Hi,
I have continued to investigate my cygwin problem.
It is also present in the CVS snapshot "lam-7.1a1cvs20040107.tar.gz"
I added debug msg to the script "configure" and have tracked the problem
down to the following piece of code:
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
sed "$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s,@configure_input@,$configure_input,;t t
s,@srcdir@,$ac_srcdir,;t t
s,@abs_srcdir@,$ac_abs_srcdir,;t t
s,@top_srcdir@,$ac_top_srcdir,;t t
s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
s,@builddir@,$ac_builddir,;t t
s,@abs_builddir@,$ac_abs_builddir,;t t
s,@top_builddir@,$ac_top_builddir,;t t
s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
s,@INSTALL@,$ac_INSTALL,;t t
" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
It seems that "sed" cannot complete its task. Now I have a little
experience with regular expressions and have seen this type of problem
before. Some regular expressions which never finish when I use the
java.util.regexp packages work fine if I switch to the ORO class
libraries. Am I on the right lines?
Any help appreciated
chrisb
Christopher Barton wrote:
> Hi
>
> I'm running Cygwin version 1.5.5-1 under Windows XP.
>
> I downloaded "lam-7.1a1cvs20040106.tar.gz" and did the following:
>
> started up xterm from cygwin
>
> gzip -d lam-7.1a1cvs20040106.tar.gz
> tar -xvf lam-7.1a1cvs20040106.tar
> cd lam-7.1a1cvs20040106
>
> export CC=cc
> export CXX=CC
> export FC=f77
>
> ./autogen.sh
> ./configure &> configure.log
>
> // Didn't work (see end) so tried again after looking at the mail archive
>
> ./autogen.sh
> ./configure --without-romio &> configure.log
>
> // Didn't work (see end) so tried again after looking at the mail archive
>
> ipc-daemon2 &
> ./autogen.sh
> ./configure --without-romio &> configure.log
>
> Each time ./configure runs fine until it gets to the "TotalView"
> modules (see below). At this point "top" shows "sed" to be running but
> I have left it overnight and in the morning it is still at the same
> point.
>
> Any ideas. I also tried this with the regular Cygwin terminal and get
> the same behaviour. I've attached my configure.log
>
> I'll try out the new snapshot from the 7th today
>
> Thanks
>
> chrisb
>
>
> ============================================================================
>
> == Final top-level LAM configuration
> ============================================================================
>
>
> *** Miscellaneous configuration
> checking if want extra wrapper compiler LDFLAGS... no (shared libs
> disabled)
> checking which of CFLAGS are ok for TotalView modules...
> checking extra CFLAGS for TotalView modules... -g
>
> *** Final output
> configure: creating ./config.status
> config.status: creating Makefile
>
> ||
>
>------------------------------------------------------------------------
>
>
>============================================================================
>== Configuring LAM version 7.1a1cvs20040106
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>configure: builddir: /cygdrive/c/home/e176/tools/lam-7.1a1cvs20040106
>configure: srcdir: /cygdrive/c/home/e176/tools/lam-7.1a1cvs20040106
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>checking whether the C compiler (cc -O3 ) accepts ANSI prototypes... yes
>checking for type int2... no
>checking for type uint2... no
>checking for type int4... no
>checking for type uint4... no
>checking for type int8... no
>checking for type uint8... no
>checking for type float4... no
>checking for type float8... no
>checking size of char... 1
>checking size of short... 2
>checking size of wchar_t... 2
>checking size of int... 4
>checking size of long... 4
>checking size of long long... 8
>checking size of float... 4
>checking size of double... 8
>checking size of long double... 12
>checking size of void *... 4
>checking alignment of char... 1
>checking alignment of short... 2
>checking alignment of wchar_t... 2
>checking alignment of int... 4
>checking alignment of long... 4
>checking alignment of long long... 8
>checking alignment of float... 4
>checking alignment of double... 8
>checking alignment of long double... 4
>checking alignment of void *... 4
>
>*** C++ compiler and preprocessor
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking if want C++ exception handling... no
>checking whether CC has new(std::nothrow)... no
>checking for C++ template repository directory... not used
>checking for C++ compiler template parameters... none needed
>checking for C++ optimization flags... -O3
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking map usability... yes
>checking map presence... yes
>checking for map... yes
>checking for type bool... yes
>checking for true/false... yes
>checking size of bool... 1
>checking size of int... 4
>checking alignment of bool... 1
>checking alignment of int... 4
>checking how to store bool in C... unsigned char
>
>*** Fortran Compiler
>checking for f77... f77
>checking how to add a library directory to f77... "-L"
>checking f77 external naming convention... FORTRANDOUBLEUNDERSCORE
>checking for FORTRAN optimization flags... -O
>checking size of FORTRAN INTEGER... 4
>checking size of FORTRAN REAL... 4
>checking size of FORTRAN DOUBLE PRECISION... 8
>checking size of FORTRAN COMPLEX... 8
>checking size of FORTRAN DOUBLE COMPLEX... 16
>checking alignment of FORTRAN INTEGER... 4
>checking alignment of FORTRAN REAL... 4
>checking alignment of FORTRAN DOUBLE PRECISION... 8
>checking alignment of FORTRAN COMPLEX... 4
>checking alignment of FORTRAN DOUBLE COMPLEX... 8
>
>*** LAM configuration options
>checking if want profiling interface... yes
>checking if want full installation of Trillium files... no
>checking if want ROMIO support... no
>checking if want FORTRAN support... yes
>checking if want MPI 2 C++ support... yes
>checking if want MPI::File C++ binding support... no
>checking if want IMPI support... no
>checking how to yeild... yield()
>checking for LAM user signal... SIGUSR2
>checking if want purify clean... no
>checking for desired boot timeout... 60 seconds
>checking for desired lamd packet resend time... 500000 seconds
>checking for desired lamd heartbeat time... 120 seconds
>checking if want stub MPI functions... no
>checking if want default promiscuous boot connections... no
>
>*** System-specific tests
>checking whether ln -s works... yes
>checking for cp... /usr/bin/cp
>checking for rm... /usr/bin/rm
>checking for sh... /usr/bin/sh
>checking if installed perl can support mpiexec... yes
>checking for prototype of snprintf... yes
>checking for prototype of gethostname... yes
>checking stropts.h usability... no
>checking stropts.h presence... no
>checking for stropts.h... no
>checking grp.h usability... yes
>checking grp.h presence... yes
>checking for grp.h... yes
>checking netinet/tcp.h usability... yes
>checking netinet/tcp.h presence... yes
>checking for netinet/tcp.h... yes
>checking sys/select.h usability... yes
>checking sys/select.h presence... yes
>checking for sys/select.h... yes
>checking sys/resource.h usability... yes
>checking sys/resource.h presence... yes
>checking for sys/resource.h... yes
>checking rpc/types.h usability... yes
>checking rpc/types.h presence... yes
>checking for rpc/types.h... yes
>checking for rpc/xdr.h... yes
>checking pty.h usability... yes
>checking pty.h presence... yes
>checking for pty.h... yes
>checking util.h usability... no
>checking util.h presence... no
>checking for util.h... no
>checking sched.h usability... yes
>checking sched.h presence... yes
>checking for sched.h... yes
>checking for strings.h... (cached) yes
>checking if FIONBIO defined in sys/ioctl.h... not on AIX 4.3.3, so who cares?
>checking if SA_RESTART defined in signal.h... yes
>checking for sa_len in struct sockaddr... no
>checking for union semun in sys/sem.h... no
>checking if need to include sys/select.h... yes
>checking for socket... yes
>checking for gethostbyname... yes
>checking for login in -lutil... yes
>checking for openpty... yes
>checking for atexit... yes
>checking for getcwd... yes
>checking for yield... no
>checking for snprintf... yes
>checking for atoll... no
>checking for strtoll... yes
>checking for sched_yield... yes
>checking whether vscanf is declared... yes
>checking whether va_copy is declared... yes
>checking whether __va_copy is declared... yes
>checking for glibc... no
>checking whether to use prefix memcpy()... no (default on non-glibc systems: no)
>checking whether byte ordering is bigendian... no
>checking for struct semid_ds... yes
>checking if SYSV semaphores work... no
>checking if SYSV semaphores work with -lrt... no
>checking if SYSV semaphores work with -lcygipc... yes
>checking for SYSV semaphore support... yes
>checking for struct shmid_ds... yes
>checking if SYSV shared memory works... yes
>checking for SYSV shared memory support... yes
>checking if C compiler and POSIX threads work as is... yes
>checking if C++ compiler and POSIX threads work as is... yes
>checking if F77 compiler and POSIX threads work as is... yes
>checking for working POSIX threads package... yes
>checking if C compiler and Solaris threads work... no
>checking if C++ compiler and Solaris threads work... no
>checking if F77 compiler and Solaris threads work... no
>checking for working Solaris threads package... no
>checking for type of thread support... posix
>checking if threads have different pids (pthreads on linux)... no
>./configure: line 18680: LAM_CHECK_FD_SETSIZE: command not found
>checking BSD 4.3 for msg_accrights in struct msghdr... yes
>checking BSD 4.3 fd passing example... failed
>checking for BSD 4.3 fd passing support... no
>checking for POSIX.1g struct msghdr... no
>checking for BSD 4.4 fd passing support... no
>checking for System V Release 4 for struct strrecvfd... no
>checking for System V Release 4 fd passing support... no
>
>*******************************************************************************
>WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
>*******************************************************************************
>
>Your system does not appear to have supoprt for file descriptor passing.
>While it is possible to use LAM/MPI on such a system, some functionality
>will be missing - most notably, stdout/stderr of remote MPI processes.
>
>If you believe that your system does actually have file descriptor passing
>support, please contact the LAM/MPI mailing list (lam_at_[hidden]).
>
>*******************************************************************************
>WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
>*******************************************************************************
>
>checking for BSD ptys... no
>checking for SYSV ptys... yes
>checking size of struct stat members... 4
>checking type of getsockopt optlen parameter... socklen_t
>checking type of recvfrom length parameter... socklen_t
>checking if build filesystem is case sensitive... no
>checking if configuring for case sensitive fs... no
>
>*******************************************************************************
>NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE
>*******************************************************************************
>
>Because LAM/MPI is being installed on a non-case sensitive file system, the
>C++ wrapper compiler will be named mpic++ instead of the traditional mpiCC.
>
>Please update any makefiles appropriately.
>
>*******************************************************************************
>NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE NOTE
>*******************************************************************************
>
>
>*** Optional modules
>checking if want MPI C++ bindings... enabled
>checking size of int... 4
>checking size of bool... 1
>checking type of MPI attributes... int
>checking for signal declaration... SYSV
>checking if want ROMIO... disabled
>checking if want TotalView attach support... enabled
>checking if want TotalView queue debugging support... enabled
>checking for bproc_numnodes in -lbproc... no
>checking if want BPROC support... no
>checking if want deprecated executable names... yes
>checking for subdir args... '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77'
>
>============================================================================
>== Totalview message queue debugging support
>============================================================================
>
>configure: LAM configuring in share/totalview
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>checking size of void *... 4
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking whether -lc should be explicitly linked in... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... yes
>checking whether to build static libraries... no
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... yes
>checking whether to build static libraries... no
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/totalview
>
>*** SSI modules
>checking which modules should be run-time loadable... none
>checking for SSI kinds... boot coll crlam crmpi rpi
>configure: LAM configuring in share/ssi/boot/bproc
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI boot bproc module version 1.0cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the bproc boot to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** SSI boot bproc-specific setup
>./configure: line 4215: SSI_CONFIGURE_STUB: command not found
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-boot-bproc-config.h
>config.status: src/lam-ssi-boot-bproc-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/boot/bproc
>configure: +++ SSI module boot:bproc compile: yes
>configure: +++ SSI module boot:bproc mode: static
>
>configure: LAM configuring in share/ssi/boot/globus
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI boot globus module version 0.5cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the globus boot to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-boot-globus-config.h
>config.status: src/lam-ssi-boot-globus-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/boot/globus
>configure: +++ SSI module boot:globus compile: yes
>configure: +++ SSI module boot:globus mode: static
>
>configure: LAM configuring in share/ssi/boot/rsh
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI boot rsh module version 1.0cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the rsh boot to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** SSI boot rsh-specific setup
>./configure: line 4213: SSI_CONFIGURE_STUB: command not found
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-boot-rsh-config.h
>config.status: src/lam-ssi-boot-rsh-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/boot/rsh
>configure: +++ SSI module boot:rsh compile: yes
>configure: +++ SSI module boot:rsh mode: static
>
>configure: LAM configuring in share/ssi/boot/slurm
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI boot slurm module version 1.0cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the slurm boot to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** SSI boot slurm-specific setup
>./configure: line 4215: SSI_CONFIGURE_STUB: command not found
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-boot-slurm-config.h
>config.status: src/lam-ssi-boot-slurm-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/boot/slurm
>configure: +++ SSI module boot:slurm compile: yes
>configure: +++ SSI module boot:slurm mode: static
>
>configure: LAM configuring in share/ssi/boot/tm
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI boot tm module version 1.0cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the tm boot to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** SSI boot tm-specific setup
>./configure: line 4213: SSI_CONFIGURE_STUB: command not found
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-boot-tm-config.h
>config.status: src/lam-ssi-boot-tm-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/boot/tm
>configure: +++ SSI module boot:tm compile: yes
>configure: +++ SSI module boot:tm mode: static
>
>configure: LAM configuring in share/ssi/coll/impi
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI coll impi module version 7.0cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the impi coll to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** SSI coll impi-specific setup
>./configure: line 4214: SSI_CONFIGURE_STUB: command not found
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-coll-impi-config.h
>config.status: src/lam-ssi-coll-impi-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/coll/impi
>configure: +++ SSI module coll:impi compile: yes
>configure: +++ SSI module coll:impi mode: static
>
>configure: LAM configuring in share/ssi/coll/lam_basic
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI coll lam_basic module version 7.1cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the lam_basic coll to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-coll-lam-basic-config.h
>config.status: src/lam-ssi-coll-lam-basic-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/coll/lam_basic
>configure: +++ SSI module coll:lam_basic compile: yes
>configure: +++ SSI module coll:lam_basic mode: static
>
>configure: LAM configuring in share/ssi/coll/smp
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI coll smp module version 1.1cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the smp coll to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-coll-smp-config.h
>config.status: src/lam-ssi-coll-smp-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/coll/smp
>configure: +++ SSI module coll:smp compile: yes
>configure: +++ SSI module coll:smp mode: static
>
>configure: LAM configuring in share/ssi/crlam/blcr
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI crlam blcr module version 1.0.2cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the blcr crlam to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** SSI crlam blcr-specific setup
>./configure: line 4215: SSI_CONFIGURE_STUB: command not found
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating ssi_crlam_blcr_config.sh
>config.status: creating src/lam-ssi-crlam-blcr-config.h
>config.status: src/lam-ssi-crlam-blcr-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/crlam/blcr
>configure: +++ SSI module crlam:blcr compile: yes
>configure: +++ SSI module crlam:blcr mode: static
>
>configure: LAM configuring in share/ssi/crmpi/blcr
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI crmpi blcr module version 1.0.2cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the blcr crmpi to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** SSI crmpi blcr-specific setup
>./configure: line 4215: SSI_CONFIGURE_STUB: command not found
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-crmpi-blcr-config.h
>config.status: src/lam-ssi-crmpi-blcr-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/crmpi/blcr
>configure: +++ SSI module crmpi:blcr compile: yes
>configure: +++ SSI module crmpi:blcr mode: static
>
>configure: LAM configuring in share/ssi/rpi/crtcp
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI rpi crtcp module version 1.0.1cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the crtcp rpi to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** SSI rpi crtcp-specific setup
>./configure: line 4215: SSI_CONFIGURE_STUB: command not found
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-rpi-crtcp-config.h
>config.status: src/lam-ssi-rpi-crtcp-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/rpi/crtcp
>configure: +++ SSI module rpi:crtcp compile: yes
>configure: +++ SSI module rpi:crtcp mode: static
>
>configure: LAM configuring in share/ssi/rpi/gm
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI rpi gm module version 1.1cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the gm rpi to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output file name... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** C++ compiler and preprocessor
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking if want C++ exception handling... no
>checking whether CC has new(std::nothrow)... no
>checking for C++ template repository directory... not used
>checking for C++ compiler template parameters... none needed
>checking for C++ optimization flags... -O3
>
>*** SSI rpi gm-specific setup
>./configure: line 5514: SSI_CONFIGURE_STUB: command not found
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating ptmalloc/Makefile
>config.status: creating src/Makefile
>config.status: creating ssi_rpi_gm_config.sh
>config.status: creating src/lam-ssi-rpi-gm-config.h
>config.status: src/lam-ssi-rpi-gm-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/rpi/gm
>configure: +++ SSI module rpi:gm compile: yes
>configure: +++ SSI module rpi:gm mode: static
>
>configure: LAM configuring in share/ssi/rpi/ib
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI rpi ib module version 0.5cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the ib rpi to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** C++ compiler and preprocessor
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking if want C++ exception handling... no
>checking whether CC has new(std::nothrow)... no
>checking for C++ template repository directory... not used
>checking for C++ compiler template parameters... none needed
>checking for C++ optimization flags... -O3
>
>*** SSI rpi ib-specific setup
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking for VAPI_open_hca in -lvapi... no
>configure: error: *** Cannot find working libvapi.
