # Program: SuperLU_DIST
> #
> # Module: make.inc
> #
> # Purpose: Top-level Definitions
> #
> # Creation date: February 4, 1999 version alpha
> #
> # Modified: September 1, 1999 version 1.0
> # March 15, 2003 version 2.0
> #
> ############################################################################
> #
> # The machine (platform) identifier to append to the library names
> #
> PLAT = _i686
>
> #
> # The name of the libraries to be created/linked to
> #
> DSuperLUroot = /opt/SuperLU_DIST_2.0
> DSUPERLULIB = $(DSuperLUroot)/libsuperlu_dist_2.0.a
> #
> BLASDEF =
> BLASLIB = -lblas -lm
> MPILIB =
>
> #PERFLIB = -L/vol1/VAMPIR/lib -lVT
> LIBS = $(DSUPERLULIB) $(BLASLIB) $(PERFLIB) $(MPILIB)
>
> #
> # The archiver and the flag(s) to use when building archive (library)
> # If your system has no ranlib, set RANLIB = echo.
> #
> ARCH = mpicc -march=i686
> ARCHFLAGS =
> RANLIB = ranlib
>
> ############################################################################
> # C compiler setup
> CC = mpicc
> # CFLAGS should be set to be the C flags that include optimization
> CFLAGS = -pipe -O2
> #
> # NOOPTS should be set to be the C flags that turn off any optimization
> NOOPTS =
> ############################################################################
> # FORTRAN compiler setup
> FORTRAN = mpif77
> FFLAGS =
> ############################################################################
> LOADER = mpif77
>
> # 32-bit:
> LOADOPTS =
> ############################################################################
> # C preprocessor defs for compilation (-DNoChange, -DAdd_, or -DUpCase)
> #
> # Need follow the convention of how C calls a Fortran routine.
> #
> CDEFS = -DAdd__
> ]0;sam_at_fc4vm1:/opt/SuperLU_DIST_2.0 [root_at_fc4vm1 SuperLU_DIST_2.0]# exit
>
> Script done on Sat 07 Jan 2006 03:33:54 AM CST
>
> Sam Adams
> General Dynamics - Network Systems
> Phone: 210.536.5945
>
> -----Original Message-----
> From: lam-bounces_at_[hidden] [mailto:lam-bounces_at_[hidden]] On Behalf
> Of
> damien_at_[hidden]
> Sent: Thursday, January 12, 2006 3:08 PM
> To: General LAM/MPI mailing list
> Subject: Re: LAM: installing superLU-dist 2.0
>
> Sam,
>
> the ufffff looks like corruption, unless there's some unusual temporary
> directories somewhere. I'd re-extract everything and try again. It's
> been a while since I built and used SuperLU-Dist, but if you're building
> with gfortran in gcc, the CDEFS should be -DAdd__ . GCC-based fortran
> adds two underscores.
>
> Having said that, can I make a couple of non-LAM suggestions? Use the
> MUMPS solver, http://graal.ens-lyon.fr/MUMPS/ instead. It's a minimum of
> 2x faster than SuperLU-Dist on every problem I've tried, and usually 3 or
> 4x, and it's better at badly-scaled matrices. If you have trouble getting
> the code, email me off-list. MUMPS is also faster than the threaded
> SuperLU on a multiprocessor box. Also, the g95 fortran compiler (
> g95.sourceforge.net ) is in better shape than gfortran. Mail me off-list
> if you have any problems getting it going, I run MUMPS daily on a LAM
> cluster and it's rock-solid.
>
> Damien
>
>> I was wondering if any of you guy have had any luck installing
>> SuperLD-Dist
>> using Lam-mpi 7.1.1, and gcc 4. I was just basically trying to be
>> generic
>> using FC4 with the stock lam, and gcc. I guess the trick it just to get
>> the
>> make.inc file set up properly for lam.
>>
>> This is what I have in mine.
>>
> ############################################################################
>> #
>> # Program: SuperLU_DIST
>> #
>> # Module: make.inc
>> #
>> # Purpose: Top-level Definitions
>> #
>> # Creation date: February 4, 1999 version alpha
>> #
>> # Modified: September 1, 1999 version 1.0
>> # March 15, 2003 version 2.0
>> #
>>
> ############################################################################
>> #
>> # The machine (platform) identifier to append to the library names
>> #
>> PLAT = _i386
>>
>> #
>> # The name of the libraries to be created/linked to
>> #
>> DSuperLUroot = /opt/SuperLU_DIST_2.0
>> DSUPERLULIB = $(DSuperLUroot)/libsuperlu_dist_2.0.a
>> #
>> BLASDEF = #-DUSE_VENDOR_BLAS
>> BLASLIB = -L/usr/lib/ -lblas -lm
>> MPILIB = /usr/lib/libmpi.a /usr/lib/liblamf77mpi.a
>> /usr/lib/liblammpi++.a /usr/lib/liblammpio.a
>>
>> #-L/usr/lib/ -llammpio #-L/usr/local/lib/libmpich.a
>> -L/usr/local/lib/libpmpich.a -L/usr/local/lib/libpmpich++.a
>> #/usr/lpp/ppe.poe/lib -lmpi_r
>> #PERFLIB = -L/vol1/VAMPIR/lib -lVT
>> LIBS = $(DSUPERLULIB) $(BLASLIB) $(PERFLIB) $(MPILIB)
>>
>> #
>> # The archiver and the flag(s) to use when building archive (library)
>> # If your system has no ranlib, set RANLIB = echo.