>configure: /bin/bash './configure' *failed* for share/ssi/rpi/ib
>configure: --- SSI module rpi:ib compile: no
>
>configure: LAM configuring in share/ssi/rpi/lamd
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI rpi lamd module version 7.0cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the lamd rpi to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-rpi-lamd-config.h
>config.status: src/lam-ssi-rpi-lamd-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/rpi/lamd
>configure: +++ SSI module rpi:lamd compile: yes
>configure: +++ SSI module rpi:lamd mode: static
>
>configure: LAM configuring in share/ssi/rpi/sysv
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI rpi sysv module version 7.0cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the sysv rpi to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** SSI rpi sysv-specific setup
>checking for sys/sem.h... yes
>checking for SYSV semaphore support... yes
>checking for sys/ipc.h... yes
>checking for sys/shm.h... yes
>checking for SYSV shared memory support... yes
>checking for TCP short message length... 65536 bytes
>checking user-specified shared memory short message length... 8192 bytes
>checking user-specified shared memory pool size... need to calculate
>checking user-specified maximum shared memory allocation... need to calculate
>checking shared memory poolsize... 16777216 bytes
>checking shared memory maxalloc... 1048576 bytes
>checking if want use of pthread lock... no
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-rpi-sysv-config.h
>config.status: src/lam-ssi-rpi-sysv-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/rpi/sysv
>configure: +++ SSI module rpi:sysv compile: yes
>configure: +++ SSI module rpi:sysv mode: static
>
>configure: LAM configuring in share/ssi/rpi/tcp
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI rpi tcp module version 7.0cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the tcp rpi to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** SSI rpi tcp-specific setup
>checking for TCP short message length... 65536 bytes
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-rpi-tcp-config.h
>config.status: src/lam-ssi-rpi-tcp-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/rpi/tcp
>configure: +++ SSI module rpi:tcp compile: yes
>configure: +++ SSI module rpi:tcp mode: static
>
>configure: LAM configuring in share/ssi/rpi/usysv
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>
>============================================================================
>== Configuring SSI rpi usysv module version 7.0cvs
>============================================================================
>
>*** Initialization, setup
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for prefix by checking for lamclean... no
>installing to directory "/usr/local"
>checking if want the usysv rpi to be the default... no
>checking if want module to be run-time loadable... no
>
>*** C compiler and preprocessor
>checking if want debugging output support... no
>checking for gcc... cc
>checking for C compiler default output... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... gcc3
>checking how to run the C preprocessor... cc -E
>checking for egrep... grep -E
>checking whether cc needs -traditional... no
>checking for AIX... no
>checking if need special C compiler/linker flags... none needed
>checking for C optimization flags... -O3
>
>*** SSI rpi usysv-specific setup
>checking for sys/sem.h... yes
>checking for SYSV semaphore support... yes
>checking for sys/ipc.h... yes
>checking for sys/shm.h... yes
>checking for SYSV shared memory support... yes
>checking for TCP short message length... 65536 bytes
>checking user-specified shared memory short message length... 8192 bytes
>checking user-specified shared memory pool size... need to calculate
>checking user-specified maximum shared memory allocation... need to calculate
>checking shared memory poolsize... 16777216 bytes
>checking shared memory maxalloc... 1048576 bytes
>checking if want use of pthread lock... no
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... gcc3
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config/Makefile
>config.status: creating src/Makefile
>config.status: creating src/lam-ssi-rpi-usysv-config.h
>config.status: src/lam-ssi-rpi-usysv-config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/ssi/rpi/usysv
>configure: +++ SSI module rpi:usysv compile: yes
>configure: +++ SSI module rpi:usysv mode: static
>
>
>============================================================================
>== Libtool / libltdl configuration
>============================================================================
>
>*** GNU libtool setup
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether f77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking whether a program can dlopen itself... no
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking whether a program can dlopen itself... (cached) no
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for f77 option to produce PIC...
>checking if f77 supports -c -o file.o... yes
>checking whether the f77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>
>*** GNU libltdl setup
>configure: LAM configuring in share/libltdl
>configure: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --enable-ltdl-convenience --disable-ltdl-install --disable-shared --enable-static --cache-file=/dev/null --srcdir=.
>checking for a BSD-compatible install... /usr/bin/install -c
>checking whether build environment is sane... yes
>checking for gawk... gawk
>checking whether make sets $(MAKE)... yes
>checking for gcc... cc
>checking for C compiler default output... a.exe
>checking whether the C compiler works... yes
>checking whether we are cross compiling... no
>checking for suffix of executables... .exe
>checking for suffix of object files... o
>checking whether we are using the GNU C compiler... yes
>checking whether cc accepts -g... yes
>checking for cc option to accept ANSI C... none needed
>checking for style of include used by make... GNU
>checking dependency style of cc... none
>checking for an ANSI C-conforming const... yes
>checking for inline... inline
>checking build system type... i686-pc-cygwin
>checking host system type... i686-pc-cygwin
>checking for a sed that does not truncate output... /usr/bin/sed
>checking for egrep... grep -E
>checking for ld used by cc... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files... -r
>checking for BSD-compatible nm... /usr/bin/nm -B
>checking whether ln -s works... yes
>checking how to recognise dependent libraries... file_magic ^x86 archive import|^x86 DLL
>checking for dlltool... dlltool
>checking for as... as
>checking for objdump... objdump
>checking how to run the C preprocessor... cc -E
>checking for ANSI C header files... yes
>checking for sys/types.h... yes
>checking for sys/stat.h... yes
>checking for stdlib.h... yes
>checking for string.h... yes
>checking for memory.h... yes
>checking for strings.h... yes
>checking for inttypes.h... yes
>checking for stdint.h... yes
>checking for unistd.h... yes
>checking dlfcn.h usability... yes
>checking dlfcn.h presence... yes
>checking for dlfcn.h... yes
>checking whether we are using the GNU C++ compiler... yes
>checking whether CC accepts -g... yes
>checking dependency style of CC... none
>checking how to run the C++ preprocessor... CC -E
>checking for g77... g77
>checking whether we are using the GNU Fortran 77 compiler... yes
>checking whether g77 accepts -g... yes
>checking the maximum length of command line arguments... 8192
>checking command to parse /usr/bin/nm -B output from cc object... ok
>checking for objdir... .libs
>checking for ar... ar
>checking for ranlib... ranlib
>checking for strip... strip
>checking if cc static flag works... yes
>checking if cc supports -fno-rtti -fno-exceptions... no
>checking for cc option to produce PIC...
>checking if cc supports -c -o file.o... yes
>checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>configure: creating libtool
>appending configuration tag "CXX" to libtool
>checking for ld used by CC... /usr/i686-pc-cygwin/bin/ld.exe
>checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking for CC option to produce PIC...
>checking if CC supports -c -o file.o... yes
>checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>appending configuration tag "F77" to libtool
>checking if libtool supports shared libraries... yes
>checking whether to build shared libraries... no
>checking whether to build static libraries... yes
>checking for g77 option to produce PIC...
>checking if g77 supports -c -o file.o... yes
>checking whether the g77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries... yes
>checking how to hardcode library paths into programs... immediate
>checking whether stripping libraries is possible... yes
>checking dynamic linker characteristics... Win32 ld.exe
>checking for dirent.h that defines DIR... yes
>checking for library containing opendir... none required
>checking which extension is used for loadable modules... .dll
>checking which variable specifies run-time library path... PATH
>checking for the default library search path... /lib /usr/lib
>checking for objdir... .libs
>checking whether libtool supports -dlopen/-dlpreopen... yes
>checking for shl_load... no
>checking for shl_load in -ldld... no
>checking for dlopen in -ldl... no
>checking for dlerror... yes
>checking for _ prefix in compiled symbols... yes
>checking whether we have to add an underscore for dlsym... unknown
>checking whether deplibs are loaded by dlopen... unknown
>checking argz.h usability... no
>checking argz.h presence... no
>checking for argz.h... no
>checking for error_t... no
>checking for argz_append... yes
>checking for argz_create_sep... yes
>checking for argz_insert... yes
>checking for argz_next... yes
>checking for argz_stringify... yes
>checking assert.h usability... yes
>checking assert.h presence... yes
>checking for assert.h... yes
>checking ctype.h usability... yes
>checking ctype.h presence... yes
>checking for ctype.h... yes
>checking errno.h usability... yes
>checking errno.h presence... yes
>checking for errno.h... yes
>checking malloc.h usability... yes
>checking malloc.h presence... yes
>checking for malloc.h... yes
>checking for memory.h... (cached) yes
>checking for stdlib.h... (cached) yes
>checking stdio.h usability... yes
>checking stdio.h presence... yes
>checking for stdio.h... yes
>checking for unistd.h... (cached) yes
>checking dl.h usability... no
>checking dl.h presence... no
>checking for dl.h... no
>checking sys/dl.h usability... no
>checking sys/dl.h presence... no
>checking for sys/dl.h... no
>checking dld.h usability... no
>checking dld.h presence... no
>checking for dld.h... no
>checking mach-o/dyld.h usability... no
>checking mach-o/dyld.h presence... no
>checking for mach-o/dyld.h... no
>checking for string.h... (cached) yes
>checking for strchr... yes
>checking for strrchr... yes
>checking for memcpy... yes
>checking for memmove... yes
>checking for strcmp... yes
>checking for closedir... yes
>checking for opendir... yes
>checking for readdir... yes
>configure: creating ./config.status
>config.status: creating Makefile
>config.status: creating config.h
>config.status: config.h is unchanged
>config.status: executing depfiles commands
>configure: /bin/bash './configure' succeeded for share/libltdl
>checking for libtool-supplied linker flags... -Wl,--export-dynamic -lcygipc
>
>============================================================================
>== Final top-level LAM configuration
>============================================================================
>
>*** Miscellaneous configuration
>checking if want extra wrapper compiler LDFLAGS... no (shared libs disabled)
>checking which of CFLAGS are ok for TotalView modules...
>checking extra CFLAGS for TotalView modules... -g
>
>*** Final output
>configure: creating ./config.status
>config.status: creating Makefile
>
>
>------------------------------------------------------------------------
>
>This file contains any messages produced by compilers while
>running configure, to aid debugging if configure makes a mistake.
>
>It was created by configure, which was
>generated by GNU Autoconf 2.59. Invocation command line was
>
> $ ./configure --without-romio
>
>## --------- ##
>## Platform. ##
>## --------- ##
>
>hostname = tynrachel2
>uname -m = i686
>uname -r = 1.5.5(0.94/3/2)
>uname -s = CYGWIN_NT-5.1
>uname -v = 2003-09-20 16:31
>
>/usr/bin/uname -p = unknown
>/bin/uname -X = unknown
>
>/bin/arch = unknown
>/usr/bin/arch -k = unknown
>/usr/convex/getsysinfo = unknown
>hostinfo = unknown
>/bin/machine = unknown
>/usr/bin/oslevel = unknown
>/bin/universe = unknown
>
>PATH: /usr/local/bin
>PATH: /usr/bin
>PATH: /bin
>PATH: /usr/X11R6/bin
>PATH: /cygdrive/c/tools/j2sdk1.4.2_03/bin
>PATH: /cygdrive/c/tools/apache-ant-1.6.0/bin
>PATH: /cygdrive/c/tools/MPICH-1.2.5/mpd/bin
>PATH: /cygdrive/c/tools/MicrosoftVisualStudio/Common/Tools
>PATH: /cygdrive/c/tools/MicrosoftVisualStudio/Common/Msdev98/BIN
>PATH: /cygdrive/c/tools/MicrosoftVisualStudio/DF98/BIN
>PATH: /cygdrive/c/tools/MicrosoftVisualStudio/VC98/BIN
>PATH: /cygdrive/c/WINDOWS/system32
>PATH: /cygdrive/c/WINDOWS
>PATH: /cygdrive/c/WINDOWS/System32/Wbem
>PATH: /cygdrive/c/Program Files/ATI Technologies/ATI Control Panel
>PATH: /cygdrive/c/Program Files/Common Files/Adaptec Shared/System
>
>
>## ----------- ##
>## Core tests. ##
>## ----------- ##
>
>configure:1724: checking for a BSD-compatible install
>configure:1779: result: /usr/bin/install -c
>configure:1790: checking whether build environment is sane
>configure:1833: result: yes
>configure:1866: checking for gawk
>configure:1882: found /usr/bin/gawk
>configure:1892: result: gawk
>configure:1902: checking whether make sets $(MAKE)
>configure:1922: result: yes
>configure:2082: builddir: /cygdrive/c/home/e176/tools/lam-7.1a1cvs20040106
>configure:2084: srcdir: /cygdrive/c/home/e176/tools/lam-7.1a1cvs20040106
>configure:2120: checking build system type
>configure:2138: result: i686-pc-cygwin
>configure:2166: checking host system type
>configure:2180: result: i686-pc-cygwin
>configure:2202: checking for lamclean
>configure:2235: result: no
>configure:2627: checking if want debugging output support
>configure:2641: result: no
>configure:2702: checking for gcc
>configure:2728: result: cc
>configure:2972: checking for C compiler version
>configure:2975: cc --version </dev/null >&5
>cc (GCC) 3.3.1 (cygming special)
>Copyright (C) 2003 Free Software Foundation, Inc.