>> #
>> ARCH = mpic++ -march=i386 #ar
>> # 64-bit:
>> #ARCHFLAGS = -X64 cr
>> ARCHFLAGS = # cr
>> RANLIB = ranlib
>>
>>
> ############################################################################
>> # C compiler setup
>> # 64-bit
>> #CC = mpcc_r
>> CC = mpic++
>> # CFLAGS should be set to be the C flags that include optimization
>> CFLAGS = -pipe -O2 #-D_SP -qarch=PWR3 -qalias=allptrs \
>> #-DDEBUGlevel=0 -DPRNTlevel=1 -O3
>> #-q64 #-qwarn64 -D_LONGINT
>> #
>> # NOOPTS should be set to be the C flags that turn off any optimization
>> # 64-bit
>> #NOOPTS = -q64
>> NOOPTS =
>>
> ############################################################################
>> # FORTRAN compiler setup
>> # 64-bit
>> #FORTRAN = mpxlf90_r
>> FORTRAN = mpif77 #mpxlf90
>> FFLAGS = #-WF,-Dsp -O3 -Q -qstrict -qfixed -qinit=f90ptr
>> -qarch=pwr3
>> #-q64 #-qintsize=8
>>
> ############################################################################
>> # 64-bit
>> #LOADER = mpxlf90_r
>> LOADER = mpic++
>>
>> # 32-bit:
>> LOADOPTS = #-bmaxdata:0x70000000
>> # 64-bit:
>> #LOADOPTS = -q64
>>
> ############################################################################
>> # C preprocessor defs for compilation (-DNoChange, -DAdd_, or -DUpCase)
>> #
>> # Need follow the convention of how C calls a Fortran routine.
>> #
>> CDEFS = -DAdd_ -L/usr/lib/libmpi.a -L/usr/lib/liblamf77mpi.a
>> -L/usr/lib/liblammpi++.a -L/usr/lib/liblammpio.a #mpxlf90-DNoChange
>> [root_at_fc4vm1 SuperLU_DIST_2.0]#
>> [root_at_fc4vm1 SuperLU_DIST_2.0]#
>> [root_at_fc4vm1 SuperLU_DIST_2.0]#
>>
>> When I do the make this is the message that I get.
>>
>> [root_at_fc4vm1 SuperLU_DIST_2.0]# make
>> ( cd INSTALL; make )
>> make[1]: Entering directory `/opt/SuperLU_DIST_2.0/INSTALL'
>> make[1]: Nothing to be done for `all'.
>> make[1]: Leaving directory `/opt/SuperLU_DIST_2.0/INSTALL'
>> ( cd SRC; make )
>> make[1]: Entering directory `/opt/SuperLU_DIST_2.0/SRC'
>> mpic++ -pipe -O2 -DAdd_ -L/usr/lib/libmpi.a -L/usr/lib/liblamf77mpi.a
>> -L/usr/lib/liblammpi++.a -L/usr/lib/liblammpio.a -c dldperm.c
>> dldperm.c: In function \uffff\uffff\uffffvoid dldperm(int_t, int_t,
>> int_t,
>> int_t*, int_t*, double*, int_t*, double*, double*)\uffff\uffff\uffff:
>> dldperm.c:122: error: \uffff\uffff\uffffmc64id_\uffff\uffff\uffff was
>> not
>> declared in this scope
>> mpic++: No such file or directory
>> make[1]: *** [dldperm.o] Error 1
>> make[1]: Leaving directory `/opt/SuperLU_DIST_2.0/SRC'
>> make: *** [superlulib] Error 2
>>
>>
>> Anyway, if anyone has experince getting this compiled with lam, I would
>> appriciate the help.
>>
>> Sam
>> _______________________________________________
>> This list is archived at http://www.lam-mpi.org/MailArchives/lam/
>>
>
>
> _______________________________________________
> This list is archived at http://www.lam-mpi.org/MailArchives/lam/
>
> _______________________________________________
> This list is archived at http://www.lam-mpi.org/MailArchives/lam/
|