>This is free software; see the source for copying conditions. There is NO
>warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
>configure:2978: $? = 0
>configure:2980: cc -v </dev/null >&5
>Reading specs from /usr/lib/gcc-lib/i686-pc-cygwin/3.3.1/specs
>Configured with: /GCC/gcc-3.3.1-3/configure --with-gcc --with-gnu-ld --with-gnu-as --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --libdir=/usr/lib --libexecdir=/usr/sbin --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,f77,pascal,java,objc --enable-libgcj --enable-threads=posix --with-system-zlib --enable-nls --without-included-gettext --enable-interpreter --enable-sjlj-exceptions --disable-version-specific-runtime-libs --enable-shared --disable-win32-registry --enable-java-gc=boehm --disable-hash-synchronization --verbose --target=i686-pc-cygwin --host=i686-pc-cygwin --build=i686-pc-cygwin
>Thread model: posix
>gcc version 3.3.1 (cygming special)
>configure:2983: $? = 0
>configure:2985: cc -V </dev/null >&5
>cc: `-V' option must have argument
>configure:2988: $? = 1
>configure:3011: checking for C compiler default output file name
>configure:3014: cc conftest.c >&5
>configure:3017: $? = 0
>configure:3063: result: a.exe
>configure:3068: checking whether the C compiler works
>configure:3074: ./a.exe
>configure:3077: $? = 0
>configure:3094: result: yes
>configure:3101: checking whether we are cross compiling
>configure:3103: result: no
>configure:3106: checking for suffix of executables
>configure:3108: cc -o conftest.exe conftest.c >&5
>configure:3111: $? = 0
>configure:3136: result: .exe
>configure:3142: checking for suffix of object files
>configure:3163: cc -c conftest.c >&5
>configure:3166: $? = 0
>configure:3188: result: o
>configure:3192: checking whether we are using the GNU C compiler
>configure:3216: cc -c conftest.c >&5
>configure:3222: $? = 0
>configure:3226: test -z
> || test ! -s conftest.err
>configure:3229: $? = 0
>configure:3232: test -s conftest.o
>configure:3235: $? = 0
>configure:3248: result: yes
>configure:3254: checking whether cc accepts -g
>configure:3275: cc -c -g conftest.c >&5
>configure:3281: $? = 0
>configure:3285: test -z
> || test ! -s conftest.err
>configure:3288: $? = 0
>configure:3291: test -s conftest.o
>configure:3294: $? = 0
>configure:3305: result: yes
>configure:3322: checking for cc option to accept ANSI C
>configure:3392: cc -c -g -O2 conftest.c >&5
>configure:3398: $? = 0
>configure:3402: test -z
> || test ! -s conftest.err
>configure:3405: $? = 0
>configure:3408: test -s conftest.o
>configure:3411: $? = 0
>configure:3429: result: none needed
>configure:3447: cc -c -g -O2 conftest.c >&5
>conftest.c:2: error: syntax error before "me"
>configure:3453: $? = 1
>configure: failed program was:
>| #ifndef __cplusplus
>| choke me
>| #endif
>configure:3597: checking for style of include used by make
>configure:3625: result: GNU
>configure:3653: checking dependency style of cc
>configure:3736: result: gcc3
>configure:3759: checking how to run the C preprocessor
>configure:3794: cc -E conftest.c
>configure:3800: $? = 0
>configure:3832: cc -E conftest.c
>conftest.c:19:28: ac_nonexistent.h: No such file or directory
>configure:3838: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| /* end confdefs.h. */
>| #include <ac_nonexistent.h>
>configure:3877: result: cc -E
>configure:3901: cc -E conftest.c
>configure:3907: $? = 0
>configure:3939: cc -E conftest.c
>conftest.c:19:28: ac_nonexistent.h: No such file or directory
>configure:3945: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| /* end confdefs.h. */
>| #include <ac_nonexistent.h>
>configure:3989: checking for egrep
>configure:3999: result: grep -E
>configure:4005: checking whether cc needs -traditional
>conftest.c:19:19: sgtty.h: No such file or directory
>configure:4047: result: no
>configure:4065: checking for AIX
>configure:4087: result: no
>configure:4097: checking if need special C compiler/linker flags
>configure:4130: result: none needed
>configure:4342: checking for C optimization flags
>configure:4344: result: -O3
>configure:4352: checking whether the C compiler (cc -O3 ) accepts ANSI prototypes
>configure:4365: result: yes
>configure:4500: checking for type int2
>configure:4518: $CPP $CPPFLAGS conftest.c
>configure:4528: $? = 0
>configure:4537: ...some ugly egrepping...
>configure:4547: $? = 1
>configure:4566: result: no
>configure:4575: checking for type uint2
>configure:4593: $CPP $CPPFLAGS conftest.c
>configure:4603: $? = 0
>configure:4612: ...some ugly egrepping...
>configure:4622: $? = 1
>configure:4641: result: no
>configure:4650: checking for type int4
>configure:4668: $CPP $CPPFLAGS conftest.c
>configure:4678: $? = 0
>configure:4687: ...some ugly egrepping...
>configure:4697: $? = 1
>configure:4716: result: no
>configure:4725: checking for type uint4
>configure:4743: $CPP $CPPFLAGS conftest.c
>configure:4753: $? = 0
>configure:4762: ...some ugly egrepping...
>configure:4772: $? = 1
>configure:4791: result: no
>configure:4800: checking for type int8
>configure:4818: $CPP $CPPFLAGS conftest.c
>configure:4828: $? = 0
>configure:4837: ...some ugly egrepping...
>configure:4847: $? = 1
>configure:4866: result: no
>configure:4875: checking for type uint8
>configure:4893: $CPP $CPPFLAGS conftest.c
>configure:4903: $? = 0
>configure:4912: ...some ugly egrepping...
>configure:4922: $? = 1
>configure:4941: result: no
>configure:4950: checking for type float4
>configure:4968: $CPP $CPPFLAGS conftest.c
>configure:4978: $? = 0
>configure:4987: ...some ugly egrepping...
>configure:4997: $? = 1
>configure:5016: result: no
>configure:5025: checking for type float8
>configure:5043: $CPP $CPPFLAGS conftest.c
>configure:5053: $? = 0
>configure:5062: ...some ugly egrepping...
>configure:5072: $? = 1
>configure:5091: result: no
>configure:5106: checking size of char
>configure:5129: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:5132: $? = 0
>configure:5134: ./conftest.exe
>configure:5137: $? = 0
>configure:5151: result: 1
>configure:5179: checking size of short
>configure:5202: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:5205: $? = 0
>configure:5207: ./conftest.exe
>configure:5210: $? = 0
>configure:5224: result: 2
>configure:5252: checking size of wchar_t
>configure:5275: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:5278: $? = 0
>configure:5280: ./conftest.exe
>configure:5283: $? = 0
>configure:5297: result: 2
>configure:5325: checking size of int
>configure:5348: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:5351: $? = 0
>configure:5353: ./conftest.exe
>configure:5356: $? = 0
>configure:5370: result: 4
>configure:5398: checking size of long
>configure:5421: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:5424: $? = 0
>configure:5426: ./conftest.exe
>configure:5429: $? = 0
>configure:5443: result: 4
>configure:5471: checking size of long long
>configure:5494: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:5497: $? = 0
>configure:5499: ./conftest.exe
>configure:5502: $? = 0
>configure:5516: result: 8
>configure:5544: checking size of float
>configure:5567: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:5570: $? = 0
>configure:5572: ./conftest.exe
>configure:5575: $? = 0
>configure:5589: result: 4
>configure:5617: checking size of double
>configure:5640: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:5643: $? = 0
>configure:5645: ./conftest.exe
>configure:5648: $? = 0
>configure:5662: result: 8
>configure:5690: checking size of long double
>configure:5713: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:5716: $? = 0
>configure:5718: ./conftest.exe
>configure:5721: $? = 0
>configure:5735: result: 12
>configure:5763: checking size of void *
>configure:5786: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:5789: $? = 0
>configure:5791: ./conftest.exe
>configure:5794: $? = 0
>configure:5808: result: 4
>configure:5842: checking alignment of char
>configure:5871: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:5874: $? = 0
>configure:5876: ./conftest.exe
>configure:5879: $? = 0
>configure:5903: result: 1
>configure:5919: checking alignment of short
>configure:5948: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:5951: $? = 0
>configure:5953: ./conftest.exe
>configure:5956: $? = 0
>configure:5980: result: 2
>configure:5996: checking alignment of wchar_t
>configure:6025: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:6028: $? = 0
>configure:6030: ./conftest.exe
>configure:6033: $? = 0
>configure:6057: result: 2
>configure:6073: checking alignment of int
>configure:6102: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:6105: $? = 0
>configure:6107: ./conftest.exe
>configure:6110: $? = 0
>configure:6134: result: 4
>configure:6150: checking alignment of long
>configure:6179: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:6182: $? = 0
>configure:6184: ./conftest.exe
>configure:6187: $? = 0
>configure:6211: result: 4
>configure:6227: checking alignment of long long
>configure:6256: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:6259: $? = 0
>configure:6261: ./conftest.exe
>configure:6264: $? = 0
>configure:6288: result: 8
>configure:6304: checking alignment of float
>configure:6333: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:6336: $? = 0
>configure:6338: ./conftest.exe
>configure:6341: $? = 0
>configure:6365: result: 4
>configure:6381: checking alignment of double
>configure:6410: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:6413: $? = 0
>configure:6415: ./conftest.exe
>configure:6418: $? = 0
>configure:6442: result: 8
>configure:6458: checking alignment of long double
>configure:6487: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:6490: $? = 0
>configure:6492: ./conftest.exe
>configure:6495: $? = 0
>configure:6519: result: 4
>configure:6535: checking alignment of void *
>configure:6564: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:6567: $? = 0
>configure:6569: ./conftest.exe
>configure:6572: $? = 0
>configure:6596: result: 4
>configure:6784: checking for C++ compiler version
>configure:6787: CC --version </dev/null >&5
>CC (GCC) 3.3.1 (cygming special)
>Copyright (C) 2003 Free Software Foundation, Inc.
>This is free software; see the source for copying conditions. There is NO
>warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
>configure:6790: $? = 0
>configure:6792: CC -v </dev/null >&5
>Reading specs from /usr/lib/gcc-lib/i686-pc-cygwin/3.3.1/specs
>Configured with: /GCC/gcc-3.3.1-3/configure --with-gcc --with-gnu-ld --with-gnu-as --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --libdir=/usr/lib --libexecdir=/usr/sbin --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,f77,pascal,java,objc --enable-libgcj --enable-threads=posix --with-system-zlib --enable-nls --without-included-gettext --enable-interpreter --enable-sjlj-exceptions --disable-version-specific-runtime-libs --enable-shared --disable-win32-registry --enable-java-gc=boehm --disable-hash-synchronization --verbose --target=i686-pc-cygwin --host=i686-pc-cygwin --build=i686-pc-cygwin
>Thread model: posix
>gcc version 3.3.1 (cygming special)
>configure:6795: $? = 0
>configure:6797: CC -V </dev/null >&5
>CC: `-V' option must have argument
>configure:6800: $? = 1
>configure:6803: checking whether we are using the GNU C++ compiler
>configure:6827: CC -c -DLAM_BUILDING=1 conftest.cc >&5
>configure:6833: $? = 0
>configure:6837: test -z
> || test ! -s conftest.err
>configure:6840: $? = 0
>configure:6843: test -s conftest.o
>configure:6846: $? = 0
>configure:6859: result: yes
>configure:6865: checking whether CC accepts -g
>configure:6886: CC -c -g -DLAM_BUILDING=1 conftest.cc >&5
>configure:6892: $? = 0
>configure:6896: test -z
> || test ! -s conftest.err
>configure:6899: $? = 0
>configure:6902: test -s conftest.o
>configure:6905: $? = 0
>configure:6916: result: yes
>configure:6958: CC -c -g -O2 -DLAM_BUILDING=1 conftest.cc >&5
>configure:6964: $? = 0
>configure:6968: test -z
> || test ! -s conftest.err
>configure:6971: $? = 0
>configure:6974: test -s conftest.o
>configure:6977: $? = 0
>configure:7003: CC -c -g -O2 -DLAM_BUILDING=1 conftest.cc >&5
>conftest.cc: In function `int main()':
>conftest.cc:53: error: `exit' undeclared (first use this function)
>conftest.cc:53: error: (Each undeclared identifier is reported only once for
> each function it appears in.)
>configure:7009: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| /* end confdefs.h. */
>|
>| int
>| main ()
>| {
>| exit (42);
>| ;
>| return 0;
>| }
>configure:6958: CC -c -g -O2 -DLAM_BUILDING=1 conftest.cc >&5
>configure:6964: $? = 0
>configure:6968: test -z
> || test ! -s conftest.err
>configure:6971: $? = 0
>configure:6974: test -s conftest.o
>configure:6977: $? = 0
>configure:7003: CC -c -g -O2 -DLAM_BUILDING=1 conftest.cc >&5
>configure:7009: $? = 0
>configure:7013: test -z
> || test ! -s conftest.err
>configure:7016: $? = 0
>configure:7019: test -s conftest.o
>configure:7022: $? = 0
>configure:7047: checking dependency style of CC
>configure:7130: result: gcc3
>configure:7152: checking how to run the C++ preprocessor
>configure:7183: CC -E -DLAM_BUILDING=1 conftest.cc
>configure:7189: $? = 0
>configure:7221: CC -E -DLAM_BUILDING=1 conftest.cc
>conftest.cc:52:28: ac_nonexistent.h: No such file or directory
>configure:7227: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| /* end confdefs.h. */
>| #include <ac_nonexistent.h>
>configure:7266: result: CC -E
>configure:7290: CC -E -DLAM_BUILDING=1 conftest.cc
>configure:7296: $? = 0
>configure:7328: CC -E -DLAM_BUILDING=1 conftest.cc
>conftest.cc:52:28: ac_nonexistent.h: No such file or directory
>configure:7334: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| /* end confdefs.h. */
>| #include <ac_nonexistent.h>
>configure:7544: checking if want C++ exception handling
>configure:7546: result: no
>configure:7832: checking whether CC has new(std::nothrow)
>configure:7845: CC conftest.cc -o conftest
>/cygdrive/c/DOCUME~1/e176/LOCALS~1/Temp/cceVhssw.o(.text+0x29):conftest.cc: undefined reference to `std::nothrow'
>/cygdrive/c/DOCUME~1/e176/LOCALS~1/Temp/cceVhssw.o(.text+0x35):conftest.cc: undefined reference to `operator new(unsigned, std::nothrow_t const&)'
>/cygdrive/c/DOCUME~1/e176/LOCALS~1/Temp/cceVhssw.o(.text+0x40):conftest.cc: undefined reference to `std::nothrow'
>/cygdrive/c/DOCUME~1/e176/LOCALS~1/Temp/cceVhssw.o(.text+0x4f):conftest.cc: undefined reference to `operator new[](unsigned, std::nothrow_t const&)'
>collect2: ld returned 1 exit status
>configure:7853: here is the program that failed:
>#include <new>
>
>int main(int argc, char* argv) {
> int *baz;
> unsigned int foo = 3;
> baz = new(std::nothrow) int;
> baz = new(std::nothrow) int[foo - 1];
>}
>configure:7857: result: no
>configure:7902: checking for C++ template repository directory
>configure:7961: CC -c conftest1.C
>configure:7972: CC -c conftest2.C
>configure:8023: result: not used
>configure:8048: checking for C++ compiler template parameters
>configure:8056: result: none needed
>configure:8147: checking for C++ optimization flags
>configure:8149: result: -O3
>configure:8183: checking for ANSI C header files
>configure:8208: CC -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8214: $? = 0
>configure:8218: test -z
> || test ! -s conftest.err
>configure:8221: $? = 0
>configure:8224: test -s conftest.o
>configure:8227: $? = 0
>configure:8313: CC -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8316: $? = 0
>configure:8318: ./conftest.exe
>configure:8321: $? = 0
>configure:8336: result: yes
>configure:8360: checking for sys/types.h
>configure:8376: CC -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8382: $? = 0
>configure:8386: test -z
> || test ! -s conftest.err
>configure:8389: $? = 0
>configure:8392: test -s conftest.o
>configure:8395: $? = 0
>configure:8406: result: yes
>configure:8360: checking for sys/stat.h
>configure:8376: CC -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8382: $? = 0
>configure:8386: test -z
> || test ! -s conftest.err
>configure:8389: $? = 0
>configure:8392: test -s conftest.o
>configure:8395: $? = 0
>configure:8406: result: yes
>configure:8360: checking for stdlib.h
>configure:8376: CC -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8382: $? = 0
>configure:8386: test -z
> || test ! -s conftest.err
>configure:8389: $? = 0
>configure:8392: test -s conftest.o
>configure:8395: $? = 0
>configure:8406: result: yes
>configure:8360: checking for string.h
>configure:8376: CC -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8382: $? = 0
>configure:8386: test -z
> || test ! -s conftest.err
>configure:8389: $? = 0
>configure:8392: test -s conftest.o
>configure:8395: $? = 0
>configure:8406: result: yes
>configure:8360: checking for memory.h
>configure:8376: CC -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8382: $? = 0
>configure:8386: test -z
> || test ! -s conftest.err
>configure:8389: $? = 0
>configure:8392: test -s conftest.o
>configure:8395: $? = 0
>configure:8406: result: yes
>configure:8360: checking for strings.h
>configure:8376: CC -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8382: $? = 0
>configure:8386: test -z
> || test ! -s conftest.err
>configure:8389: $? = 0
>configure:8392: test -s conftest.o
>configure:8395: $? = 0
>configure:8406: result: yes
>configure:8360: checking for inttypes.h
>configure:8376: CC -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8382: $? = 0
>configure:8386: test -z
> || test ! -s conftest.err
>configure:8389: $? = 0
>configure:8392: test -s conftest.o
>configure:8395: $? = 0
>configure:8406: result: yes
>configure:8360: checking for stdint.h
>configure:8376: CC -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8382: $? = 0
>configure:8386: test -z
> || test ! -s conftest.err
>configure:8389: $? = 0
>configure:8392: test -s conftest.o
>configure:8395: $? = 0
>configure:8406: result: yes
>configure:8360: checking for unistd.h
>configure:8376: CC -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8382: $? = 0
>configure:8386: test -z
> || test ! -s conftest.err
>configure:8389: $? = 0
>configure:8392: test -s conftest.o
>configure:8395: $? = 0
>configure:8406: result: yes
>configure:8428: checking map usability
>configure:8440: CC -c -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8446: $? = 0
>configure:8450: test -z
> || test ! -s conftest.err
>configure:8453: $? = 0
>configure:8456: test -s conftest.o
>configure:8459: $? = 0
>configure:8469: result: yes
>configure:8473: checking map presence
>configure:8483: CC -E -DLAM_BUILDING=1 conftest.cc
>configure:8489: $? = 0
>configure:8509: result: yes
>configure:8544: checking for map
>configure:8551: result: yes
>configure:8614: checking for type bool
>configure:8630: CC -O3 conftest.cc -o conftest
>configure:8631: result: yes
>configure:8688: checking for true/false
>configure:8706: CC -O3 conftest.cc -o conftest
>configure:8707: result: yes
>configure:8757: checking size of bool
>configure:8780: CC -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8783: $? = 0
>configure:8785: ./conftest.exe
>configure:8788: $? = 0
>configure:8802: result: 1
>configure:8845: checking size of int
>configure:8868: CC -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8871: $? = 0
>configure:8873: ./conftest.exe
>configure:8876: $? = 0
>configure:8890: result: 4
>configure:8937: checking alignment of bool
>configure:8966: CC -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:8969: $? = 0
>configure:8971: ./conftest.exe
>configure:8974: $? = 0
>configure:8998: result: 1
>configure:9029: checking alignment of int
>configure:9058: CC -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.cc >&5
>configure:9061: $? = 0
>configure:9063: ./conftest.exe
>configure:9066: $? = 0
>configure:9090: result: 4
>configure:9114: checking how to store bool in C
>configure:9134: result: unsigned char
>configure:9202: checking for f77
>configure:9218: found /usr/bin/f77
>configure:9228: result: f77
>configure:9332: checking how to add a library directory to f77
>configure:9337: result: "-L"
>configure:9348: checking f77 external naming convention
>configure:9364: result: FORTRANDOUBLEUNDERSCORE
>configure:9478: checking for FORTRAN optimization flags
>configure:9480: result: -O
>configure:9492: checking size of FORTRAN INTEGER
>configure:9571: cc -O3 -I. -c conftest.c
>configure:9578: $? = 0
>configure:9588: f77 -O conftestf.f conftest.o -o conftest
>configure:9595: $? = 0
>configure:9605: ./conftest
>configure:9612: $? = 0
>configure:9631: result: 4
>configure:9696: checking size of FORTRAN REAL
>configure:9775: cc -O3 -I. -c conftest.c
>configure:9782: $? = 0
>configure:9792: f77 -O conftestf.f conftest.o -o conftest
>configure:9799: $? = 0
>configure:9809: ./conftest
>configure:9816: $? = 0
>configure:9835: result: 4
>configure:9900: checking size of FORTRAN DOUBLE PRECISION
>configure:9979: cc -O3 -I. -c conftest.c
>configure:9986: $? = 0
>configure:9996: f77 -O conftestf.f conftest.o -o conftest
>configure:10003: $? = 0
>configure:10013: ./conftest
>configure:10020: $? = 0
>configure:10039: result: 8
>configure:10104: checking size of FORTRAN COMPLEX
>configure:10183: cc -O3 -I. -c conftest.c
>configure:10190: $? = 0
>configure:10200: f77 -O conftestf.f conftest.o -o conftest
>configure:10207: $? = 0
>configure:10217: ./conftest
>configure:10224: $? = 0
>configure:10243: result: 8
>configure:10308: checking size of FORTRAN DOUBLE COMPLEX
>configure:10387: cc -O3 -I. -c conftest.c
>configure:10394: $? = 0
>configure:10404: f77 -O conftestf.f conftest.o -o conftest
>configure:10411: $? = 0
>configure:10421: ./conftest
>configure:10428: $? = 0
>configure:10447: result: 16
>configure:10518: checking alignment of FORTRAN INTEGER
>configure:10603: cc -O3 -I. -c conftest.c
>configure:10610: $? = 0
>configure:10620: f77 -O conftestf.f conftest.o -o conftest
>conftestf.f: In program `falign':
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Padding of 3 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Padding of 3 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Initial padding for common block `foo' is 3 bytes at (^) -- consider reordering members, largest-type-size first
>configure:10627: $? = 0
>configure:10637: ./conftest
>configure:10644: $? = 0
>configure:10663: result: 4
>configure:10728: checking alignment of FORTRAN REAL
>configure:10813: cc -O3 -I. -c conftest.c
>configure:10820: $? = 0
>configure:10830: f77 -O conftestf.f conftest.o -o conftest
>conftestf.f: In program `falign':
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Padding of 3 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Padding of 3 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Initial padding for common block `foo' is 3 bytes at (^) -- consider reordering members, largest-type-size first
>configure:10837: $? = 0
>configure:10847: ./conftest
>configure:10854: $? = 0
>configure:10873: result: 4
>configure:10938: checking alignment of FORTRAN DOUBLE PRECISION
>configure:11023: cc -O3 -I. -c conftest.c
>configure:11030: $? = 0
>configure:11040: f77 -O conftestf.f conftest.o -o conftest
>conftestf.f: In program `falign':
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Padding of 7 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Padding of 7 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Initial padding for common block `foo' is 7 bytes at (^) -- consider reordering members, largest-type-size first
>configure:11047: $? = 0
>configure:11057: ./conftest
>configure:11064: $? = 0
>configure:11083: result: 8
>configure:11148: checking alignment of FORTRAN COMPLEX
>configure:11233: cc -O3 -I. -c conftest.c
>configure:11240: $? = 0
>configure:11250: f77 -O conftestf.f conftest.o -o conftest
>conftestf.f: In program `falign':
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Padding of 3 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Padding of 3 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Initial padding for common block `foo' is 3 bytes at (^) -- consider reordering members, largest-type-size first
>configure:11257: $? = 0
>configure:11267: ./conftest
>configure:11274: $? = 0
>configure:11293: result: 4
>configure:11358: checking alignment of FORTRAN DOUBLE COMPLEX
>configure:11443: cc -O3 -I. -c conftest.c
>configure:11450: $? = 0
>configure:11460: f77 -O conftestf.f conftest.o -o conftest
>conftestf.f: In program `falign':
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Padding of 7 bytes required before `x' in common block `foo' at (^) -- consider reordering members, largest-type-size first
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Padding of 7 bytes required before `z' in common block `foo' at (^) -- consider reordering members, largest-type-size first
>conftestf.f:5: warning:
> common /foo/a,w,b,x,y,c,z
> ^
>Initial padding for common block `foo' is 7 bytes at (^) -- consider reordering members, largest-type-size first
>configure:11467: $? = 0
>configure:11477: ./conftest
>configure:11484: $? = 0
>configure:11503: result: 8
>configure:11705: checking if want profiling interface
>configure:11707: result: yes
>configure:11747: checking if want full installation of Trillium files
>configure:11749: result: no
>configure:11806: checking if want ROMIO support
>configure:11808: result: no
>configure:11969: checking if want FORTRAN support
>configure:11998: result: yes
>configure:12028: checking if want MPI 2 C++ support
>configure:12030: result: yes
>configure:12069: checking if want MPI::File C++ binding support
>configure:12071: result: no
>configure:12114: checking if want IMPI support
>configure:12116: result: no
>configure:12277: checking how to yeild
>configure:12294: result: yield()
>configure:12309: checking for LAM user signal
>configure:12328: result: SIGUSR2
>configure:12340: checking if want purify clean
>configure:12362: result: no
>configure:12396: checking for desired boot timeout
>configure:12398: result: 60 seconds
>configure:12400: checking for desired lamd packet resend time
>configure:12402: result: 500000 seconds
>configure:12404: checking for desired lamd heartbeat time
>configure:12406: result: 120 seconds
>configure:12438: checking if want stub MPI functions
>configure:12440: result: no
>configure:12481: checking if want default promiscuous boot connections
>configure:12483: result: no
>configure:12513: checking whether ln -s works
>configure:12517: result: yes
>configure:12532: checking for cp
>configure:12550: found /usr/bin/cp
>configure:12562: result: /usr/bin/cp
>configure:12577: checking for rm
>configure:12595: found /usr/bin/rm
>configure:12607: result: /usr/bin/rm
>configure:12627: checking for sh
>configure:12645: found /usr/bin/sh
>configure:12657: result: /usr/bin/sh
>configure:12673: checking if installed perl can support mpiexec
>configure:12692: result: yes
>configure:12704: checking for prototype of snprintf
>configure:12729: cc -E -O3 conftest.c
>configure:12739: $? = 0
>configure:12748: ...some ugly egrepping...
>configure:12758: $? = 0
>configure:12767: ...some ugly egrepping...
>configure:12777: $? = 0
>configure:12786: result: yes
>configure:12802: checking for prototype of gethostname
>configure:12827: cc -E -O3 conftest.c
>configure:12837: $? = 0
>configure:12846: ...some ugly egrepping...
>configure:12856: $? = 0
>configure:12865: ...some ugly egrepping...
>configure:12875: $? = 0
>configure:12884: result: yes
>configure:12923: checking stropts.h usability
>configure:12935: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>conftest.c:144:21: stropts.h: No such file or directory
>configure:12941: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #include <sys/types.h>
>| /* end confdefs.h. */
>| #include <stdio.h>
>| #if HAVE_SYS_TYPES_H
>| # include <sys/types.h>
>| #endif
>| #if HAVE_SYS_STAT_H
>| # include <sys/stat.h>
>| #endif
>| #if STDC_HEADERS
>| # include <stdlib.h>
>| # include <stddef.h>
>| #else
>| # if HAVE_STDLIB_H
>| # include <stdlib.h>
>| # endif
>| #endif
>| #if HAVE_STRING_H
>| # if !STDC_HEADERS && HAVE_MEMORY_H
>| # include <memory.h>
>| # endif
>| # include <string.h>
>| #endif
>| #if HAVE_STRINGS_H
>| # include <strings.h>
>| #endif
>| #if HAVE_INTTYPES_H
>| # include <inttypes.h>
>| #else
>| # if HAVE_STDINT_H
>| # include <stdint.h>
>| # endif
>| #endif
>| #if HAVE_UNISTD_H
>| # include <unistd.h>
>| #endif
>| #include <stropts.h>
>configure:12964: result: no
>configure:12968: checking stropts.h presence
>configure:12978: cc -E -DLAM_BUILDING=1 conftest.c
>conftest.c:110:21: stropts.h: No such file or directory
>configure:12984: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #include <sys/types.h>
>| /* end confdefs.h. */
>| #include <stropts.h>
>configure:13004: result: no
>configure:13039: checking for stropts.h
>configure:13046: result: no
>configure:12923: checking grp.h usability
>configure:12935: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:12941: $? = 0
>configure:12945: test -z
> || test ! -s conftest.err
>configure:12948: $? = 0
>configure:12951: test -s conftest.o
>configure:12954: $? = 0
>configure:12964: result: yes
>configure:12968: checking grp.h presence
>configure:12978: cc -E -DLAM_BUILDING=1 conftest.c
>configure:12984: $? = 0
>configure:13004: result: yes
>configure:13039: checking for grp.h
>configure:13046: result: yes
>configure:12923: checking netinet/tcp.h usability
>configure:12935: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:12941: $? = 0
>configure:12945: test -z
> || test ! -s conftest.err
>configure:12948: $? = 0
>configure:12951: test -s conftest.o
>configure:12954: $? = 0
>configure:12964: result: yes
>configure:12968: checking netinet/tcp.h presence
>configure:12978: cc -E -DLAM_BUILDING=1 conftest.c
>configure:12984: $? = 0
>configure:13004: result: yes
>configure:13039: checking for netinet/tcp.h
>configure:13046: result: yes
>configure:12923: checking sys/select.h usability
>configure:12935: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:12941: $? = 0
>configure:12945: test -z
> || test ! -s conftest.err
>configure:12948: $? = 0
>configure:12951: test -s conftest.o
>configure:12954: $? = 0
>configure:12964: result: yes
>configure:12968: checking sys/select.h presence
>configure:12978: cc -E -DLAM_BUILDING=1 conftest.c
>configure:12984: $? = 0
>configure:13004: result: yes
>configure:13039: checking for sys/select.h
>configure:13046: result: yes
>configure:12923: checking sys/resource.h usability
>configure:12935: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:12941: $? = 0
>configure:12945: test -z
> || test ! -s conftest.err
>configure:12948: $? = 0
>configure:12951: test -s conftest.o
>configure:12954: $? = 0
>configure:12964: result: yes
>configure:12968: checking sys/resource.h presence
>configure:12978: cc -E -DLAM_BUILDING=1 conftest.c
>configure:12984: $? = 0
>configure:13004: result: yes
>configure:13039: checking for sys/resource.h
>configure:13046: result: yes
>configure:13073: checking rpc/types.h usability
>configure:13085: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:13091: $? = 0
>configure:13095: test -z
> || test ! -s conftest.err
>configure:13098: $? = 0
>configure:13101: test -s conftest.o
>configure:13104: $? = 0
>configure:13114: result: yes
>configure:13118: checking rpc/types.h presence
>configure:13128: cc -E -DLAM_BUILDING=1 conftest.c
>configure:13134: $? = 0
>configure:13154: result: yes
>configure:13189: checking for rpc/types.h
>configure:13196: result: yes
>configure:13213: checking for rpc/xdr.h
>configure:13232: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:13238: $? = 0
>configure:13242: test -z
> || test ! -s conftest.err
>configure:13245: $? = 0
>configure:13248: test -s conftest.o
>configure:13251: $? = 0
>configure:13262: result: yes
>configure:13288: checking pty.h usability
>configure:13300: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:13306: $? = 0
>configure:13310: test -z
> || test ! -s conftest.err
>configure:13313: $? = 0
>configure:13316: test -s conftest.o
>configure:13319: $? = 0
>configure:13329: result: yes
>configure:13333: checking pty.h presence
>configure:13343: cc -E -DLAM_BUILDING=1 conftest.c
>configure:13349: $? = 0
>configure:13369: result: yes
>configure:13404: checking for pty.h
>configure:13411: result: yes
>configure:13288: checking util.h usability
>configure:13300: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>conftest.c:151:18: util.h: No such file or directory
>configure:13306: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #include <sys/types.h>
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| /* end confdefs.h. */
>| #include <stdio.h>
>| #if HAVE_SYS_TYPES_H
>| # include <sys/types.h>
>| #endif
>| #if HAVE_SYS_STAT_H
>| # include <sys/stat.h>
>| #endif
>| #if STDC_HEADERS
>| # include <stdlib.h>
>| # include <stddef.h>
>| #else
>| # if HAVE_STDLIB_H
>| # include <stdlib.h>
>| # endif
>| #endif
>| #if HAVE_STRING_H
>| # if !STDC_HEADERS && HAVE_MEMORY_H
>| # include <memory.h>
>| # endif
>| # include <string.h>
>| #endif
>| #if HAVE_STRINGS_H
>| # include <strings.h>
>| #endif
>| #if HAVE_INTTYPES_H
>| # include <inttypes.h>
>| #else
>| # if HAVE_STDINT_H
>| # include <stdint.h>
>| # endif
>| #endif
>| #if HAVE_UNISTD_H
>| # include <unistd.h>
>| #endif
>| #include <util.h>
>configure:13329: result: no
>configure:13333: checking util.h presence
>configure:13343: cc -E -DLAM_BUILDING=1 conftest.c
>conftest.c:117:18: util.h: No such file or directory
>configure:13349: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #include <sys/types.h>
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| /* end confdefs.h. */
>| #include <util.h>
>configure:13369: result: no
>configure:13404: checking for util.h
>configure:13411: result: no
>configure:13444: checking sched.h usability
>configure:13456: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:13462: $? = 0
>configure:13466: test -z
> || test ! -s conftest.err
>configure:13469: $? = 0
>configure:13472: test -s conftest.o
>configure:13475: $? = 0
>configure:13485: result: yes
>configure:13489: checking sched.h presence
>configure:13499: cc -E -DLAM_BUILDING=1 conftest.c
>configure:13505: $? = 0
>configure:13525: result: yes
>configure:13560: checking for sched.h
>configure:13567: result: yes
>configure:13435: checking for strings.h
>configure:13440: result: yes
>configure:13604: checking if FIONBIO defined in sys/ioctl.h
>configure:13639: result: not on AIX 4.3.3, so who cares?
>configure:13646: checking if SA_RESTART defined in signal.h
>configure:13673: result: yes
>configure:13676: checking for sa_len in struct sockaddr
>configure:13695: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>conftest.c: In function `main':
>conftest.c:125: error: structure has no member named `sa_len'
>configure:13701: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| /* end confdefs.h. */
>| #include <sys/types.h>
>| #include <sys/socket.h>
>| int
>| main ()
>| {
>| struct sockaddr s; s.sa_len;
>| ;
>| return 0;
>| }
>configure:13729: result: no
>configure:13732: checking for union semun in sys/sem.h
>configure:13751: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>conftest.c: In function `main':
>conftest.c:126: error: storage size of `s' isn't known
>configure:13757: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| /* end confdefs.h. */
>| #include <sys/types.h>
>| #include <sys/sem.h>
>| int
>| main ()
>| {
>| union semun s; s.val;
>| ;
>| return 0;
>| }
>configure:13785: result: no
>configure:13788: checking if need to include sys/select.h
>configure:13807: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:13813: $? = 0
>configure:13817: test -z
> || test ! -s conftest.err
>configure:13820: $? = 0
>configure:13823: test -s conftest.o
>configure:13826: $? = 0
>configure:13841: result: yes
>configure:13856: checking for socket
>configure:13913: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:13919: $? = 0
>configure:13923: test -z
> || test ! -s conftest.err
>configure:13926: $? = 0
>configure:13929: test -s conftest.exe
>configure:13932: $? = 0
>configure:13944: result: yes
>configure:14024: checking for gethostbyname
>configure:14081: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:14087: $? = 0
>configure:14091: test -z
> || test ! -s conftest.err
>configure:14094: $? = 0
>configure:14097: test -s conftest.exe
>configure:14100: $? = 0
>configure:14112: result: yes
>configure:14200: checking for login in -lutil
>configure:14230: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c -lutil >&5
>configure:14236: $? = 0
>configure:14240: test -z
> || test ! -s conftest.err
>configure:14243: $? = 0
>configure:14246: test -s conftest.exe
>configure:14249: $? = 0
>configure:14262: result: yes
>configure:14275: checking for openpty
>configure:14332: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c -lutil >&5
>configure:14338: $? = 0
>configure:14342: test -z
> || test ! -s conftest.err
>configure:14345: $? = 0
>configure:14348: test -s conftest.exe
>configure:14351: $? = 0
>configure:14363: result: yes
>configure:14401: checking for atexit
>configure:14458: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:14464: $? = 0
>configure:14468: test -z
> || test ! -s conftest.err
>configure:14471: $? = 0
>configure:14474: test -s conftest.exe
>configure:14477: $? = 0
>configure:14489: result: yes
>configure:14518: checking for getcwd
>configure:14575: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:14581: $? = 0
>configure:14585: test -z
> || test ! -s conftest.err
>configure:14588: $? = 0
>configure:14591: test -s conftest.exe
>configure:14594: $? = 0
>configure:14606: result: yes
>configure:14635: checking for yield
>configure:14692: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>/cygdrive/c/DOCUME~1/e176/LOCALS~1/Temp/ccyaig87.o(.text+0x1d):conftest.c: undefined reference to `_yield'
>/cygdrive/c/DOCUME~1/e176/LOCALS~1/Temp/ccyaig87.o(.data+0x0):conftest.c: undefined reference to `_yield'
>collect2: ld returned 1 exit status
>configure:14698: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| #define LAM_HAVE_UNION_SEMUN 0
>| #define LAM_NEED_SYS_SELECT_H 1
>| #define LAM_HAVE_OPENPTY 1
>| #define LAM_HAVE_ATEXIT 1
>| #define LAM_HAVE_GETCWD 1
>| /* end confdefs.h. */
>| /* Define yield to an innocuous variant, in case <limits.h> declares yield.
>| For example, HP-UX 11i <limits.h> declares gettimeofday. */
>| #define yield innocuous_yield
>|
>| /* System header to define __stub macros and hopefully few prototypes,
>| which can conflict with char yield (); below.
>| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
>| <limits.h> exists even on freestanding compilers. */
>|
>| #ifdef __STDC__
>| # include <limits.h>
>| #else
>| # include <assert.h>
>| #endif
>|
>| #undef yield
>|
>| /* Override any gcc2 internal prototype to avoid an error. */
>| #ifdef __cplusplus
>| extern "C"
>| {
>| #endif
>| /* We use char because int might match the return type of a gcc2
>| builtin and then its argument prototype would still apply. */
>| char yield ();
>| /* The GNU C library defines this for functions which it implements
>| to always fail with ENOSYS. Some functions are actually named
>| something starting with __ and the normal name is an alias. */
>| #if defined (__stub_yield) || defined (__stub___yield)
>| choke me
>| #else
>| char (*f) () = yield;
>| #endif
>| #ifdef __cplusplus
>| }
>| #endif
>|
>| int
>| main ()
>| {
>| return f != yield;
>| ;
>| return 0;
>| }
>configure:14723: result: no
>configure:14752: checking for snprintf
>configure:14809: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>conftest.c:151: warning: conflicting types for built-in function `snprintf'
>configure:14815: $? = 0
>configure:14819: test -z
> || test ! -s conftest.err
>configure:14822: $? = 0
>configure:14825: test -s conftest.exe
>configure:14828: $? = 0
>configure:14840: result: yes
>configure:14869: checking for atoll
>configure:14926: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>/cygdrive/c/DOCUME~1/e176/LOCALS~1/Temp/cc8ZDcLy.o(.text+0x1d):conftest.c: undefined reference to `_atoll'
>/cygdrive/c/DOCUME~1/e176/LOCALS~1/Temp/cc8ZDcLy.o(.data+0x0):conftest.c: undefined reference to `_atoll'
>collect2: ld returned 1 exit status
>configure:14932: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| #define LAM_HAVE_UNION_SEMUN 0
>| #define LAM_NEED_SYS_SELECT_H 1
>| #define LAM_HAVE_OPENPTY 1
>| #define LAM_HAVE_ATEXIT 1
>| #define LAM_HAVE_GETCWD 1
>| #define LAM_HAVE_YIELD 0
>| #define LAM_HAVE_SNPRINTF 1
>| /* end confdefs.h. */
>| /* Define atoll to an innocuous variant, in case <limits.h> declares atoll.
>| For example, HP-UX 11i <limits.h> declares gettimeofday. */
>| #define atoll innocuous_atoll
>|
>| /* System header to define __stub macros and hopefully few prototypes,
>| which can conflict with char atoll (); below.
>| Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
>| <limits.h> exists even on freestanding compilers. */
>|
>| #ifdef __STDC__
>| # include <limits.h>
>| #else
>| # include <assert.h>
>| #endif
>|
>| #undef atoll
>|
>| /* Override any gcc2 internal prototype to avoid an error. */
>| #ifdef __cplusplus
>| extern "C"
>| {
>| #endif
>| /* We use char because int might match the return type of a gcc2
>| builtin and then its argument prototype would still apply. */
>| char atoll ();
>| /* The GNU C library defines this for functions which it implements
>| to always fail with ENOSYS. Some functions are actually named
>| something starting with __ and the normal name is an alias. */
>| #if defined (__stub_atoll) || defined (__stub___atoll)
>| choke me
>| #else
>| char (*f) () = atoll;
>| #endif
>| #ifdef __cplusplus
>| }
>| #endif
>|
>| int
>| main ()
>| {
>| return f != atoll;
>| ;
>| return 0;
>| }
>configure:14957: result: no
>configure:14986: checking for strtoll
>configure:15043: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:15049: $? = 0
>configure:15053: test -z
> || test ! -s conftest.err
>configure:15056: $? = 0
>configure:15059: test -s conftest.exe
>configure:15062: $? = 0
>configure:15074: result: yes
>configure:15103: checking for sched_yield
>configure:15160: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:15166: $? = 0
>configure:15170: test -z
> || test ! -s conftest.err
>configure:15173: $? = 0
>configure:15176: test -s conftest.exe
>configure:15179: $? = 0
>configure:15191: result: yes
>configure:15216: checking whether vscanf is declared
>configure:15240: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:15246: $? = 0
>configure:15250: test -z
> || test ! -s conftest.err
>configure:15253: $? = 0
>configure:15256: test -s conftest.o
>configure:15259: $? = 0
>configure:15270: result: yes
>configure:15286: checking whether va_copy is declared
>configure:15311: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:15317: $? = 0
>configure:15321: test -z
> || test ! -s conftest.err
>configure:15324: $? = 0
>configure:15327: test -s conftest.o
>configure:15330: $? = 0
>configure:15341: result: yes
>configure:15355: checking whether __va_copy is declared
>configure:15380: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:15386: $? = 0
>configure:15390: test -z
> || test ! -s conftest.err
>configure:15393: $? = 0
>configure:15396: test -s conftest.o
>configure:15399: $? = 0
>configure:15410: result: yes
>configure:15460: checking for glibc
>configure:15491: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:15494: $? = 0
>configure:15496: ./conftest.exe
>configure:15499: $? = 0
>configure:15515: result: no
>configure:15522: checking whether to use prefix memcpy()
>configure:15565: result: no (default on non-glibc systems: no)
>configure:15573: checking whether byte ordering is bigendian
>configure:15600: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:15606: $? = 0
>configure:15610: test -z
> || test ! -s conftest.err
>configure:15613: $? = 0
>configure:15616: test -s conftest.o
>configure:15619: $? = 0
>configure:15643: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>conftest.c: In function `main':
>conftest.c:142: error: `not' undeclared (first use in this function)
>conftest.c:142: error: (Each undeclared identifier is reported only once
>conftest.c:142: error: for each function it appears in.)
>conftest.c:142: error: syntax error before "big"
>configure:15649: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| #define LAM_HAVE_UNION_SEMUN 0
>| #define LAM_NEED_SYS_SELECT_H 1
>| #define LAM_HAVE_OPENPTY 1
>| #define LAM_HAVE_ATEXIT 1
>| #define LAM_HAVE_GETCWD 1
>| #define LAM_HAVE_YIELD 0
>| #define LAM_HAVE_SNPRINTF 1
>| #define LAM_HAVE_ATOLL 0
>| #define LAM_HAVE_STRTOLL 1
>| #define LAM_HAVE_SCHED_YIELD 1
>| #define LAM_HAVE_VSCANF 1
>| #define LAM_HAVE_VA_COPY 1
>| #define LAM_HAVE_UNDERSCORE_VA_COPY 1
>| #define LAM_WANT_PREFIX_MEMCPY 0
>| /* end confdefs.h. */
>| #include <sys/types.h>
>| #include <sys/param.h>
>|
>| int
>| main ()
>| {
>| #if BYTE_ORDER != BIG_ENDIAN
>| not big endian
>| #endif
>|
>| ;
>| return 0;
>| }
>configure:15784: result: no
>configure:15838: checking for struct semid_ds
>configure:15859: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:15865: $? = 0
>configure:15869: test -z
> || test ! -s conftest.err
>configure:15872: $? = 0
>configure:15875: test -s conftest.o
>configure:15878: $? = 0
>configure:15888: result: yes
>configure:15898: checking if SYSV semaphores work
>configure:15935: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c >&5
>/cygdrive/c/DOCUME~1/e176/LOCALS~1/Temp/ccYFcsNE.o(.text+0x35):conftest.c: undefined reference to `_semget'
>/cygdrive/c/DOCUME~1/e176/LOCALS~1/Temp/ccYFcsNE.o(.text+0x52):conftest.c: undefined reference to `_semctl'
>collect2: ld returned 1 exit status
>configure:15938: $? = 1
>configure: program exited with status 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| #define LAM_HAVE_UNION_SEMUN 0
>| #define LAM_NEED_SYS_SELECT_H 1
>| #define LAM_HAVE_OPENPTY 1
>| #define LAM_HAVE_ATEXIT 1
>| #define LAM_HAVE_GETCWD 1
>| #define LAM_HAVE_YIELD 0
>| #define LAM_HAVE_SNPRINTF 1
>| #define LAM_HAVE_ATOLL 0
>| #define LAM_HAVE_STRTOLL 1
>| #define LAM_HAVE_SCHED_YIELD 1
>| #define LAM_HAVE_VSCANF 1
>| #define LAM_HAVE_VA_COPY 1
>| #define LAM_HAVE_UNDERSCORE_VA_COPY 1
>| #define LAM_WANT_PREFIX_MEMCPY 0
>| /* end confdefs.h. */
>| #include <sys/types.h>
>| #include <sys/sem.h>
>| #include <sys/ipc.h>
>| #include <stdlib.h>
>|
>| int main(int argc, char **argv){
>| int semid;
>| /* Create a private semaphore set */
>| semid = semget (IPC_PRIVATE, 1, 0777);
>| /* If successful try to release it */
>| if( semid == -1 || semctl(semid, 0, IPC_RMID) == -1 ){
>| exit(3); /* one of them failed */
>| }
>| return 0; /* semget() and semctl() work */
>| }
>configure:15964: result: no
>configure:15970: checking if SYSV semaphores work with -lrt
>configure:16008: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c -lrt >&5
>/usr/lib/gcc-lib/i686-pc-cygwin/3.3.1/../../../../i686-pc-cygwin/bin/ld: cannot find -lrt
>collect2: ld returned 1 exit status
>configure:16011: $? = 1
>configure: program exited with status 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| #define LAM_HAVE_UNION_SEMUN 0
>| #define LAM_NEED_SYS_SELECT_H 1
>| #define LAM_HAVE_OPENPTY 1
>| #define LAM_HAVE_ATEXIT 1
>| #define LAM_HAVE_GETCWD 1
>| #define LAM_HAVE_YIELD 0
>| #define LAM_HAVE_SNPRINTF 1
>| #define LAM_HAVE_ATOLL 0
>| #define LAM_HAVE_STRTOLL 1
>| #define LAM_HAVE_SCHED_YIELD 1
>| #define LAM_HAVE_VSCANF 1
>| #define LAM_HAVE_VA_COPY 1
>| #define LAM_HAVE_UNDERSCORE_VA_COPY 1
>| #define LAM_WANT_PREFIX_MEMCPY 0
>| /* end confdefs.h. */
>| #include <sys/types.h>
>| #include <sys/sem.h>
>| #include <sys/ipc.h>
>| #include <stdlib.h>
>|
>| int main(int argc, char **argv){
>| int semid;
>| /* Create a private semaphore set */
>| semid = semget (IPC_PRIVATE, 1, 0777);
>| /* If successful try to release it */
>| if( semid == -1 || semctl(semid, 0, IPC_RMID) == -1 ){
>| exit(3); /* one of them failed */
>| }
>| return 0; /* semget() and semctl() work */
>| }
>configure:16037: result: no
>configure:15970: checking if SYSV semaphores work with -lcygipc
>configure:16008: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c -lcygipc >&5
>configure:16011: $? = 0
>configure:16013: ./conftest.exe
>configure:16016: $? = 0
>configure:16037: result: yes
>configure:16051: checking for SYSV semaphore support
>configure:16054: result: yes
>configure:16146: checking for struct shmid_ds
>configure:16166: cc -c -O3 -DLAM_BUILDING=1 conftest.c >&5
>configure:16172: $? = 0
>configure:16176: test -z
> || test ! -s conftest.err
>configure:16179: $? = 0
>configure:16182: test -s conftest.o
>configure:16185: $? = 0
>configure:16195: result: yes
>configure:16205: checking if SYSV shared memory works
>configure:16246: cc -o conftest.exe -O3 -DLAM_BUILDING=1 conftest.c -lcygipc >&5
>configure:16249: $? = 0
>configure:16251: ./conftest.exe
>configure:16254: $? = 0
>configure:16275: result: yes
>configure:16366: checking for SYSV shared memory support
>configure:16369: result: yes
>configure:16488: checking if C compiler and POSIX threads work as is
>configure:16547: cc -o conftest.exe -O3 -DLAM_BUILDING=1 -D_REENTRANT conftest.c -lcygipc >&5
>configure:16553: $? = 0
>configure:16557: test -z
> || test ! -s conftest.err
>configure:16560: $? = 0
>configure:16563: test -s conftest.exe
>configure:16566: $? = 0
>configure:16586: result: yes
>configure:16603: checking if C++ compiler and POSIX threads work as is
>configure:16662: CC -o conftest.exe -O3 -DLAM_BUILDING=1 -D_REENTRANT conftest.cc -lcygipc >&5
>configure:16668: $? = 0
>configure:16672: test -z
> || test ! -s conftest.err
>configure:16675: $? = 0
>configure:16678: test -s conftest.exe
>configure:16681: $? = 0
>configure:16701: result: yes
>configure:16718: checking if F77 compiler and POSIX threads work as is
>configure:16793: cc -O3 -I. -c conftest.c
>configure:16800: $? = 0
>configure:16810: f77 -O conftestf.f conftest.o -o conftest -lcygipc
>configure:16817: $? = 0
>configure:16888: result: yes
>configure:17979: checking for working POSIX threads package
>configure:17982: result: yes
>configure:18021: checking if C compiler and Solaris threads work
>configure:18056: cc -o conftest.exe -mt conftest.c >&5
>cc1: error: invalid option `t'
>configure:18062: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| #define LAM_HAVE_UNION_SEMUN 0
>| #define LAM_NEED_SYS_SELECT_H 1
>| #define LAM_HAVE_OPENPTY 1
>| #define LAM_HAVE_ATEXIT 1
>| #define LAM_HAVE_GETCWD 1
>| #define LAM_HAVE_YIELD 0
>| #define LAM_HAVE_SNPRINTF 1
>| #define LAM_HAVE_ATOLL 0
>| #define LAM_HAVE_STRTOLL 1
>| #define LAM_HAVE_SCHED_YIELD 1
>| #define LAM_HAVE_VSCANF 1
>| #define LAM_HAVE_VA_COPY 1
>| #define LAM_HAVE_UNDERSCORE_VA_COPY 1
>| #define LAM_WANT_PREFIX_MEMCPY 0
>| #define LAM_HAVE_SYSV_SEMAPHORES 1
>| #define LAM_HAVE_SYSV_SHMEM 1
>| /* end confdefs.h. */
>| #include <thread.h>
>| int
>| main ()
>| {
>| thread_t th; thr_join(th, 0, 0);
>| thr_create(0,0,0,0,0,0);
>| ;
>| return 0;
>| }
>configure:18098: result: no
>configure:18119: checking if C++ compiler and Solaris threads work
>configure:18150: CC -o conftest.exe -mt conftest.cc >&5
>cc1plus: error: invalid option `t'
>configure:18156: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| #define LAM_HAVE_UNION_SEMUN 0
>| #define LAM_NEED_SYS_SELECT_H 1
>| #define LAM_HAVE_OPENPTY 1
>| #define LAM_HAVE_ATEXIT 1
>| #define LAM_HAVE_GETCWD 1
>| #define LAM_HAVE_YIELD 0
>| #define LAM_HAVE_SNPRINTF 1
>| #define LAM_HAVE_ATOLL 0
>| #define LAM_HAVE_STRTOLL 1
>| #define LAM_HAVE_SCHED_YIELD 1
>| #define LAM_HAVE_VSCANF 1
>| #define LAM_HAVE_VA_COPY 1
>| #define LAM_HAVE_UNDERSCORE_VA_COPY 1
>| #define LAM_WANT_PREFIX_MEMCPY 0
>| #define LAM_HAVE_SYSV_SEMAPHORES 1
>| #define LAM_HAVE_SYSV_SHMEM 1
>| /* end confdefs.h. */
>| #include <thread.h>
>| int
>| main ()
>| {
>| thread_t th; thr_join(th, 0, 0);
>| thr_create(0,0,0,0,0,0);
>| ;
>| return 0;
>| }
>configure:18192: result: no
>configure:18211: checking if F77 compiler and Solaris threads work
>configure:18267: cc -mt -I. -c conftest.c
>cc1: error: invalid option `t'
>configure:18274: $? = 1
>configure:18314: here is the C program:
>#include <stdio.h>
>#include <stdlib.h>
>#include <thread.h>
>
>
>#ifdef __cplusplus
>extern "C" {
>#endif
>void lam_pthread()
>{
> thread_t th;
> thr_join(th, 0, 0);
> thr_create(0,0,0,0,0,0);
>}
>#ifdef __cplusplus
>}
>#endif
>configure:18342: here is the fortran program:
> program fpthread
> INTEGER i
> i = 1
> end
>configure:18365: result: no
>configure:18394: checking for working Solaris threads package
>configure:18400: result: no
>configure:18408: checking for type of thread support
>configure:18473: result: posix
>configure:18537: checking if threads have different pids (pthreads on linux)
>configure:18582: cc -o conftest.exe -O3 -DLAM_BUILDING=1 -D_REENTRANT conftest.c -lcygipc >&5
>configure:18585: $? = 0
>configure:18587: ./conftest.exe
>configure:18590: $? = 0
>configure:18608: result: no
>configure:18730: checking BSD 4.3 for msg_accrights in struct msghdr
>configure:18749: cc -c -O3 -DLAM_BUILDING=1 -D_REENTRANT conftest.c >&5
>configure:18755: $? = 0
>configure:18759: test -z
> || test ! -s conftest.err
>configure:18762: $? = 0
>configure:18765: test -s conftest.o
>configure:18768: $? = 0
>configure:18778: result: yes
>configure:18788: checking BSD 4.3 fd passing example
>configure:18862: cc -o conftest.exe -O3 -DLAM_BUILDING=1 -D_REENTRANT -I. conftest.c -lutil -lcygipc >&5
>configure:18865: $? = 0
>configure:18867: ./conftest.exe
>configure:18870: $? = 1
>configure: program exited with status 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| #define LAM_HAVE_UNION_SEMUN 0
>| #define LAM_NEED_SYS_SELECT_H 1
>| #define LAM_HAVE_OPENPTY 1
>| #define LAM_HAVE_ATEXIT 1
>| #define LAM_HAVE_GETCWD 1
>| #define LAM_HAVE_YIELD 0
>| #define LAM_HAVE_SNPRINTF 1
>| #define LAM_HAVE_ATOLL 0
>| #define LAM_HAVE_STRTOLL 1
>| #define LAM_HAVE_SCHED_YIELD 1
>| #define LAM_HAVE_VSCANF 1
>| #define LAM_HAVE_VA_COPY 1
>| #define LAM_HAVE_UNDERSCORE_VA_COPY 1
>| #define LAM_WANT_PREFIX_MEMCPY 0
>| #define LAM_HAVE_SYSV_SEMAPHORES 1
>| #define LAM_HAVE_SYSV_SHMEM 1
>| #define LAM_HAVE_SOLARIS_THREADS 0
>| #define LAM_HAVE_POSIX_THREADS 1
>| #define LAM_THREADS_HAVE_DIFFERENT_PIDS 0
>| /* end confdefs.h. */
>| #include <sys/types.h>
>| #include <sys/wait.h>
>| #include <sys/socket.h>
>| #include <signal.h>
>| #include <stdio.h>
>| #include <unistd.h>
>|
>| #define LAM_HAVE_BSD43_FD_PASSING 1
>| #include <conftest_fd_include.c>
>|
>| /*
>| * Global so that we can kill the child if the parent barfs
>| */
>| pid_t child_pid = 0;
>|
>| int
>| main(int argc, char *argv[])
>| {
>| int fd[2];
>| int status = 0;
>|
>| if (socketpair(AF_UNIX, SOCK_STREAM, 0, fd)) {
>| perror("pipe");
>| exit(1);
>| }
>|
>| if ((child_pid = fork()) < 0) {
>| perror("fork");
>| } else if (child_pid > 0) {
>| /* I am the parent... */
>| if (sfh_send_fd(fd[0], 0)) {
>| /* Renice? You must mean kill -9. */
>| kill(child_pid, 9);
>| waitpid(child_pid, &status, 0);
>| return (2);
>| }
>| waitpid(child_pid, &status, 0);
>| } else {
>| /* I am the child... */
>| if (sfh_recv_fd(fd[1]) == -1) {
>| exit(3);
>| }
>| }
>| if (WEXITSTATUS(status) == 0){
>| return 0; /*child recieved the fd */
>| }
>| else{
>| return 1;
>| }
>| }
>configure:18885: result: failed
>configure:18898: checking for BSD 4.3 fd passing support
>configure:18900: result: no
>configure:18961: checking for POSIX.1g struct msghdr
>configure:18984: cc -c -O3 -DLAM_BUILDING=1 -D_REENTRANT conftest.c >&5
>conftest.c: In function `main':
>conftest.c:147: error: storage size of `c' isn't known
>conftest.c:150: error: structure has no member named `msg_control'
>configure:18990: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| #define LAM_HAVE_UNION_SEMUN 0
>| #define LAM_NEED_SYS_SELECT_H 1
>| #define LAM_HAVE_OPENPTY 1
>| #define LAM_HAVE_ATEXIT 1
>| #define LAM_HAVE_GETCWD 1
>| #define LAM_HAVE_YIELD 0
>| #define LAM_HAVE_SNPRINTF 1
>| #define LAM_HAVE_ATOLL 0
>| #define LAM_HAVE_STRTOLL 1
>| #define LAM_HAVE_SCHED_YIELD 1
>| #define LAM_HAVE_VSCANF 1
>| #define LAM_HAVE_VA_COPY 1
>| #define LAM_HAVE_UNDERSCORE_VA_COPY 1
>| #define LAM_WANT_PREFIX_MEMCPY 0
>| #define LAM_HAVE_SYSV_SEMAPHORES 1
>| #define LAM_HAVE_SYSV_SHMEM 1
>| #define LAM_HAVE_SOLARIS_THREADS 0
>| #define LAM_HAVE_POSIX_THREADS 1
>| #define LAM_THREADS_HAVE_DIFFERENT_PIDS 0
>| #define LAM_HAVE_BSD43_FD_PASSING 0
>| /* end confdefs.h. */
>| #include <sys/types.h>
>| #include <sys/socket.h>
>| #include <sys/un.h>
>| int
>| main ()
>| {
>| struct cmsghdr c;
>| struct msghdr m;
>| c.cmsg_type = 0;
>| m.msg_control = 0;
>| ;
>| return 0;
>| }
>configure:19013: result: no
>configure:19236: checking for BSD 4.4 fd passing support
>configure:19238: result: no
>configure:19300: checking for System V Release 4 for struct strrecvfd
>configure:19320: cc -c -O3 -DLAM_BUILDING=1 -D_REENTRANT conftest.c >&5
>conftest.c:145:25: sys/stropts.h: No such file or directory
>conftest.c: In function `main':
>conftest.c:149: error: storage size of `c' isn't known
>configure:19326: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| #define LAM_HAVE_UNION_SEMUN 0
>| #define LAM_NEED_SYS_SELECT_H 1
>| #define LAM_HAVE_OPENPTY 1
>| #define LAM_HAVE_ATEXIT 1
>| #define LAM_HAVE_GETCWD 1
>| #define LAM_HAVE_YIELD 0
>| #define LAM_HAVE_SNPRINTF 1
>| #define LAM_HAVE_ATOLL 0
>| #define LAM_HAVE_STRTOLL 1
>| #define LAM_HAVE_SCHED_YIELD 1
>| #define LAM_HAVE_VSCANF 1
>| #define LAM_HAVE_VA_COPY 1
>| #define LAM_HAVE_UNDERSCORE_VA_COPY 1
>| #define LAM_WANT_PREFIX_MEMCPY 0
>| #define LAM_HAVE_SYSV_SEMAPHORES 1
>| #define LAM_HAVE_SYSV_SHMEM 1
>| #define LAM_HAVE_SOLARIS_THREADS 0
>| #define LAM_HAVE_POSIX_THREADS 1
>| #define LAM_THREADS_HAVE_DIFFERENT_PIDS 0
>| #define LAM_HAVE_BSD43_FD_PASSING 0
>| #define LAM_HAVE_RFC2292_FD_PASSING 0
>| #define LAM_HAVE_POSIX_1G_FD_PASSING 0
>| /* end confdefs.h. */
>| #include <sys/types.h>
>| #include <sys/socket.h>
>| #include <sys/stropts.h>
>| int
>| main ()
>| {
>| struct strrecvfd c; c.fd = 0;
>| ;
>| return 0;
>| }
>configure:19349: result: no
>configure:19470: checking for System V Release 4 fd passing support
>configure:19472: result: no
>configure:19533: checking for BSD ptys
>configure:19549: result: no
>configure:19552: checking for SYSV ptys
>configure:19568: result: yes
>configure:19585: checking size of struct stat members
>configure:19605: result: 4
>configure:19625: checking type of getsockopt optlen parameter
>#include <sys/types.h>
>#include <sys/socket.h>
>int foobar(void *optval);
>int foobar(void *optval)
>{
> socklen_t optlen=0;
> return getsockopt(0, SOL_SOCKET, SO_SNDBUF, optval, &optlen);
>}
>configure:19670: result: socklen_t
>configure:19689: checking type of recvfrom length parameter
>#include <sys/types.h>
>#include <sys/socket.h>
>int foobar(void *buffer)
>{
> socklen_t optlen=0;
> return recvfrom(0, buffer, 0, 0, (struct sockaddr*) 0, &optlen);
>}
>configure:19733: result: socklen_t
>configure:19773: checking if build filesystem is case sensitive
>configure:19789: result: no
>configure:19798: checking if configuring for case sensitive fs
>configure:19819: result: no
>configure:19864: checking if want MPI C++ bindings
>configure:19867: result: enabled
>configure:19987: checking size of int
>configure:20010: CC -o conftest.exe -O3 -DLAM_BUILDING=1 -D_REENTRANT conftest.cc >&5
>configure:20013: $? = 0
>configure:20015: ./conftest.exe
>configure:20018: $? = 0
>configure:20032: result: 4
>configure:20060: checking size of bool
>configure:20083: CC -o conftest.exe -O3 -DLAM_BUILDING=1 -D_REENTRANT conftest.cc >&5
>configure:20086: $? = 0
>configure:20088: ./conftest.exe
>configure:20091: $? = 0
>configure:20105: result: 1
>configure:20141: checking type of MPI attributes
>configure:20160: CC -o conftest.exe -O3 -DLAM_BUILDING=1 -D_REENTRANT conftest.cc -lcygipc >&5
>configure:20163: $? = 0
>configure:20165: ./conftest.exe
>configure:20168: $? = 0
>configure:20196: result: int
>configure:20205: checking for signal declaration
>configure:20228: CC -c -O3 -DLAM_BUILDING=1 -D_REENTRANT conftest.cc >&5
>conftest.cc: In function `int main()':
>conftest.cc:159: error: invalid conversion from `void (*)(int, int,
> sigcontext*, char*)' to `void (*)(int)'
>conftest.cc:161: error: invalid conversion from `void (*)(int, int,
> sigcontext*, char*)' to `void (*)(int)'
>configure:20234: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| #define LAM_HAVE_UNION_SEMUN 0
>| #define LAM_NEED_SYS_SELECT_H 1
>| #define LAM_HAVE_OPENPTY 1
>| #define LAM_HAVE_ATEXIT 1
>| #define LAM_HAVE_GETCWD 1
>| #define LAM_HAVE_YIELD 0
>| #define LAM_HAVE_SNPRINTF 1
>| #define LAM_HAVE_ATOLL 0
>| #define LAM_HAVE_STRTOLL 1
>| #define LAM_HAVE_SCHED_YIELD 1
>| #define LAM_HAVE_VSCANF 1
>| #define LAM_HAVE_VA_COPY 1
>| #define LAM_HAVE_UNDERSCORE_VA_COPY 1
>| #define LAM_WANT_PREFIX_MEMCPY 0
>| #define LAM_HAVE_SYSV_SEMAPHORES 1
>| #define LAM_HAVE_SYSV_SHMEM 1
>| #define LAM_HAVE_SOLARIS_THREADS 0
>| #define LAM_HAVE_POSIX_THREADS 1
>| #define LAM_THREADS_HAVE_DIFFERENT_PIDS 0
>| #define LAM_HAVE_BSD43_FD_PASSING 0
>| #define LAM_HAVE_RFC2292_FD_PASSING 0
>| #define LAM_HAVE_POSIX_1G_FD_PASSING 0
>| #define LAM_HAVE_SVR4_FD_PASSING 0
>| #define LAM_HAVE_FD_PASSING 0
>| #define LAM_HAVE_BSD_PTYS 0
>| #define LAM_HAVE_SYSV_PTYS 1
>| #define LAM_STAT_MEMBERS_INT4 1
>| #define LAM_SOCK_OPTLEN_T socklen_t
>| #define LAM_RECVFROM_LEN_T socklen_t
>| #define MPI2CPP_SIZEOF_INT 4
>| #define MPI2CPP_SIZEOF_BOOL_T 1
>| #define MPI2CPP_ATTR int
>| /* end confdefs.h. */
>| #include<signal.h>
>| extern "C" void bsd_handler(int sig, int code, struct sigcontext *scp, char *addr);
>|
>| int
>| main ()
>| {
>| signal(1, bsd_handler);
>| struct sigaction n;
>| n.sa_handler= bsd_handler;
>|
>| ;
>| return 0;
>| }
>configure:20297: CC -c -O3 -DLAM_BUILDING=1 -D_REENTRANT conftest.cc >&5
>configure:20303: $? = 0
>configure:20307: test -z
> || test ! -s conftest.err
>configure:20310: $? = 0
>configure:20313: test -s conftest.o
>configure:20316: $? = 0
>configure:20335: result: SYSV
>configure:20364: checking if want ROMIO
>configure:20370: result: disabled
>configure:20385: checking if want TotalView attach support
>configure:20388: result: enabled
>configure:20405: checking if want TotalView queue debugging support
>configure:20429: result: enabled
>configure:20564: checking for bproc_numnodes in -lbproc
>configure:20594: cc -o conftest.exe -O3 -DLAM_BUILDING=1 -D_REENTRANT conftest.c -lbproc -lcygipc >&5
>/usr/lib/gcc-lib/i686-pc-cygwin/3.3.1/../../../../i686-pc-cygwin/bin/ld: cannot find -lbproc
>collect2: ld returned 1 exit status
>configure:20600: $? = 1
>configure: failed program was:
>| /* confdefs.h. */
>|
>| #define PACKAGE_NAME ""
>| #define PACKAGE_TARNAME ""
>| #define PACKAGE_VERSION ""
>| #define PACKAGE_STRING ""
>| #define PACKAGE_BUGREPORT ""
>| #define LAM_MAJOR_VERSION 7
>| #define LAM_MINOR_VERSION 1
>| #define LAM_RELEASE_VERSION 0
>| #define LAM_ALPHA_VERSION 1
>| #define LAM_BETA_VERSION 0
>| #define LAM_CVS_VERSION 20040106
>| #define LAM_VERSION "7.1a1cvs20040106"
>| #define LAM_DEPENDENCY_PREFIX "NONE"
>| #define LAM_ARCH "i686-pc-cygwin"
>| #define LAM_WANT_DEBUG 0
>| #define LAM_CC "cc"
>| #define LAM_CONFIG_FORCE_PROTOS 1
>| #define LAM_HAVE_int2 0
>| #define LAM_HAVE_uint2 0
>| #define LAM_HAVE_int4 0
>| #define LAM_HAVE_uint4 0
>| #define LAM_HAVE_int8 0
>| #define LAM_HAVE_uint8 0
>| #define LAM_HAVE_float4 0
>| #define LAM_HAVE_float8 0
>| #define LAM_SIZEOF_CHAR 1
>| #define LAM_SIZEOF_SHORT 2
>| #define LAM_SIZEOF_WCHAR 2
>| #define LAM_SIZEOF_INT 4
>| #define LAM_SIZEOF_LONG 4
>| #define LAM_SIZEOF_LONG_LONG 8
>| #define LAM_SIZEOF_FLOAT 4
>| #define LAM_SIZEOF_DOUBLE 8
>| #define LAM_SIZEOF_LONG_DOUBLE 12
>| #define LAM_SIZEOF_VOID_P 4
>| #define LAM_ALIGNMENT_CHAR 1
>| #define LAM_ALIGNMENT_SHORT 2
>| #define LAM_ALIGNMENT_WCHAR 2
>| #define LAM_ALIGNMENT_INT 4
>| #define LAM_ALIGNMENT_LONG 4
>| #define LAM_ALIGNMENT_LONG_LONG 8
>| #define LAM_ALIGNMENT_FLOAT 4
>| #define LAM_ALIGNMENT_DOUBLE 8
>| #define LAM_ALIGNMENT_LONG_DOUBLE 4
>| #define LAM_ALIGNMENT_VOID_P 4
>| #ifdef __cplusplus
>| extern "C" void std::exit (int) throw (); using std::exit;
>| #endif
>| #define LAM_CXX "CC"
>| #define LAM_HAVE_CPP_EXCEPTION_SUPPORT 0
>| #define LAM_CXX_NOTHROW_NEW 0
>| #define LAM_CXX_NOTHROW_NEW_ARG
>| #define STDC_HEADERS 1
>| #define HAVE_SYS_TYPES_H 1
>| #define HAVE_SYS_STAT_H 1
>| #define HAVE_STDLIB_H 1
>| #define HAVE_STRING_H 1
>| #define HAVE_MEMORY_H 1
>| #define HAVE_STRINGS_H 1
>| #define HAVE_INTTYPES_H 1
>| #define HAVE_STDINT_H 1
>| #define HAVE_UNISTD_H 1
>| #define LAM_CXX_STL 1
>| #define LAM_CXX_BOOL 1
>| #define LAM_CXX_TRUE_FALSE 1
>| #define LAM_SIZEOF_CXX_BOOL 1
>| #define LAM_SIZEOF_CXX_INT 4
>| #define LAM_ALIGNMENT_CXX_BOOL 1
>| #define LAM_ALIGNMENT_CXX_INT 4
>| #define LAM_CXX_BOOL_TYPE unsigned char
>| #define LAM_FORTRANDOUBLEUNDERSCORE 1
>| #define LAM_FORTRANUNDERSCORE 0
>| #define LAM_FORTRANCAPS 0
>| #define LAM_FORTRANNOUNDERSCORE 0
>| #define LAM_SIZEOF_FORTRAN_INT 4
>| #define LAM_SIZEOF_FORTRAN_REAL 4
>| #define LAM_SIZEOF_FORTRAN_DBLPREC 8
>| #define LAM_SIZEOF_FORTRAN_COMPLEX 8
>| #define LAM_SIZEOF_FORTRAN_DBLCOMPLEX 16
>| #define LAM_ALIGNMENT_FORTRAN_INT 4
>| #define LAM_ALIGNMENT_FORTRAN_REAL 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLPREC 8
>| #define LAM_ALIGNMENT_FORTRAN_COMPLEX 4
>| #define LAM_ALIGNMENT_FORTRAN_DBLCOMPLEX 8
>| #define LAM_FLIBPATH "-L"
>| #define LAM_WANT_PROFILE 1
>| #define LAM_WANT_TRILLIUM_INSTALL 0
>| #define LAM_WANT_ROMIO 0
>| #define HAVE_LIBAIO 0
>| #define LAM_WANT_FORTRAN 1
>| #define LAM_F77 "f77"
>| #define LAM_WANT_MPI2CPP 1
>| #define LAM_WANT_CPPFILE 0
>| #define LAM_WANT_IMPI 0
>| #define LAM_USE_SELECT_YIELD 0
>| #define LAM_SIGUSR SIGUSR2
>| #define LAM_DISINFECT 0
>| #define LAM_TO_BOOT 60
>| #define LAM_TO_DLO_ACK 500000
>| #define LAM_TO_DLO_IDLE 120
>| #define LAM_WANT_MPI_STUBS 0
>| #define LAM_WANT_BOOT_PROMISC_CONNECTIONS 0
>| #define LAM_RM "/usr/bin/rm -f"
>| #define LAM_HAVE_PROTO_snprintf 1
>| #define LAM_HAVE_PROTO_gethostname 1
>| #define HAVE_GRP_H 1
>| #define HAVE_NETINET_TCP_H 1
>| #define HAVE_SYS_SELECT_H 1
>| #define HAVE_SYS_RESOURCE_H 1
>| #define HAVE_RPC_TYPES_H 1
>| #define HAVE_RPC_XDR_H 1
>| #define HAVE_PTY_H 1
>| #define HAVE_SCHED_H 1
>| #define HAVE_STRINGS_H 1
>| #define LAM_HAVE_FIONBIO 0
>| #define LAM_HAVE_SA_RESTART 1
>| #define LAM_HAVE_SA_LEN 0
>| #define LAM_HAVE_UNION_SEMUN 0
>| #define LAM_NEED_SYS_SELECT_H 1
>| #define LAM_HAVE_OPENPTY 1
>| #define LAM_HAVE_ATEXIT 1
>| #define LAM_HAVE_GETCWD 1
>| #define LAM_HAVE_YIELD 0
>| #define LAM_HAVE_SNPRINTF 1
>| #define LAM_HAVE_ATOLL 0
>| #define LAM_HAVE_STRTOLL 1
>| #define LAM_HAVE_SCHED_YIELD 1
>| #define LAM_HAVE_VSCANF 1
>| #define LAM_HAVE_VA_COPY 1
>| #define LAM_HAVE_UNDERSCORE_VA_COPY 1
>| #define LAM_WANT_PREFIX_MEMCPY 0
>| #define LAM_HAVE_SYSV_SEMAPHORES 1
>| #define LAM_HAVE_SYSV_SHMEM 1
>| #define LAM_HAVE_SOLARIS_THREADS 0
>| #define LAM_HAVE_POSIX_THREADS 1
>| #define LAM_THREADS_HAVE_DIFFERENT_PIDS 0
>| #define LAM_HAVE_BSD43_FD_PASSING 0
>| #define LAM_HAVE_RFC2292_FD_PASSING 0
>| #define LAM_HAVE_POSIX_1G_FD_PASSING 0
>| #define LAM_HAVE_SVR4_FD_PASSING 0
>| #define LAM_HAVE_FD_PASSING 0
>| #define LAM_HAVE_BSD_PTYS 0
>| #define LAM_HAVE_SYSV_PTYS 1
>| #define LAM_STAT_MEMBERS_INT4 1
>| #define LAM_SOCK_OPTLEN_T socklen_t
>| #define LAM_RECVFROM_LEN_T socklen_t
>| #define MPI2CPP_SIZEOF_INT 4
>| #define MPI2CPP_SIZEOF_BOOL_T 1
>| #define MPI2CPP_ATTR int
>| #define MPI2CPP_SYSV_SIGNAL 1
>| #define MPI2CPP_BSD_SIGNAL 0
>| /* end confdefs.h. */
>|
>| /* Override any gcc2 internal prototype to avoid an error. */
>| #ifdef __cplusplus
>| extern "C"
>| #endif
>| /* We use char because int might match the return type of a gcc2
>| builtin and then its argument prototype would still apply. */
>| char bproc_numnodes ();
>| int
>| main ()
>| {
>| bproc_numnodes ();
>| ;
>| return 0;
>| }
>configure:20626: result: no
>configure:20804: checking if want BPROC support
>configure:20824: result: no
>configure:20851: checking if want deprecated executable names
>configure:20872: result: yes
>configure:20883: checking for subdir args
>configure:20937: result: '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77'
>configure:20966: LAM configuring in share/totalview
>configure:21062: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21068: /bin/bash './configure' succeeded for share/totalview
>configure:21190: checking which modules should be run-time loadable
>configure:21217: result: none
>configure:21227: checking for SSI kinds
>configure:21252: result: boot coll crlam crmpi rpi
>configure:21375: LAM configuring in share/ssi/boot/bproc
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/boot/bproc
>configure:21558: +++ SSI module boot:bproc compile: yes
>configure:21560: +++ SSI module boot:bproc mode: static
>configure:21375: LAM configuring in share/ssi/boot/globus
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/boot/globus
>configure:21558: +++ SSI module boot:globus compile: yes
>configure:21560: +++ SSI module boot:globus mode: static
>configure:21375: LAM configuring in share/ssi/boot/rsh
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/boot/rsh
>configure:21558: +++ SSI module boot:rsh compile: yes
>configure:21560: +++ SSI module boot:rsh mode: static
>configure:21375: LAM configuring in share/ssi/boot/slurm
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/boot/slurm
>configure:21558: +++ SSI module boot:slurm compile: yes
>configure:21560: +++ SSI module boot:slurm mode: static
>configure:21375: LAM configuring in share/ssi/boot/tm
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/boot/tm
>configure:21558: +++ SSI module boot:tm compile: yes
>configure:21560: +++ SSI module boot:tm mode: static
>configure:21375: LAM configuring in share/ssi/coll/impi
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/coll/impi
>configure:21558: +++ SSI module coll:impi compile: yes
>configure:21560: +++ SSI module coll:impi mode: static
>configure:21375: LAM configuring in share/ssi/coll/lam_basic
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/coll/lam_basic
>configure:21558: +++ SSI module coll:lam_basic compile: yes
>configure:21560: +++ SSI module coll:lam_basic mode: static
>configure:21375: LAM configuring in share/ssi/coll/smp
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/coll/smp
>configure:21558: +++ SSI module coll:smp compile: yes
>configure:21560: +++ SSI module coll:smp mode: static
>configure:21375: LAM configuring in share/ssi/crlam/blcr
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/crlam/blcr
>configure:21558: +++ SSI module crlam:blcr compile: yes
>configure:21560: +++ SSI module crlam:blcr mode: static
>configure:21375: LAM configuring in share/ssi/crmpi/blcr
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/crmpi/blcr
>configure:21558: +++ SSI module crmpi:blcr compile: yes
>configure:21560: +++ SSI module crmpi:blcr mode: static
>configure:21375: LAM configuring in share/ssi/rpi/crtcp
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/rpi/crtcp
>configure:21558: +++ SSI module rpi:crtcp compile: yes
>configure:21560: +++ SSI module rpi:crtcp mode: static
>configure:21375: LAM configuring in share/ssi/rpi/gm
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/rpi/gm
>configure:21558: +++ SSI module rpi:gm compile: yes
>configure:21560: +++ SSI module rpi:gm mode: static
>configure:21375: LAM configuring in share/ssi/rpi/ib
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21481: /bin/bash './configure' *failed* for share/ssi/rpi/ib
>configure:21594: --- SSI module rpi:ib compile: no
>configure:21375: LAM configuring in share/ssi/rpi/lamd
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/rpi/lamd
>configure:21558: +++ SSI module rpi:lamd compile: yes
>configure:21560: +++ SSI module rpi:lamd mode: static
>configure:21375: LAM configuring in share/ssi/rpi/sysv
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/rpi/sysv
>configure:21558: +++ SSI module rpi:sysv compile: yes
>configure:21560: +++ SSI module rpi:sysv mode: static
>configure:21375: LAM configuring in share/ssi/rpi/tcp
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/rpi/tcp
>configure:21558: +++ SSI module rpi:tcp compile: yes
>configure:21560: +++ SSI module rpi:tcp mode: static
>configure:21375: LAM configuring in share/ssi/rpi/usysv
>configure:21471: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --cache-file=/dev/null --srcdir=.
>configure:21477: /bin/bash './configure' succeeded for share/ssi/rpi/usysv
>configure:21558: +++ SSI module rpi:usysv compile: yes
>configure:21560: +++ SSI module rpi:usysv mode: static
>configure:21783: checking for a sed that does not truncate output
>configure:21837: result: /usr/bin/sed
>configure:21851: checking for ld used by cc
>configure:21918: result: /usr/i686-pc-cygwin/bin/ld.exe
>configure:21927: checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld
>configure:21942: result: yes
>configure:21947: checking for /usr/i686-pc-cygwin/bin/ld.exe option to reload object files
>configure:21954: result: -r
>configure:21963: checking for BSD-compatible nm
>configure:22005: result: /usr/bin/nm -B
>configure:22009: checking how to recognise dependent libraries
>configure:22209: result: file_magic ^x86 archive import|^x86 DLL
>configure:22431: checking dlfcn.h usability
>configure:22443: cc -c -O3 -I$(top_srcdir)/share/include -DLAM_BUILDING=1 -D_REENTRANT conftest.c >&5
>configure:22449: $? = 0
>configure:22453: test -z
> || test ! -s conftest.err
>configure:22456: $? = 0
>configure:22459: test -s conftest.o
>configure:22462: $? = 0
>configure:22472: result: yes
>configure:22476: checking dlfcn.h presence
>configure:22486: cc -E -I$(top_srcdir)/share/include -DLAM_BUILDING=1 -D_REENTRANT conftest.c
>configure:22492: $? = 0
>configure:22512: result: yes
>configure:22547: checking for dlfcn.h
>configure:22554: result: yes
>configure:22662: checking for Fortran 77 compiler version
>configure:22662: f77 --version </dev/null >&5
>GNU Fortran (GCC) 3.3.1 (cygming special)
>Copyright (C) 2002 Free Software Foundation, Inc.
>
>GNU Fortran comes with NO WARRANTY, to the extent permitted by law.
>You may redistribute copies of GNU Fortran
>under the terms of the GNU General Public License.
>For more information about these matters, see the file named COPYING
>or type the command `info -f g77 Copying'.
>configure:22665: $? = 0
>configure:22667: f77 -v </dev/null >&5
>Reading specs from /usr/lib/gcc-lib/i686-pc-cygwin/3.3.1/specs
>Configured with: /GCC/gcc-3.3.1-3/configure --with-gcc --with-gnu-ld --with-gnu-as --prefix=/usr --exec-prefix=/usr --sysconfdir=/etc --libdir=/usr/lib --libexecdir=/usr/sbin --mandir=/usr/share/man --infodir=/usr/share/info --enable-languages=c,ada,c++,f77,pascal,java,objc --enable-libgcj --enable-threads=posix --with-system-zlib --enable-nls --without-included-gettext --enable-interpreter --enable-sjlj-exceptions --disable-version-specific-runtime-libs --enable-shared --disable-win32-registry --enable-java-gc=boehm --disable-hash-synchronization --verbose --target=i686-pc-cygwin --host=i686-pc-cygwin --build=i686-pc-cygwin
>Thread model: posix
>gcc version 3.3.1 (cygming special)
>configure:22670: $? = 0
>configure:22672: f77 -V </dev/null >&5
>f77: `-V' option must have argument
>configure:22675: $? = 1
>configure:22683: checking whether we are using the GNU Fortran 77 compiler
>configure:22697: f77 -c -O conftest.F >&5
>configure:22703: $? = 0
>configure:22707: test -z
> || test ! -s conftest.err
>configure:22710: $? = 0
>configure:22713: test -s conftest.o
>configure:22716: $? = 0
>configure:22729: result: yes
>configure:22735: checking whether f77 accepts -g
>configure:22747: f77 -c -g conftest.f >&5
>configure:22753: $? = 0
>configure:22757: test -z
> || test ! -s conftest.err
>configure:22760: $? = 0
>configure:22763: test -s conftest.o
>configure:22766: $? = 0
>configure:22778: result: yes
>configure:22808: checking the maximum length of command line arguments
>configure:22867: result: 8192
>configure:22878: checking command to parse /usr/bin/nm -B output from cc object
>configure:22967: cc -c -O3 -I$(top_srcdir)/share/include -DLAM_BUILDING=1 -D_REENTRANT conftest.c >&5
>configure:22970: $? = 0
>configure:22974: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGISTW][ABCDGISTW]*\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' \> conftest.nm
>configure:22977: $? = 0
>cannot find nm_test_var in conftest.nm
>configure:22967: cc -c -O3 -I$(top_srcdir)/share/include -DLAM_BUILDING=1 -D_REENTRANT conftest.c >&5
>configure:22970: $? = 0
>configure:22974: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGISTW][ABCDGISTW]*\)[ ][ ]*\(_\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' \> conftest.nm
>configure:22977: $? = 0
>configure:23029: cc -o conftest.exe -O3 -I$(top_srcdir)/share/include -DLAM_BUILDING=1 -D_REENTRANT conftest.c conftstm.o >&5
>configure:23032: $? = 0
>configure:23070: result: ok
>configure:23074: checking for objdir
>configure:23089: result: .libs
>configure:23179: checking for ar
>configure:23195: found /usr/bin/ar
>configure:23206: result: ar
>configure:23259: checking for ranlib
>configure:23275: found /usr/bin/ranlib
>configure:23286: result: ranlib
>configure:23339: checking for strip
>configure:23355: found /usr/bin/strip
>configure:23366: result: strip
>configure:23628: checking if cc static flag works
>configure:23651: result: yes
>configure:23668: checking if cc supports -fno-rtti -fno-exceptions
>configure:23689: cc -c -O3 -I$(top_srcdir)/share/include -DLAM_BUILDING=1 -D_REENTRANT -fno-rtti -fno-exceptions conftest.c >&5
>cc1: warning: "-fno-rtti" is valid for C++ but not for C/ObjC
>configure:23693: $? = 0
>configure:23701: result: no
>configure:23716: checking for cc option to produce PIC
>configure:23893: result:
>configure:23957: checking if cc supports -c -o file.o
>configure:23988: cc -c -O3 -I$(top_srcdir)/share/include -DLAM_BUILDING=1 -D_REENTRANT -o out/conftest2.o conftest.c >&5
>configure:23992: $? = 0
>configure:24006: result: yes
>configure:24032: checking whether the cc linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries
>configure:24846: result: yes
>configure:24917: checking how to hardcode library paths into programs
>configure:24942: result: immediate
>configure:24956: checking whether stripping libraries is possible
>configure:24961: result: yes
>configure:24983: checking dynamic linker characteristics
>configure:25494: result: Win32 ld.exe
>configure:26092: checking whether a program can dlopen itself
>configure:26164: cc -o conftest.exe -O3 -I$(top_srcdir)/share/include -DLAM_BUILDING=1 -D_REENTRANT -DHAVE_DLFCN_H --export-dynamic conftest.c -lcygipc >&5
>cc1: error: unrecognized option `-fexport-dynamic'
>configure:26167: $? = 1
>configure:26185: result: no
>configure:26306: checking if libtool supports shared libraries
>configure:26308: result: yes
>configure:26311: checking whether to build shared libraries
>configure:26360: result: no
>configure:26363: checking whether to build static libraries
>configure:26367: result: yes
>configure:26458: creating libtool
>configure:27002: checking for ld used by CC
>configure:27069: result: /usr/i686-pc-cygwin/bin/ld.exe
>configure:27078: checking if the linker (/usr/i686-pc-cygwin/bin/ld.exe) is GNU ld
>configure:27093: result: yes
>configure:27144: checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries
>configure:27959: result: yes
>configure:27977: CC -c -O3 -I$(top_srcdir)/share/include -DLAM_BUILDING=1 -D_REENTRANT conftest.cc >&5
>configure:27980: $? = 0
>configure:28076: checking for CC option to produce PIC
>configure:28328: result:
>configure:28392: checking if CC supports -c -o file.o
>configure:28423: CC -c -O3 -I$(top_srcdir)/share/include -DLAM_BUILDING=1 -D_REENTRANT -o out/conftest2.o conftest.cc >&5
>configure:28427: $? = 0
>configure:28441: result: yes
>configure:28467: checking whether the CC linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries
>configure:28492: result: yes
>configure:28563: checking how to hardcode library paths into programs
>configure:28588: result: immediate
>configure:28602: checking whether stripping libraries is possible
>configure:28607: result: yes
>configure:28629: checking dynamic linker characteristics
>configure:29140: result: Win32 ld.exe
>configure:29738: checking whether a program can dlopen itself
>configure:29831: result: no
>configure:30425: checking if libtool supports shared libraries
>configure:30427: result: yes
>configure:30430: checking whether to build shared libraries
>configure:30448: result: no
>configure:30451: checking whether to build static libraries
>configure:30455: result: yes
>configure:30467: checking for f77 option to produce PIC
>configure:30644: result:
>configure:30708: checking if f77 supports -c -o file.o
>configure:30739: f77 -c -O -o out/conftest2.o conftest.f >&5
>configure:30743: $? = 0
>configure:30757: result: yes
>configure:30783: checking whether the f77 linker (/usr/i686-pc-cygwin/bin/ld.exe) supports shared libraries
>configure:31577: result: yes
>configure:31648: checking how to hardcode library paths into programs
>configure:31673: result: immediate
>configure:31687: checking whether stripping libraries is possible
>configure:31692: result: yes
>configure:31714: checking dynamic linker characteristics
>configure:32225: result: Win32 ld.exe
>configure:36270: LAM configuring in share/libltdl
>configure:36366: running /bin/bash './configure' '--without-romio' 'CC=cc' 'CXX=CC' 'FC=f77' --enable-ltdl-convenience --disable-ltdl-install --disable-shared --enable-static --cache-file=/dev/null --srcdir=.
>configure:36372: /bin/bash './configure' succeeded for share/libltdl
>configure:36407: checking for libtool-supplied linker flags
>configure:36439: /cygdrive/c/home/e176/tools/lam-7.1a1cvs20040106/share/libltdl/libtool --mode=compile cc -O3 foo.c -c -o foo.o
> cc -O3 foo.c -c -o foo.o
>configure:36452: $? = 0
>configure:36439: /cygdrive/c/home/e176/tools/lam-7.1a1cvs20040106/share/libltdl/libtool --mode=link cc -O3 foo.lo -lcygipc -o libfoo.la
>mkdir .libs
>ar cru .libs/libfoo.a foo.o
>ranlib .libs/libfoo.a
>creating libfoo.la
>(cd .libs && rm -f libfoo.la && ln -s ../libfoo.la libfoo.la)
>configure:36452: $? = 0
>configure:36439: /cygdrive/c/home/e176/tools/lam-7.1a1cvs20040106/share/libltdl/libtool --dry-run --mode=link cc bar.lo libfoo.la -o bar -export-dynamic
>cc bar.o -o bar.exe -Wl,--export-dynamic ./.libs/libfoo.a -lcygipc
>configure:36452: $? = 0
>configure:36498: result: -Wl,--export-dynamic -lcygipc
>configure:36569: checking if want extra wrapper compiler LDFLAGS
>configure:36576: result: no (shared libs disabled)
>configure:37205: checking which of CFLAGS are ok for TotalView modules
>configure:37207: result:
>configure:37209: checking extra CFLAGS for TotalView modules
>configure:37211: result: -g
>configure:37446: creating ./config.status
>
>## ---------------------- ##
>## Running config.status. ##
>## ---------------------- ##
>
>This file was extended by config.status, which was
>generated by GNU Autoconf 2.59. Invocation command line was
>
> CONFIG_FILES =
> CONFIG_HEADERS =
> CONFIG_LINKS =
> CONFIG_COMMANDS =
> $ ./config.status
>
>on tynrachel2
>
>config.status:932: creating Makefile
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>This list is archived at http://www.lam-mpi.org/MailArchives/lam/
>
>
|
